Effect of silicon on the kinetics and mechanisms of cyclic oxidation of titanium aluminide (Ti45Al5Nb0.5Si) developed by laser direct energy deposition
Source abstract
Abstract
In this study, titanium aluminides comprising of Ti45Al5Nb0.5Si (TiAl-1), Ti45Al5Nb5Si (TiAl-2) and Ti45Al5Nb10Si (TiAl-3) were developed through laser direct energy deposition (LDED) with Nd-YAG laser under optimized process parameters. The microstructure of TiAl-1 consists of α 2 +γ phase mixtures. Addition of 5 wt% and 10 wt% Si results in the formation of silicides in addition to γ and α 2 phases. A thorough kinetics of cyclic oxidation (from 700°C to 900°C in air) demonstrates that with an increase in Si concentration the activation energy of oxidation increases from 227.99 kJ/mol (TiAl-1) to 337.55 kJ/mol (TiAl-3). The mechanism of oxidation has been established.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metallurgical and Alloy Processes · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Alloy design for aircraft engines10.1038/nmat4709 ↗
2. Polysynthetic twinned TiAl single crystals for high-temperature applications10.1038/nmat4677 ↗
3. Oxidation behavior of gamma alloys designed for high temperature applications10.1016/j.intermet.2004.12.007 ↗
4. Isothermal oxidation behavior of powder metallurgy beta gamma TiAl-2Nb-2Mo alloy10.1016/j.intermet.2011.05.027 ↗
5. Effect of Nb on oxidation behavior of high Nb containing TiAl alloys10.1016/j.intermet.2010.08.029 ↗
6. Effect of Nb on the high temperature oxidation of Ti–(0–50 at%)Al10.1016/S1359-6462(02)00042-8 ↗
7. The oxidation behavior of several Ti-Al alloys at 900°c in air10.1023/A:1018839511102 ↗
8. Effects of Nb and Si on high temperature oxidation of TiAl10.1016/S1003-6326(08)60090-4 ↗
9. Influence of Y addition on the long time oxidation behaviors of high Nb containing TiAl alloys at 900°C10.1016/j.intermet.2010.04.012 ↗
10. Microstructure and properties of Ti-Al coating and Ti-Al-Si system coatings on Ti-6Al-4V fabricated by laser surface alloying10.1016/j.surfcoat.2016.10.082 ↗
11. High-temperature behavior of Ti–Al–Si alloys produced by reactive sintering10.1016/j.jallcom.2010.05.115 ↗
12. The high-temperature oxidation behavior of Ti-47Al-2Cr-0.2Si and Ti-48Al-2Cr-2Nb compared with Ti-48Al-2Cr10.1016/S0966-9795(97)00025-3 ↗
13. Laser surface alloying of Ti with Si, Al and Si+Al for an improved oxidation resistance10.1016/S0921-5093(99)00045-3 ↗
14. Microstructure and high temperature oxidation behavior of Ti-Al-Nb-Si coatings on Ti-6Al-4V alloy10.1016/j.jallcom.2018.06.238 ↗
15. High-temperature oxidation behavior of laser-surface-alloyed Ti with Si and Si + Al10.1023/A:1015300405051 ↗
16. Review of alloy and process development of TiAl alloys10.1016/j.intermet.2005.10.019 ↗
17. Intermetallics: why is it so difficult to introduce them in gas turbine engines?10.1016/j.intermet.2006.01.064 ↗
18. 3-D Printing by laser-assisted direct energy deposition (LAM): the present status10.1007/s41403-021-00252-9 ↗
19. Laser material processing10.1179/1743280411Y.0000000003 ↗
20. Direct laser cladding of the silicide dispersed titanium aluminide (Ti45Al5Nb0.5Si) composites10.1016/j.optlastec.2018.03.012 ↗
21. Studies on the effect of composition and pre-heating on microstructure and mechanical properties of direct laser clad titanium aluminide
22. Effect of simultaneous heating on oxidation behavior of niobium added titanium aluminide (Ti-45Al-5Nb-0.5Si) developed by laser direct energy deposition (LDED)10.1016/j.matchemphys.2023.128531 ↗
23. Quantitative interpretation of X-ray diffraction patterns of mixtures. i. matrix-flushing method for quantitative multicomponent analysis10.1107/S0021889874010375 ↗
24. M.G. Fontana, N.D. Greene, Corrosion engineering, McGraw-Hill International Edn, NY, 1967.
25. P.W. Atkin, Physical Chemistry, O.U.P., Oxford, UK, 1986.
26. Some aspects of the high-temperature behavior of an in situ Ti-Ti5Si3 eutectic composite
27. High temperature oxidation of titanium–silicon alloys10.1016/S0921-5093(03)00564-1 ↗
28. Structure and oxidation behavior of γ-TiAl coating produced by laser cladding on titanium alloy10.1016/j.surfcoat.2017.04.008 ↗
29. Oxidation of two-phase (TiAl+Ti3Al) alloy10.1016/S0036-9748(88)80006-1 ↗
30. Influence of Y-addition on the oxidation behavior of Al-rich γ-TiAl alloys10.1016/j.intermet.2004.01.008 ↗
31. Microstructure and super oxidation resistance of the network structured Ti-Al-Si coating10.1016/j.jallcom.2019.151679 ↗
32. A short review on the phase structures, oxidation kinetics, and mechanical properties of complex Ti-Al alloys10.3390/ma14071677 ↗
33. Effect of Ti-Al-Cr coatings on the high temperature oxidation behavior of TiAl alloys10.1016/S0921-5093(00)01956-0 ↗
34. High temperature oxidation behavior of TiAl8Nb alloy10.2478/amm-2013-0021 ↗
35. The effect of microstructure on the oxidation behavior of TiAl-based intermetallic10.1016/0010-938X(93)90276-M ↗
36. Effect of niobium on the structure and high-temperature oxidation of TiAl–Ti5Si3 eutectic alloy10.1016/j.intermet.2008.04.005 ↗
37. Fabrication and oxidation resistance of TiAl matrix coatings reinforced with silicide precipitates produced by heat treatment of warm sprayed coatings10.1007/s11666-018-0751-x ↗
38. Kubaschewski · 1967
39. Oxidation behavior of Ti-46.7Al–1.9W–0.5Si in air and Ar–20%O2 between 750 and 950ºC10.1016/j.corsci.2004.08.014 ↗
40. Thermodynamic aspects of TiAl and TiSi2 oxidation: The Al-Ti-O and Si-Ti-O Phase diagrams10.1007/BF00666500 ↗
41. Gale · 2008