CO2 corrosion resistance of low-alloy steel tempered at different temperatures
Source abstract
Abstract
The microstructure and corrosion resistance in a CO2-saturated salt solution have been examined for a low-alloy steel subjected to different tempering treatments. It is found that corrosion resistance increases with increasing tempering temperature from 300°C to 600°C. Tempering at the different temperatures affects the formation of the corrosion scale. Comparing different samples after corrosion tests, iron oxy-hydroxide chloride is found to be more prevalent in the sample tempered at 600°C. This sample also demonstrates delayed development of a semi-protective iron carbonate layer. Cementite lamellae produced by high-temperature tempering enable increased retention of Fe2+ ions and thus restoration of dissolved scale.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. A systematic approach to hostile environments10.2118/0708-0034-JPT ↗
2. Corrosion problems during oil and gas production and its mitigation10.1186/2228-5547-4-35 ↗
3. Carbon dioxide corrosion of oil and gas field equipment10.1007/s11124-005-0011-6 ↗
4. Carbon dioxide corrosion in oil and gas production—A compendium10.5006/1.3277596 ↗
5. Effect of pH on CO2 corrosion of mild steel at elevated temperatures
6. An experimental and theoretical investigation of the influence of surface roughness on corrosion in CO2 environments
7. L.G.S. Gray, B.G. Anderson, M.J. Danysh, P.R. Tremaine, Effect of pH and temperature on the mechanism of carbon steel corrosion by aqueous carbon dioxide, Paper No. 40,Corrosion (1990).
8. K. Videm, The influence of pH and concentration of bicarbonate and ferrous ions on the CO2 corrosion of carbon steels, in: NACE New Orleans, 1993.
9. The effect of temperature and ionic strength on iron carbonate (FeCO3) solubility limit10.1016/j.corsci.2009.03.009 ↗
10. Kermani · 1997
11. Corrosion in petroleum production operations
12. The influence of microstructure on the corrosion rate of various carbon steels10.1007/s10800-004-6207-7 ↗
13. The influence of microstructure and chemical composition of carbon and low alloy steels in CO2 corrosion. A state-of-the-art appraisal10.1016/S0261-3069(03)00158-4 ↗
14. A. Dugstad, H. Hemmer, M. Seiersten, Effect of steel microstructure upon corrosion rate and protective iron carbonate film formation, NACE - Int. Corros. Conf. Ser. 2000-March (2000).10.5006/1.3290361 ↗
15. Effect of microstructure on corrosion of steels in aqueous solutions containing carbon dioxide10.5006/1.3284876 ↗
16. Ex-situ synchrotron X-ray diffraction study of CO2 corrosion-induced surface scales developed in low-alloy steel with different initial microstructure10.1016/j.corsci.2023.111387 ↗
17. Effect of microstructure of low-alloy steel on corrosion propagation in a simulated CO2 environment10.1149/1945-7111/aca127 ↗
18. The effect of cooling rate-induced microstructural changes on CO2 corrosion of low alloy steel10.1016/j.corsci.2022.110769 ↗
19. CO2 corrosion behavior of 1% Cr–13% Cr steel in relation to Cr content changes
20. Effect of free Cr content on corrosion behavior of 3Cr steels in a CO2 environment10.1016/j.apsusc.2017.06.320 ↗
21. Effect of Cr content on the corrosion performance of low-Cr alloy steel in a CO2 environment10.1016/j.apsusc.2016.04.049 ↗
22. The impact of minor Cr additions in low alloy steel on corrosion behavior in simulated well environment10.1038/s41529-023-00393-y ↗
23. Designing steel to resist hydrogen embrittlement: part 1–trapping capacity10.1080/02670836.2018.1475919 ↗
24. Corrosion of simulated weld HAZ of API X-80 pipeline steel10.1016/j.corsci.2012.06.014 ↗
25. Pitting corrosion in pipeline steel weld zones10.1016/j.corsci.2011.08.005 ↗
26. Micro-electrochemical characterization of corrosion of welded X70 pipeline steel in near-neutral pH solution10.1016/j.corsci.2009.04.030 ↗
27. Influence of heat treatment on the corrosion of high speed steel10.1023/A:1004157623466 ↗
28. Experimental investigation of galvanic corrosion: comparison between SVET and immersion techniques10.1016/j.corsci.2010.04.023 ↗
29. Numerical modelling of the galvanic coupling in aluminium alloys: a discussion on the application of local probe techniques10.1016/j.corsci.2009.08.051 ↗
30. The effect of tempering temperature on the microstructure and electrochemical properties of a 13 wt% Cr-type martensitic stainless steel10.1016/j.electacta.2015.02.038 ↗
