Microstructurally and mechanically small fatigue crack growth behaviors of 316LN stainless steel in high-temperature pressurized water
Source abstract
Abstract
Corrosion fatigue behaviors at different stages of microstructurally small crack (MSC) and mechanically small crack (MeSC) for 316LN stainless steel were investigated in high-temperature pressurized water by interrupted tests. An improved model about the proportion in total fatigue life and growth rate for the MSC and MeSC has been proposed. It is found that the proportion in total fatigue life for the MSC is lower and the crack growth rate is higher at a lower strain rate due to the high plastic deformation and dislocation density at grain boundary. Mechanism of crack growth in high-temperature pressurized water is discussed.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. O.K. Chopra, G.L. Stevens, Effect of LWR coolant environments on the fatigue life of reactor materials, NUREG/CR-6909 Rev 1 (2018).
2. Corrosion fatigue initiation and short crack growth behaviour of austenitic stainless steels under light water reactor conditions10.1016/j.corsci.2012.02.008 ↗
3. Development of an environmental fatigue evaluation method for nuclear power plants in JSME code
4. O.K. Chopra, W.J. Shack, Environmental effects on fatigue crack initiation in piping and pressure vessel steels, NUREG/CR-6717, ANL-00/27, Argonne National Laboratory (2001).
5. Stress corrosion, cracking testing guidelines: with emphasis on high temperature water. EPRI, Palo Alto
6. Corrosion and stress corrosion cracking of austenitic stainless steels10.1016/B978-0-08-102865-0.00108-4 ↗
7. Fatigue crack nucleation and microstructurally small crack growth mechanisms in high strength aluminum alloys10.1016/j.ijfatigue.2020.105790 ↗
8. Three-dimensional high-resolution crystallographic observation of the entire volume of microstructurally small fatigue cracks in Ni-Co based superalloy10.1016/j.scriptamat.2022.115026 ↗
9. Microstructurally small fatigue crack initiation behavior of fine and coarse grain simulated heat-affected zone microstructures in low carbon steel10.1016/j.msea.2021.142363 ↗
10. Modeling and simulation of microstructurally small crack formation and growth in notched nickel-base superalloy component10.1016/j.jmst.2013.09.011 ↗
11. Resistance to mechanically small fatigue crack growth in ultrafine grained interstitial-free steel fabricated by accumulative roll-bonding10.1016/j.ijfatigue.2018.09.002 ↗
12. Direct observations and characterization of crack closure during microstructurally small fatigue crack growth via in-situ high-energy X-ray characterization10.1016/j.actamat.2020.116564 ↗
13. Effect of grain boundary engineering on corrosion fatigue behavior of 316LN stainless steel in borated and lithiated high-temperature water10.1016/j.corsci.2019.01.036 ↗
14. E.U. Lee, Corrosion fatigue and stress corrosion cracking of 7475-T7351 aluminum alloy, in: Proceedings of International Conference and Exposition on Fatigue Corrosion Cracking, Fracture Mechanics and Failure Analysis, 1985, pp. 123–128.
15. R.I. Stephens, Comparison of fatigue resistance of cast steels under different test conditions, in: International Conference and Exposition on Fatigue, Corrosion Cracking, Fracture Mechanics and Failure Analysis, 1985, pp. 69–78.
16. Corrosion fatigue and microstructural characterisation of Type 316 austenitic stainless steels tested in PWR primary water10.1016/j.corsci.2017.10.022 ↗
17. Technical Note: Corrosion fatigue crack growth of forged Type 316NG austenitic stainless steel in 325°C water10.5006/2647 ↗
18. Environmental fatigue crack propagation behavior of cast stainless steels under PWR condition10.4028/www.scientific.net/KEM.297-300.968 ↗
19. Environmental fatigue crack growth rate of Type 347 austenitic stainless steel in simulated PWR water conditions10.1016/j.ijpvp.2018.10.003 ↗
20. In-situ observation of microstructurally small fatigue crack initiation and growth behaviors of additively-manufactured alloy 71810.1016/j.msea.2022.142682 ↗
21. In-situ investigations of hydrogen influenced crack initiation and propagation under tensile and low cycle fatigue loadings in RPV steel10.1016/j.jnucmat.2019.151912 ↗
22. In-situ SEM study of fatigue micro-crack initiation and propagation behavior in pre-corroded AA7075-T765110.1016/j.ijfatigue.2020.105655 ↗
