Interaction between silty sand and temperature towards corrosion behavior of carbon steel in CO2 environment
Source abstract
Abstract
The interaction between silty sand and temperature towards corrosion of carbon steel in CO 2 environment is investigated. The effect of silty sand is more complicated, while the effect of temperature is more remarkable. High temperature causes a more protective corrosion products layer. Silty sand physically adsorbs on the surface and embeds in the porous Fe 3C layer at 40 ℃ to slightly reduce corrosion. At 80 ℃, silty sand delays FeCO 3 precipitation and significantly increases the porosity of corrosion products layer, thus promoting corrosion. At 120 ℃, silty sand increases the porosity and hinders the formation of Fe 3O 4 to accelerate corrosion.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · High-Temperature Coating Behaviors · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Experimental study of sand production and permeability enhancement of unconsolidated rocks under different stress conditions10.1016/j.petrol.2019.106238 ↗
2. Effects of proppant wettability and size on transport and retention of coal fines in saturated proppant packs: experimental and theoretical studies10.1021/acs.energyfuels.1c01418 ↗
3. Sand production of the shale gas well in different production periods: structure and component10.3390/en14175588 ↗
4. Microcosmic retaining mechanism and behavior of screen media with highly argillaceous fine sand from natural gas hydrate reservoir10.1016/j.jngse.2020.103618 ↗
5. Sand production due to chemical-rock interaction. A review10.1016/j.engfailanal.2022.106745 ↗
6. A comprehensive review of solid particle erosion modelling for oil and gas wells and pipelines applications10.1016/j.jngse.2014.10.001 ↗
7. Effects of pre-filmed FeCO3 on flow-induced corrosion and erosion-corrosion in the absence and presence of corrosion inhibitor at 60 ℃
8. Case study on erosion-corrosion degradation of pipework located on an offshore oil and gas facility10.1016/j.wear.2011.01.036 ↗
9. A new integrated method for comprehensive performance of mechanical sand control screens testing and evaluation10.1016/j.petrol.2017.08.043 ↗
10. Organosilane film for sand migration control based on in-situ hydrolysis and polycondensation effects10.1016/j.petrol.2017.08.013 ↗
11. Effect of silty sand in formation water on CO2 corrosion behavior of carbon steel10.1016/j.apsusc.2016.01.228 ↗
12. Effect of silty sand on the pre-passivation behaviour of 1Cr steel in a CO2 aqueous environment10.1080/1478422X.2020.1713533 ↗
13. Interaction of silty sand and preformed corrosion products on N80 carbon steel in CO2 environment10.1016/j.corsci.2022.110467 ↗
14. Dynamic mechanism of corrosion products formed on carbon steel in CO2 environment: Effect of silty sand10.1016/j.corsci.2023.111355 ↗
15. Modeling and experimental study on the effects of temperature on the corrosion of API carbon steel in CO2-Saturated environment
16. Effect of extremely aggressive environment on the nature of corrosion scales of HP-13Cr stainless steel10.1016/j.apsusc.2018.10.237 ↗
17. An electrochemical and X-ray computed tomography investigation of the effect of temperature on CO2 corrosion of 1Cr carbon steel10.1016/j.corsci.2020.108471 ↗
18. The formation of FeCO3 and Fe3O4 on carbon steel and their protective capabilities against CO2 corrosion at elevated temperature and pressure10.1016/j.corsci.2019.06.016 ↗
19. Effects of temperature on the corrosion behaviour of X70 steel in CO2-Containing formation water10.1016/j.jngse.2021.103815 ↗
20. Modeling of uniform CO2 corrosion of mild steel in gas transportation systems: a review10.1016/j.jngse.2015.12.052 ↗
21. Effect of FeCO3 supersaturation and carbide exposure on the CO2 corrosion rate of carbon steel10.5006/0553 ↗
22. Effect of temperature on CO2 corrosion of carbon steel10.1002/sia.3057 ↗
23. Chemistry and structure of the passive film on mild steel in CO2 corrosion environments10.1021/ie801819y ↗
24. Construction and Verification of Pourbaix Diagrams for CO2 Corrosion of Mild Steel Valid up to 250 ℃
25. Electrochemical behaviour of N80 steel in CO2 environment at high temperature and pressure conditions10.1016/j.corsci.2021.109619 ↗
26. Potential-pH diagrams for iron in supercritical water10.5006/1.3290292 ↗
27. Electrochemical response of micro-alloyed steel under potentiostatic polarization in CO2 saturated brine10.1016/j.corsci.2018.04.001 ↗
28. Electrochemical investigation into the dynamic mechanism of CO2 corrosion product film formation on the carbon steel under the water-condensation condition10.1016/j.electacta.2021.138880 ↗
29. Evolution of dissolution processes at the interface of carbon steel corroding in a CO2 environment studied by EIS10.1016/j.corsci.2009.10.007 ↗
30. Technical note: concerning the conversion of the constant phase element parameter Y0 into a capacitance10.5006/1.3280607 ↗
31. The analysis of electrode impedances complicated by the presence of a constant phase element10.1016/S0022-0728(84)80324-1 ↗
32. Effect of microstructure of low-alloy steel on corrosion propagation in a simulated CO2 environment10.1149/1945-7111/aca127 ↗
33. Electrochemical and molecular modelling studies of CO2 corrosion inhibition characteristics of alkanolamine molecules for the protection of 1Cr steel10.1016/j.corsci.2021.109999 ↗
34. Understanding the general and localized corrosion mechanisms of Cr-containing steels in supercritical CO2-saturated aqueous environments10.1016/j.jallcom.2019.04.055 ↗
35. A review of iron carbonate (FeCO3) formation in the oil and gas industry10.1016/j.corsci.2018.07.021 ↗
36. The growth mechanism of CO2 corrosion product films10.1016/j.corsci.2010.09.060 ↗
37. A study by electrochemical impedance spectroscopy and surface analysis of corrosion product layers formed during CO2 corrosion of low alloy steel10.1016/j.corsci.2020.108666 ↗
38. Galvanic effects induced by siderite and cementite surface layers on carbon steel in aqueous CO2 environments10.1016/j.corsci.2022.110762 ↗
39. Understanding localized CO2 corrosion of carbon steel from physical properties of iron carbonate scales
40. Chemistry and structure of the passive film on mild steel in CO2 corrosion environments10.1021/ie801819y ↗
41. Mesh-capped probe design for direct pH measurements at an actively corroding metal surface10.1007/s10800-009-0043-8 ↗
42. Performance evaluation of an imidazoline corrosion inhibitor in a CO2 saturated environment with emphasis on localised corrosion10.1016/j.corsci.2020.108916 ↗
43. Temporal evolution of sweet oilfield corrosion scale: phases, morphologies, habits, and protection10.1016/j.corsci.2018.07.009 ↗