High-temperature resistance and self-lubricating TiAlTaCN nanocomposite hard coating by synergistic interaction of TiAlN(C) and TaN(C) phases
Source abstract
Abstract
The self-lubricating TiAlTaCN coating with high-temperature resistance above 800 °C is developed using magnetron sputtering. This mechanism stems from the TaN phase is easily oxidized to form a protective Ta 2O 5 that compensates for the insufficient antioxidant capacity of Al 2O 3. Moreover, the TaC phase, being resistant to oxidation, contributes to achieving the self-lubrication effect with amorphous C-related phases. The cutting distance of the TiAlTaCN is 250% greater than that of the TiAlCN during the high-speed cutting of titanium alloy. These results reveal the oxidation mechanism of different carbon nitrides and provide a new solution for the self-lubricating coatings applied at high temperatures.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. A review of tribological properties and deposition methods for selected hard protective coatings10.1016/j.triboint.2022.107919 ↗
2. Study of the oxidation mechanism at high temperature of nanofiber textured AlTiCrN coatings produced by physical vapor deposition using high-resolution characterization techniques10.1016/j.corsci.2022.110226 ↗
3. Evaluation of wear mechanisms of PVD and CVD coatings deposited on cemented carbide substrates applied to hard turning10.1007/s00170-020-05000-x ↗
4. Impact of oxygen content on the thermal stability of Ti-Al-O-N coatings based on computational and experimental studies10.1016/j.actamat.2022.117706 ↗
5. Microstructure of TiAlN and CrAlN coatings and cutting performance of coated silicon nitride inserts in cast iron turning10.1016/j.ceramint.2014.02.083 ↗
6. Physical vapor deposition technology for coated cutting tools: a review10.1016/j.ceramint.2020.04.168 ↗
7. Thermal stability of macroparticles in Ti0.27Al0.21N0.52 coatings10.1016/j.apsusc.2021.149527 ↗
8. Multilayer-growth of TiAlN/WS self-lubricating composite coatings with high adhesion and their cutting performance on titanium alloy10.1016/j.compositesb.2021.108620 ↗
9. Comparative study of surface roughness and tribological behavior during running-in period of hard coatings deposited by lateral rotating cathode arc10.1016/j.wear.2009.11.016 ↗
10. Improvement of machinability of Ti and its alloys using cooling-lubrication techniques: a review and future prospect10.1016/j.jmrt.2021.01.031 ↗
11. Environmental friendly cutting fluids and cooling techniques in machining: a review10.1016/j.jclepro.2014.07.071 ↗
12. Hard coatings for cutting applications: Physical vs. chemical vapor deposition and future challenges for the coatings community10.1016/j.surfcoat.2021.127949 ↗
13. A critical review on self-lubricating ceramic-composite cutting tools10.1016/j.ceramint.2021.04.094 ↗
14. High temperature solid-lubricating materials: a review10.1016/j.triboint.2018.12.037 ↗
15. Tribological behaviour of self-lubricating materials at high temperatures10.1080/09506608.2017.1410944 ↗
16. High temperature tribological behaviour of TiSiN(Ag) films deposited by HiPIMS in DOMS mode10.1016/j.surfcoat.2020.126176 ↗
17. Tribology of two-dimensional materials: From mechanisms to modulating strategies10.1016/j.mattod.2018.12.002 ↗
18. Vanadium containing self-adaptive low-friction hard coatings for high-temperature applications: a review10.1016/j.surfcoat.2013.04.034 ↗
19. Influence of lubricious oxides formation on the tribological behavior of Mo-V-Cu-N coatings deposited by HIPIMS10.1016/j.surfcoat.2018.12.033 ↗
20. Performance of CrCN-WS2 hard/soft composite coated tools in dry cutting of titanium alloys10.1016/j.jmapro.2020.03.014 ↗
21. Controllable high adhesion and low friction coefficient in TiAlCN coatings by tuning the C/N ratio10.1016/j.apsusc.2022.153542 ↗
22. Tribological properties and thermal stability of TiAlCN coatings deposited by ICP-assisted sputtering10.1016/j.surfcoat.2013.04.041 ↗
23. Effect of stress loading on hot salt corrosion behavior of TiAlTaN/CrAlN multilayer coatings, Corrosion Sci
24. Addition of Ta and Y in a hard Ti-Al-N PVD coating: Individual and conjugated effect on the oxidation and wear properties10.1016/j.corsci.2019.04.042 ↗
25. Increased thermal stability of Ti-Al-N thin films by Ta alloying10.1016/j.surfcoat.2011.07.009 ↗