23. Grain boundary effects on cyclic deformation and fatigue damage10.1016/j.pmatsci.2008.06.001 ↗
24. S. Suresh, Fatigue of materials, 1990.
25. Effects of dissolved hydrogen on low-cycle fatigue behaviors and hydrogen uptake of 316LN austenitic stainless steel in simulated pressurized water reactor primary water10.1016/j.ijfatigue.2019.105457 ↗
26. Effects of heat treatment on corrosion fatigue and stress corrosion crack growth of additive-manufactured Alloy 800H in high-temperature water10.1016/j.corsci.2021.109739 ↗
27. Effect of surface roughness on low-cycle fatigue behaviors of 316LN stainless steel in borated and lithiated high-temperature pressurized water10.1016/j.corsci.2022.110792 ↗
28. Synergistic effect of mechanical and environmental damages of 316LN stainless steel under different fatigue strain amplitudes in high-temperature pressurized water10.1016/j.msea.2018.11.081 ↗
29. Corrosion fatigue behavior and crack-tip characteristic of 316LN stainless steel in high-temperature pressurized water10.1016/j.jnucmat.2019.02.040 ↗
30. Environmentally assisted fatigue behavior of 308L weld metal in borated and lithiated high-temperature water10.1016/j.jnucmat.2020.152365 ↗
31. Influence of cyclic strain rate on environmentally assisted cracking behavior of pressure vessel steel in high-temperature water10.1016/j.msea.2004.02.051 ↗
32. Effects of strain rate on low-cycle fatigue crack growth behavior of 316LN weld metal in high-temperature pressurized water10.1016/j.corsci.2022.110169 ↗
33. Standard test method for strain-controlled fatigue testing, in, ASTM International, 2012, pp. 16.
34. Low-cycle fatigue behaviors of 316L austenitic stainless steels with different surface finishing in simulated pressurized water reactor primary water and an oxygenated, borated, lithiated high temperature water10.1016/j.corsci.2021.109709 ↗
35. Effects of micro-scale corrosion damage features and local microstructure on fatigue crack initiation location10.1016/j.ijfatigue.2021.106301 ↗
36. Investigations on the SCC initiation behavior of cold worked 316 L in high temperature oxygenated water at constant loads10.1016/j.corsci.2022.110336 ↗
37. J. Tan, X. Wang, X. Wu, E.-H. Han, Corrosion fatigue vehavior of 316LN stainless steel hollow specimen in high-temperature pressurized water, Acta Metall Sin (2021).
38. Influence of crack length and grain boundaries on the propagation rate of short cracks in austenitic stainless steel10.1016/j.scriptamat.2012.07.007 ↗
39. Influence of mechanical surface treatments on oxide properties formed on 304L stainless steel in simulated BWR and PWR primary water10.1016/j.jnucmat.2021.153258 ↗
40. Effects of surface treatments and temperature on the oxidation behavior of 308L stainless steel cladding in hydrogenated high-temperature water10.1016/j.jnucmat.2022.153741 ↗
41. Cyclic deformation, crack initiation, and low-cycle Fatigue10.1016/B978-0-12-822944-6.00077-3 ↗
42. Assessment of microstructure- and inclusion-induced fatigue crack initiation in bainitic/martensitic rail steels: Competing and synergistic effects10.1016/j.ijfatigue.2023.107706 ↗
43. Effect of different loading conditions on corrosion fatigue crack growth rate of a nickel-based alloy in supercritical water10.1016/j.ijfatigue.2023.107815 ↗
44. Corrosion fatigue damage mechanism and life evaluation of Inconel Alloy 690TT steam generator tube in high temperature pressurized water10.1016/j.corsci.2022.110953 ↗
45. Microstructural evolution and oxidation behaviour of CF8A austenitic stainless steel during corrosion fatigue in a simulated pressurised water reactor environment10.1016/j.corsci.2019.108286 ↗