A comprehensive investigation of phase evolution of Al-Si coating during the prolonged aging at 650 °C
Source abstract
Abstract
Abstract Microstructural evolution of silicon-modified aluminide coating during 10,000 h aging at 650 °C was systematically investigated. Upon aging, the coating was gradually transformed from a multilayered structure to a double-layer structure, with the matrixes of Al-Fe-Si compounds and β-(Fe, Ni)Al in the two layers, respectively. An internal oxide layer formed below the coating, while the thickness of interdiffusion zone (IDZ) increased as the inward diffusion of Al. Precipitate evolutions in both the coating and the IDZ were discussed, which clarifies the microstructural origin of long-term stability of the coating. The phase evolution of Al-Si coating in prolonged aging was further discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. U.S. program on materials technology for ultra-supercritical coal power plants10.1361/10599490524039 ↗
2. Materials for ultrasupercritical coal power plants—boiler materials: part 110.1361/105994901770345394 ↗
3. Materials for ultrasupercritical coal power plants—turbine materials: part II10.1361/105994901770345402 ↗
4. High efficiency electric power generation: the environmental role10.1016/j.pecs.2006.08.002 ↗
5. Boiler materials for ultra-supercritical coal power plants—steamside oxidation10.1361/105994906X108756 ↗
6. Progress in coatings for gas turbine airfoils10.1016/S0257-8972(98)00667-7 ↗
7. Criteria for the formation of protective Al2O3 scales on Fe–Al and Fe–Cr–Al alloys10.1016/j.corsci.2005.01.012 ↗
8. Evaluation of iron-aluminide CVD coatings for high temperature corrosion protection10.1179/mht.2001.021 ↗
9. Improvement of high-temperature oxidation resistance and strength in alumina-forming austenitic stainless steels10.1016/j.matlet.2011.07.021 ↗
10. Chemical vapour deposition of coatings10.1016/S0079-6425(01)00009-3 ↗
11. Pack aluminisation of low alloy steels at temperatures below 700 °C10.1016/j.surfcoat.2003.10.046 ↗
12. Relationship between pack chemistry and aluminide coating formation for low-temperature aluminisation of alloy steels10.1016/j.actamat.2006.05.032 ↗
13. The role of combustion synthesis in the formation of slurry aluminization10.1016/j.intermet.2013.08.002 ↗
14. Oxidation of slurry aluminide coatings on cast stainless steel alloy CF8C-plus at 800 °C in water vapor10.1007/s11085-013-9378-y ↗
15. Designing oxidation-resistant coatings10.1007/s11837-000-0112-2 ↗
16. Fast heat treatment methods for al slurry diffusion coatings on alloy 800 prepared in air10.1016/j.surfcoat.2019.125140 ↗
17. The formation of aluminum oxide scales on high-temperature alloys10.1007/BF00666913 ↗
18. Influence of Al on scale formation and growth kinetics of 10wt.% Cr creep resistant ferritic steels at 650°C in air10.1016/j.corsci.2013.11.054 ↗
19. The morphology of coating/substrate interface in hot-dip-aluminized steels10.1016/j.msea.2007.03.013 ↗
20. Microstructure and cyclic oxidation behavior of silicide coating and Si–Al coating on Cr–50Nb alloy10.1016/j.corsci.2014.08.012 ↗
21. Microstructural evolution and growth of intermetallic compounds at the interface between solid cast Iron and liquid Al–Si alloy10.3390/met10060759 ↗
22. Steam oxidation resistance of slurry aluminum and aluminum/silicon coatings on steel for ultrasupercritical steam turbines10.1007/s11085-017-9726-4 ↗
23. A thermodynamic description of the Al–Fe–Si system over the whole composition and temperature ranges via a hybrid approach of CALPHAD and key experiments10.1016/j.intermet.2008.01.003 ↗
24. Observation of high-temperature phase transformation in the Si-modified aluminide coating on mild steel using EBSD10.1016/j.matchar.2010.02.001 ↗
25. Effect of silicon on the formation of intermetallic phases in aluminide coating on mild steel10.1016/j.intermet.2011.05.013 ↗
26. Analysis of coating layer formedon steel strips during aluminising by hot dipping in Al-Si baths10.1179/mst.1997.13.10.832 ↗
27. Effect of water vapour on morphology of the Si/Ti-rich phase at the interface between oxide layer and aluminide coating10.1016/j.corsci.2019.108240 ↗