26. Origin of high temperature oxidation resistance of Ti-Al-Ta-N coatings10.1016/j.surfcoat.2014.02.067 ↗
27. Influence of crystallite morphology on the ablative behaviors of CVD-TaC coatings prepared on C/C composites beyond 2100 °C10.1016/j.corsci.2022.110426 ↗
28. Design and preparation of multilayer TaC/HfC coating: Ablation behavior under oxyacetylene flame with different heat flux10.1016/j.corsci.2022.110385 ↗
29. Effect of texture on wear resistance of tantalum nitride film10.1016/j.triboint.2019.01.001 ↗
30. Structure, mechanical and tribological properties, and oxidation resistance of TaC/a-C:H films deposited by high power impulse magnetron sputtering10.1016/j.ceramint.2020.06.284 ↗
31. Influence of nitrogen partial pressure on structure, mechanical and tribological properties of TaCN coatings10.1016/j.ceramint.2021.06.031 ↗
32. Insight into high temperature performance of magnetron sputtered Si-Ta-C-(N) coatings with an ion-implanted interlayer10.1016/j.apsusc.2020.148526 ↗
33. Tribochemistry of TaN, TiAlN and TaAlN coatings under ambient atmosphere and high-vacuum sliding conditions10.1016/j.apsusc.2019.143989 ↗
34. Surface characterisation of plasma-nitrided titanium: an XPS study10.1016/0169-4332(94)00545-1 ↗
35. Adhesion enhancement of titanium nitride coating on aluminum casting alloy by intrinsic microstructures10.1016/j.apsusc.2016.03.117 ↗
36. Study of the structure, properties, scratch resistance and deformation behaviour of graded Cr-CrN-Cr(1-x)AlxN coatings10.1016/j.ceramint.2018.03.187 ↗
37. Effect of nitrogen pressure on the microstructure, mechanical and electrochemical properties of CrAlN coatings deposited by filter cathode vacuum arc10.1016/j.ceramint.2022.08.216 ↗
38. Impact of the B/C-doping ratio on the microstructure, mechanical properties, and cutting performance of AlTiN-based coatings10.1016/j.ceramint.2022.09.259 ↗
39. Influence of high temperature annealing on the structure, hardness and tribological properties of diamond-like carbon and TiAlSiCN nanocomposite coatings10.1016/j.apsusc.2011.09.072 ↗
40. Understanding the wear failure mechanism of TiAlSiCN nanocomposite coating at evaluated temperatures10.1016/j.triboint.2020.106716 ↗
41. High-temperature thermal stability and oxidation resistance of Cr and Ta co-alloyed Ti−Al−N coatings deposited by cathodic arc evaporation10.1016/j.corsci.2020.108490 ↗
42. Effect of Al2O3 content on the high-temperature oxidation behaviour of CoCrAlYTa coatings produced by laser-induction hybrid cladding10.1016/j.corsci.2022.110739 ↗
43. Effect of thickness scaling on the permeability and thermal stability of Ta(N) diffusion barrier10.1016/j.apsusc.2019.04.101 ↗
44. Interfacial reactions during sputter deposition of Ta and TaN films on organosilicate glass: XPS and TEM results10.1016/j.apsusc.2007.01.020 ↗
45. Tantalum nitride electron-selective contact for crystalline silicon solar cells10.1002/aenm.201800608 ↗
46. Study of dry and electrogenerated Ta2O5 and Ta/Ta2O5/Pt structures by XPS10.1016/S0921-5107(98)00177-9 ↗
47. Effect of deposition and annealing temperature on mechanical properties of TaN film10.1016/j.apsusc.2011.08.116 ↗
48. Niobium- and tantalum-containing oxide materials: Synthesis, properties, and application10.1134/S002016851213002X ↗
49. Influence of oxygen addition on the oxidation resistance of TiAlN10.1016/j.scriptamat.2022.115148 ↗
50. Thermal stability and oxidation resistance of sputtered Ti-Al-Cr-N hard coatings10.1016/j.surfcoat.2017.05.053 ↗
51. Guidelines for increasing the oxidation resistance of Ti-Al-N based coatings10.1016/j.tsf.2019.05.009 ↗
52. VCH Verlagsgesellschaft, Weinheim
53. Thermal stability and oxidation resistance of Ti-Al-N coatings10.1016/j.surfcoat.2011.12.028 ↗
54. P. Hancock, R.C. Hurst, The Mechanical Properties and Breakdown of Surface Oxide Films at Elevated Temperatures, Adv. Corros. Sci. Technol. Springer, Boston, MA, 1974.10.1007/978-1-4615-9059-0_1 ↗
55. Oxidation of metastable single-phase mechanisms Ti0.5Al0.5N films: kinetics and mechanisms10.1063/1.345664 ↗
56. Oxidation behavior of titanium carbonitride coating deposited by atmospheric plasma spray synthesis10.1007/s11666-017-0620-z ↗
57. Wear behaviour of PVD coated and cryogenically treated tools for Ti-6Al-4V turning10.1007/s12289-014-1215-6 ↗
58. Nanostructured cutting tools coatings for machining titanium10.1080/10910340802067239 ↗