Thermogravimetry and insitu mass spectrometry at high temperatures compared to thermochemical modelling – The weight loss during selective decarburisation at 800°C
Source abstract
Abstract
Abstract The insitu mass spectrometry detection of volatile species during high temperature corrosion processes, exemplified by decarburisation of plain carbon steel, will be presented. Without influencing the thermobalance signal, changes of the gas composition can be measured by introducing a small quartz capillary into the reaction chamber in close proximity to the sample surface. Experiments with the eutectoid composition Fe, 0.8 wt% C have been chosen intentionally as this alloy represents one of the most intensely studied compositions in steel research. This allows good verification with commonly accepted knowledge. Furthermore, comparison between experimental observations and theoretical simulations will be given and critically discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Metallurgical Processes and Thermodynamics · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. High temperature corrosion of high alloy steels in simulated waste incineration environments10.1002/maco.19960470402 ↗
2. Fireside corrosion of superheaters: Effects of air and oxy-firing of coal and biomass10.1016/j.fuel.2011.03.010 ↗
3. Evaluation of iron-aluminide CVD coatings for high temperature corrosion protection10.3184/096034001783640559 ↗
4. Determination of corrosion layers and protective coatings on steels and alloys used in simulated service environment of modern power plants10.1115/1.2137769 ↗
5. Carburisation of ferritic Fe-Cr alloys by low carbon activity gases10.1016/j.corsci.2011.05.013 ↗
6. Nucleation and growth of selective oxide particles on ferritic steel10.1016/j.corsci.2010.03.030 ↗
7. Oxidation of iron at 400–600°C in dry and wet O210.1016/j.corsci.2010.01.002 ↗
8. Review of the high-temperature oxidation of iron and carbon steels in air or oxygen10.1023/A:1023685905159 ↗
9. The oxidation of iron–chromium–manganese alloys at 900°C10.1007/BF00938460 ↗
10. The effect of manganese and chromium on surface oxidation products formed during batch annealing of low carbon steel strip10.1016/j.corsci.2006.06.013 ↗
11. The nitriding behaviour of iron–chromium–carbon alloys10.1007/BF00559347 ↗
12. Surface and grain boundary segregation an and in iron and steels10.2355/isijinternational.29.529 ↗
13. Effect of water vapour on the oxidation of Fe–13Cr–5Ni martensitic alloy at 973K10.1016/j.corsci.2012.04.008 ↗
14. The effects of thin surface-applied oxide coating films on the selective oxidation of alloys10.1016/S0010-938X(96)00049-2 ↗
15. Carburization behaviour of Mn–Cr–O spinel in high temperature hydrocarbon cracking environment10.1016/j.corsci.2009.06.006 ↗
16. Oxidation of 310 steel in H2O/O2 mixtures at 600 °C: the effect of water–vapour-enhanced chromium evaporation10.1016/S0010-938X(02)00056-2 ↗
17. Investigation of decarburisation in spring steel production process – part i: experiments
18. Modelling the thermal oxidation of ternary alloys – compositional changes in the alloy and the development of oxide phases10.1016/S1359-6454(03)00381-1 ↗
19. A finite-difference model to predict 2D depletion profiles arising from high temperature oxidation of alloys10.1088/0965-0393/14/4/014 ↗
20. Investigation of decarburisation in spring steel production process – part ii: simulation
21. Modelling high temperature oxidation in iron–chromium systems: combined kinetic and thermodynamic calculation of the long-term behaviour and experimental verification10.1007/s11085-011-9252-8 ↗
22. Grabke · 2007
23. Young · 2008
24. A novel laboratory set-up for investigating surface and interface reactions during short term annealing cycles at high temperatures10.1063/1.4817310 ↗
25. Bramfitt · 2002
26. Calculation of diffusion penetration curves for surface and grain boundary diffusion10.1063/1.1699825 ↗
27. Solubility, permeability, and diffusivity of oxygen in solid iron
28. Mehrer · 1990 · vol. 26
29. Computer-simulation study of high-temperature phase stability in iron10.1103/PhysRevB.57.755 ↗
30. Thermodynamic roles of metallic elements in carburization and metal dusting10.1023/B:OXID.0000025338.74215.31 ↗
31. Volume and grain boundary diffusion of 14C in a-Fe10.1002/pssa.2211270109 ↗
32. Kaur · 1995
33. Modelling diffusional growth during austenite decomposition to ferrite in polycrystalline Fe–C alloys10.1016/0956-7151(90)90257-H ↗