31. Hydrogen diffusion and trapping in A 42CrMo4 quenched and tempered steel: influence of tempering temperature10.1016/j.ijhydene.2020.08.134 ↗
32. Effect of tempering temperature on the low temperature impact toughness of 42CrMo4-V steel
33. The effect of heat treatment on mechanical properties of 42CrMo4 steel
34. Quenchant oil viscosity and tempering temperature effect on mechanical properties of 42CrMo4 steel10.1016/j.jmrt.2021.11.152 ↗
35. Effect of tempering heat treatment on the CO2 corrosion resistance of quench-hardened Cr-Mo low-alloy steels for oil and gas applications10.1016/j.corsci.2019.03.036 ↗
36. In situ corrosion characterization of simulated weld heat affected zone on API X80 pipeline steel10.1016/j.corsci.2014.04.053 ↗
37. Investigation on microstructural, mechanical, and electrochemical properties of water, brine quenched and tempered low carbon steel
38. Corrosion behaviour of tempered 42CrMo4 steel
39. Corrosion characteristics of simulated reheated heat-affected-zone of X80 pipeline steel in carbonate/bicarbonate solution10.1016/j.corsci.2022.110856 ↗
40. Investigation for the Influence of CO2 on the Corrosion Behavior of 42CrMo Steel through Heat Treatment
41. Corrosion behavior of low-alloy steel with martensite/ferrite microstructure at vapor-saturated CO2 and CO2 -saturated brine conditions10.1016/j.apsusc.2015.06.006 ↗
42. Corrosion behavior of low-alloy steel containing 1% chromium in CO2 environments10.1016/j.corsci.2013.06.024 ↗
43. A new narrative for CO2 corrosion of mild steel10.1149/2.0071911jes ↗
44. Mechanism of protective film formation during CO2 corrosion of X65 pipeline steel
45. The effects of temperature and pH on the characteristics of corrosion product in CO2 corrosion of grade X70 steel10.1016/j.matdes.2010.01.038 ↗
46. Modeling of uniform CO2 corrosion of mild steel in gas transportation systems: a review10.1016/j.jngse.2015.12.052 ↗
47. Iron carbonate formation kinetics onto corroding and pre-filmed carbon steel surfaces in carbon dioxide corrosion environments10.1016/j.apsusc.2018.10.238 ↗
48. The electrode kinetics of the deposition and dissolution of iron10.1016/0013-4686(61)80026-1 ↗
49. A theoretical treatment of the kinetics of iron dissolution and passivation10.1016/0013-4686(75)90005-5 ↗
50. S. Yean, H. Al Saiari, A.T. Kan, M.B. Tomson, Ferrous carbonate nucleation and inhibition, Soc. Pet. Eng. - 9th Int. Conf. Oilf. Scale 2008 - “Managing Scale Through F. Lifetime.” (2008) 531–549. https://doi.org/10.2118/114124-ms.10.2118/114124-MS ↗
51. M.B. Tomson, M.L. Johnson, How ferrous carbonate kinetics impacts oilfield corrosion, (1991) 257–264. https://doi.org/10.2523/21025-ms.10.2118/21025-MS ↗
52. An electrochemical and X-ray computed tomography investigation of the effect of temperature on CO2 corrosion of 1Cr carbon steel10.1016/j.corsci.2020.108471 ↗
53. D. cheng Kong, C. fang Dong, K. Xiao, X. gang Li, Effect of temperature on copper corrosion in high-level nuclear waste environment, Trans. Nonferrous Met. Soc. China (English Ed. 27 (2017) 1431–1438. https://doi.org/10.1016/S1003-6326(17)60165-1.10.1016/S1003-6326(17)60165-1 ↗
54. Z. Ahmad, Principles of corrosion engineering and corrosion control, in: 2007: pp. 57–119. https://doi.org/10.1016/B978-0-7506-5924-6.50004-0.10.1016/B978-075065924-6/50004-0 ↗
55. Effect of temperature on corrosion of metals by water10.1021/ie50512a020 ↗
56. On the theory of CO2 corrosion reactions - investigating their interrelation with the corrosion products and API X-100 steel microstructure10.1016/j.corsci.2014.04.055 ↗
57. Characterization, formation and development of scales on L80 steel tube resulting from seawater injection treatment10.1016/j.petrol.2020.107433 ↗
58. Role of alloyed copper on corrosion resistance of austenitic stainless steel in H2S-Cl- environment10.1016/j.corsci.2013.12.013 ↗
59. First stages of siderite crystallisation during CO2 corrosion of steel evaluated using in situ synchrotron small- and wide-angle X-ray scattering10.1039/C4FD00218K ↗
60. Corrosion of alloy steels containing 2% chromium in CO2 environments10.1016/j.corsci.2012.06.006 ↗
61. M. Di Bonaventura, B. Brown, M. Singer, S. Nesic, Effect of flow and steel microstructure on the formation of iron carbonate, in NACE - Int. Corros. Conf. (2018) Paper No. 11179.
62. Corrosion behavior of oil tube steel in simulant solution with hydrogen sulfide and carbon dioxide10.1016/j.matchemphys.2005.03.010 ↗