Effect of the microstructure of Haynes 282 nickel-based superalloys on oxidation behavior under oxy-fuel combustion conditions
Source abstract
Abstract
The effect of the Haynes 282 microstructure on its oxidation behavior was investigated using X-ray diffraction, scanning electron microscopy, electron backscatter diffraction, transmission Kikuchi diffraction, and transmission electron microscopy. Specimens with different grain sizes were oxidized at 760 °C in O2 + 100 ppm SO2 to simulate oxy-fuel combustion conditions. Small-grained, deformed specimens showed a high oxidation rate at the initial stage. However, the small-grained specimen exhibited superior oxidation resistance at the later stage of oxidation, with Cr depletion being suppressed only in this specimen. These different oxidation behaviors are discussed in terms of Cr and Ti supplied from the matrix.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Wheeldon · 2008
2. Research and development of heat-resistant materials for advanced USC power plants with steam temperatures of 700C and above10.15302/J-ENG-2015031 ↗
3. Microstructural evolution and compressive deformation of a new Ni–Fe base superalloy after long term thermal exposure at 700 °C10.1016/j.msea.2014.09.095 ↗
4. Creep strength of dissimilar welded joints using high B-9Cr steel for advanced USC boiler10.1007/s11661-014-2471-2 ↗
5. Development of boiler tubes and pipes for advanced USC power plants
6. P.S. Weitzel, Steam generator for advanced ultra supercritical power plants 700C to 760C. In: ASME 2011 Power Conference collocated with JSME ICOPE 2011, American Society of Mechanical Engineers, 2011, pp. 281–291.10.1115/POWER2011-55039 ↗
7. M. Igarashi, H. Semba, M. Yonemura, T. Hamaguchi,H. Okada, M. Yoshizawa, A. Iseda, Advanced in materials technology for A-USCpower plant boilers. In: Igarashi, H. Semba, M. Yonemura, T. Hamaguchi, H. Okada, M. Yoshizawa, A. Iseda, Advances in Materials Technology for Fossil Power Plants: Proceedings from the 6th International Conference. Santa Fe, USA, 2011, pp. 72–85.10.31399/asm.cp.am-epri-2010p0072 ↗
8. Phenomenological and microstructural analysis of intermediate temperatures creep in a Ni–Fe-based alloy for advanced ultra-supercritical fossil power plants10.1016/j.actamat.2015.09.006 ↗
9. Influence of heat treatment on the microstructure and tensile properties of Ni-base superalloy Haynes 28210.1016/j.msea.2016.10.048 ↗
10. Processing of advanced cast alloys for A-USC steam turbine applications10.1007/s11837-012-0241-4 ↗
11. Development of strong, oxidation and corrosion resistant nickel-based superalloys: critical review of challenges, progress and prospects10.1080/09506608.2018.1516713 ↗
12. Oxidation behaviour of cast Ni–Cr alloys in steam at 800° C10.1179/1743284712Y.0000000103 ↗
13. Oxidation kinetics of some nickel‐based superalloy foils and electronic resistance of the oxide scale formed in air part I10.1149/1.1392454 ↗
14. Oxidation behavior of several chromia-forming commercial nickel-base superalloys10.1007/BF02134783 ↗
15. High temperature oxidation of newly developed alloy 282 in the flowing-air and steam condition at 900–1100 °C10.1007/s11085-015-9555-2 ↗
16. High temperature oxidation of the Haynes 282© nickel-based superalloy10.1007/s11085-014-9483-6 ↗
17. Fireside corrosion of applied and modern superheater-alloys under oxy-fuel conditions10.1016/j.egypro.2013.06.020 ↗
18. Subsurface characterization of an oxidation-induced phase transformation and twinning in nickel-based superalloy exposed to oxy-combustion environments10.1016/j.msea.2012.04.066 ↗
19. High-temperature-oxidation-induced ordered structure in Inconel 939 superalloy exposed to oxy-combustion environments10.1016/j.msea.2012.12.074 ↗
20. Effect of gamma prime depletion on creep behaviour of a nickel base superalloy (Inconel alloy X-750)10.1007/BF02744633 ↗
21. Effect of high-temperature hot corrosion on the low cycle fatigue behavior of a directionally solidified nickel-base superalloy10.1016/j.ijfatigue.2014.08.011 ↗
22. Hot corrosion of Ni□ Cr alloys in SO2+ O2 atmospheres—I. Corrosion kinetics10.1016/0010-938X(76)90113-X ↗
23. Grain-size effects on the high-temperature oxidation of modified 304 austenitic stainless steel10.1007/s11085-012-9347-x ↗
24. The role of grain boundaries in the initial oxidation behavior of austenitic stainless steel containing alloyed Cu at 700°C for advanced thermal power plant applications10.1016/j.corsci.2015.03.014 ↗
25. Grain-size effects on the high-temperature oxidation behaviour of chromium steels10.1007/s11085-010-9192-8 ↗
26. Effect of environmental sulfur on the structure of alumina scales formed on Ni-base alloys10.1016/j.actamat.2015.06.031 ↗
27. Fireside corrosion behaviors of Super304H and HR3C in coal ash/gas environment with different SO 2 contents at 650 °C10.1007/s11665-017-3051-6 ↗
28. Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing10.1016/S1359-6462(02)00282-8 ↗
29. Deformation mechanism and texture and microstructure evolution during high-speed rolling of AZ31B Mg sheets10.1007/s10853-008-3021-3 ↗
30. Kernel average misorientation confidence index correlation from FIB sliced Ni-Fe-Cr alloy surface10.1017/S1431927611002996 ↗
31. Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD10.1016/j.msea.2010.01.004 ↗
32. Quantification of bake hardening effect in DP600 and TRIP700 steels10.1016/j.matdes.2014.01.001 ↗
33. Isolating contribution of individual phases during deformation of high strength–high toughness multi-phase pipeline steel10.1016/j.msea.2015.04.043 ↗
34. Effect of grain boundary characteristics on the oxidation behavior of ferritic stainless steel10.1016/j.corsci.2011.08.020 ↗
35. Kofstad · 1966
36. The role of aluminum and titanium on the oxidation process of a nickel-base superalloy in steam at 800 °C10.1007/BF00656727 ↗
37. Effects of alloyed aluminum and titanium on the oxidation behavior of INCONEL 740 superalloy10.1016/j.jallcom.2015.10.198 ↗
38. Young · 2008
39. Roles of Mn in the HIgh-temperature Air Oxidation of 9Cr ferritic–martensitic steel after severe plastic deformation10.1007/s11085-017-9796-3 ↗
40. The effect of surface treatment on the oxidation of ferritic stainless steels used for solid oxide fuel cell interconnects10.1016/j.jpowsour.2008.06.010 ↗
41. Initial oxidation of a 9% CrMo‐and a 12% CrMoV‐steel10.1002/srin.200405925 ↗
42. Effect of shot blasting on oxidation behavior of TP304H steel at 610–770° C in water vapor10.1016/j.matlet.2005.08.046 ↗
43. The effect of surface finish on the scaling behavior of stainless steel in steam and supercritical water10.1007/s11085-013-9380-4 ↗
44. Effect of shot peening on the oxidation resistance of TP304H and HR3C steels in water vapor10.1007/s11085-011-9270-6 ↗
45. On the influence of cold work on the oxidation of some stainless steels10.1002/maco.19830341003 ↗
46. Initial oxidation and chromium diffusion. I. Effects of surface working on 9–20% Cr steels10.1016/j.corsci.2003.09.004 ↗
47. Effects of surface deformation on the oxidation behavior of INCONEL 740 superalloy in humid air10.1016/j.jallcom.2016.05.057 ↗
48. Analysis on high-temperature corrosion characteristic of 0Cr18Ni9NbCu3BN steel
49. Fireside corrosion of austenitic tube materials for advanced USC boilers10.4028/www.scientific.net/MSF.696.206 ↗
50. Sulfate-induced high-temperature corrosion of nickel10.1007/BF00603787 ↗
51. Sulfate-induced hot corrosion of nickel10.1007/BF00656835 ↗
52. Liu · 2014
53. Oxidation of Ni-Cr alloy at intermediate oxygen pressures. I. Diffusion mechanisms through the oxide layer10.1016/j.corsci.2016.05.025 ↗
54. Diffusion of 18 O in massive Cr 2 O 3 and in Cr 2 O 3 scales at 900° C and its relation to the oxidation kinetics of chromia forming alloys10.1007/BF01046900 ↗
55. Growth mechanism of Cr2O3 scales: oxygen and chromium diffusion, oxidation kinetics and effect of yttrium10.1016/0921-5093(96)10173-8 ↗
56. Effect of oxide grain structure on the high-temperature oxidation of Cr10.1007/BF00611694 ↗
57. Oxidation of a Fe–18Cr–8Ni austenitic stainless steel at 850 °C in O2: microstructure evolution during breakaway oxidation10.1016/j.corsci.2016.10.029 ↗
58. Theoretical analysis of the diffusion processes determining the oxidation rate of alloys10.1149/1.2779605 ↗
59. Temperature effect on oxidation behavior of Ni-Cr alloys in CO2 gas atmosphere10.1149/2.1021706jes ↗
60. Tracer diffusion of Cr in Ni and Ni-22Cr studied by SIMS10.1016/j.mtla.2018.08.004 ↗
61. Alloy depletion profiles during non-protective oxidation10.1016/0010-938X(84)90052-0 ↗
62. Grain boundary self-diffusion of 51Cr and 59Fe in austenitic Ni□ Fe□ Cr alloys10.1016/0921-5093(91)90830-G ↗
63. Grain boundary diffusion of chromium in polycrystalline nickel studied by SIMS10.1016/j.mtla.2019.100283 ↗
64. Volume and grain boundary diffusion of chromium in Ni-base Ni-Cr-Fe alloys10.2320/matertrans.44.40 ↗
65. The Cr− Ni (Chromium-Nickel) system10.1007/BF02867812 ↗
66. Atomistic simulation of an fcc/bcc interface in Ni□ Cr alloys10.1016/S1359-6454(97)00159-6 ↗
67. Deleterious effect of Ti addition on the oxidation resistance of Ni–20Cr alloy10.2320/matertrans1960.22.691 ↗
68. High Temperature Oxidation of Ni–20Cr–xTiO2 Alloys10.2320/matertrans1960.23.473 ↗
69. Analysis of oxidation behavior of Ni-base superalloys by laser-induced breakdown spectroscopy10.1039/c2ja30138e ↗
70. Long-term oxidation of superalloys10.1007/BF00610842 ↗
71. Chromia layer growth on a Ni-based superalloy: sub-parabolic kinetics and the role of titanium10.1016/j.corsci.2013.05.016 ↗
72. An XAS study of the defect structure of Ti-doped α-Cr2O310.1016/j.ssi.2006.08.028 ↗