28. Slurry coated Ni-plated Fe-base alloys: investigation of the influence of powder and substrate composition on interdiffusional and structural degradation of aluminides10.1016/j.surfcoat.2013.10.038 ↗
29. Interdiffusional degradation of oxidation-resistant aluminide coatings on Fe-base alloys10.1002/maco.200704057 ↗
30. Long-term degradation behavior of slurry aluminide coating on Super304H stainless steel at 650 °C10.1016/j.corsci.2020.109054 ↗
31. Overview of steam oxidation behaviour of Al protective oxide precursor coatings on P9210.1080/02670844.2016.1155691 ↗
32. Diffusion stable aluminide coatings: behaviour under steam and oxy-fuel fire-side conditions at 650 °C and accelerated diffusion tests at 900 °C10.1016/j.surfcoat.2018.07.027 ↗
33. Long-term performance of aluminide coatings on Fe-base alloys10.1016/j.surfcoat.2007.06.046 ↗
34. Preparation and characterization of slurry aluminide coating on Super304H boiler tube in combination with heat-treatment process10.1016/j.surfcoat.2019.04.061 ↗
35. Diffusion coatings of steels: Formation mechanism and microstructure of aluminized heat‐resistant stainless steels10.1116/1.582882 ↗
36. Observation of phase transformation and grain growth phenomena in aluminised Super 304H during steam oxidation10.1179/0960340914Z.000000000102 ↗
37. Assessment of the Fe–Ni–Al system10.1016/j.intermet.2005.11.021 ↗
38. First-principles investigation of the Ni–Fe–Al system10.1016/j.intermet.2005.02.009 ↗
39. Oxidation performance and degradation mechanism of the slurry aluminide coating deposited on Super304H in steam at 600–650 °C10.1016/j.surfcoat.2020.125700 ↗
40. Preparation and oxidation behaviour of nanocrystalline Ni+CrAlYSiN composite coating with AlN diffusion barrier on Ni-based superalloy K41710.1016/j.corsci.2012.03.027 ↗
41. Isothermal oxidation behavior and microstructure change of a gradient low-expansion coating for superalloys10.1016/j.corsci.2018.11.004 ↗
42. Sigma-phase in Fe-Cr and Fe-V alloy systems and its physical properties10.1080/10408436.2011.589232 ↗
43. Al2O3-forming austenitic stainless steels10.1126/science.1137711 ↗
44. Microstructural evolution of the interface between NiCrAlY coating and superalloy during isothermal oxidation10.1016/j.matdes.2015.05.014 ↗
45. On the compatibility of single crystal superalloys with a thermal barrier coating system10.1016/j.actamat.2007.07.057 ↗
46. Hot corrosion of a novel electrodeposited Ni–6Cr–7Al nanocomposite under molten (0.9Na,0.1K)2SO4 at 900°C10.1016/j.scriptamat.2007.01.035 ↗
47. The role of Si addition on the interfacial interaction in Fe-Al diffusion layer10.1016/0956-716X(94)90471-5 ↗
48. On the influence of silicon on the growth of the alloy layer during hot dip aluminizing10.1007/BF00553379 ↗
49. Effect of silicon on the microstructure and growth kinetics of intermetallic phases formed during hot-dip aluminizing of ferritic steel10.1016/j.surfcoat.2017.03.040 ↗
50. Wear and corrosion behavior of laser clad Cr3Si reinforced intermetallic composite coatings10.1016/S0966-9795(03)00078-5 ↗
51. An evaluation of the properties of Cr3Si alloyed with Mo10.1016/0921-5093(95)09767-8 ↗
52. Evaluation of methods to produce tough Cr3Si based composites10.1016/S0921-5093(97)00611-4 ↗
53. Spontaneous reaction formation of Cr23C6 diffusion barrier layer between nanocrystalline MCrAlY coating and Ni-base superalloy at high temperature10.1016/j.corsci.2015.07.008 ↗
54. High temperature corrosion behaviour of a gradient NiCoCrAlYSi coating I: microstructure evolution10.1016/j.corsci.2010.01.025 ↗
55. Effect of chromium on the formation of intermetallic phases in hot-dipped aluminide Cr–Mo steels10.1016/j.apsusc.2013.04.015 ↗
56. Performance of a silicon-modified aluminide coating in high temperature hot corrosion test conditions10.1016/0257-8972(94)90134-1 ↗
57. Laboratory and field corrosion behavior of coatings for turbine blades10.1016/S0257-8972(97)00481-7 ↗
58. Preparation and hot corrosion behaviour of a MCrAlY+AlSiY composite coating10.1016/j.corsci.2008.08.018 ↗