Oxide cracking behaviour of Cu-added 18%Cr-8%Ni austenitic alloy after steam oxidation
Source abstract
Abstract
Abstract In this work, the oxidation behaviour of Cu-added 18 %Cr-8%Ni alloy was investigated. A duplex scale with outer Fe3O4 and inner FeCr2O4 layers was formed on the alloy surface. Due to its low oxygen affinity, Cu was ejected and segregated around the Fe3O4/FeCr2O4 interface and the scale/matrix interface during oxidation. Moreover, the supersaturation of Cu at the subsurface facilitated the extensive precipitation of Cu rich particles. As the dislocation shearing of these particles requires higher stress, the major fraction of strain energy was consumed at the subsurface. Thus, crack nucleation and propagation in the oxide scale on Cu-added alloy were suppressed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Materials for ultrasupercritical coal power plants—boiler materials: part 110.1361/105994901770345394 ↗
2. U.S. program on materials technology for ultra-supercritical coal power plants10.1361/10599490524039 ↗
3. Materials for ultra-supercritical coal-fired power plant boilers10.1016/j.ijpvp.2006.08.006 ↗
4. Development history and operation experience of ultra-supercritical (USC) power plants
5. Research and development of advanced boiler steel tubes and pipes used for 600°C USC power plants in China
6. On precipitates in Fe–Ni base alloys used for USC boilers10.1179/1743284714Y.0000000620 ↗
7. Structure and properties of Super 304H steel for pressure elements of boilers with ultra-supercritical parameters
8. Long term properties and microstructural evolution of 18Cr-10Ni-3Cu-Ti-Nb austenitic stainless steel for boiler tube application
9. Properties, structure and creep resistance of austenitic steel Super 304H10.3139/120.110791 ↗
10. The precipitation strengthening behavior of Cu-rich phase in Nb contained advanced Fe–Cr–Ni type austenitic heat resistant steel for USC power plant application10.1016/j.pnsc.2012.05.002 ↗
11. Creep properties and microstructural evolution of austenitic TEMPALOY steels10.1016/j.ijpvp.2010.03.009 ↗
12. Tohyama · 2001 · 30
13. Spalling of steam-grown oxide from superheater and reheater tube steels
14. Oxide spalling in stainless steel superheater and reheater tubes and possible control measures
15. Boiler materials for ultra-supercritical coal power plants—steamside oxidation10.1361/105994906X108756 ↗
16. Effect of surface nanocrystallization on the sensitization and desensitization behavior of Super304H stainless steel10.1016/j.corsci.2016.06.012 ↗
17. In-situ monitoring of stress corrosion cracking of 304 stainless steel in high-temperature water by analyzing acoustic emission waveform10.1016/j.corsci.2018.10.022 ↗
18. Intergranular corrosion behavior associated with delta-ferrite transformation of Ti-modified Super304H austenitic stainless steel10.1016/j.corsci.2014.10.031 ↗
19. Acoustic emission response of sensitized 304 stainless steel during intergranular corrosion and stress corrosion cracking10.1016/j.corsci.2013.04.014 ↗
20. Steam oxidation of Super 304H and shot-peened Super 304H10.3184/096034012X13316633785757 ↗
21. The oxidation resistance of fine-grained sputter-deposited 304 stainless steel10.1007/BF02686409 ↗
22. Effect of grain refinement on the resistance of 304 stainless steel to breakaway oxidation in wet air10.1016/j.actamat.2005.07.019 ↗
23. Oxidation behaviour of Sanicro 25 in CO2 and H2O-rich environments
24. Microstructural stability and oxidation behavior of Sanicro 25 during long-term steam exposure in the temperature range 600–750 °C10.1002/maco.201407901 ↗
25. Oxidation behaviour of Sanicro 25 (42Fe22Cr25NiWCuNbN) in O2/H2O mixture at 600 °C10.1007/s11085-011-9281-3 ↗
26. Effect of yttrium on the cyclic oxidation behaviour of HP40 heat-resistant steel at 1373K10.1016/j.corsci.2010.09.039 ↗
27. Role of grain boundaries on the cyclic steam oxidation behaviour of 18-8 austenitic stainless steel10.1007/s11085-015-9603-y ↗
28. Impact of the voids on the cracking behavior of the duplex oxide scale on the 18%Cr austenite alloy surface
29. Effect of yttrium on the oxide scale adherence of pre-oxidized silicon-containing heat-resistant alloy10.1016/j.corsci.2011.07.002 ↗
30. Li · 2001
31. Tensile cracking of a chromia layer on a stainless steel during thermal cycling with hold periods10.1016/j.msea.2005.08.193 ↗
32. The kinetics of duplex scale formation on 18/8 type stainless steel10.1007/BF00742115 ↗
33. Early oxidation mechanism of austenitic stainless steel TP347H in supercritical water10.1016/j.corsci.2017.09.023 ↗
34. Development of oxidation resistant ferritic steels for advanced high efficiency steam power plants
35. Conditions for the initiation of oxide-scale cracking and spallation10.1016/0010-938X(84)90051-9 ↗
36. Mechanical properties of oxide scales10.1007/BF01046722 ↗
37. The mechanical failure of oxide scales under tensile or compressive load10.1007/BF01352181 ↗
38. Investigating the effect of Cu-rich phase on the corrosion behavior of Super 304H austenitic stainless steel by TEM10.1016/j.corsci.2017.11.001 ↗
39. Strengthening effect of precipitate phase in Super304H austenitic heat-resistant steel after long-term aging
40. Thermal degradation of alloy CCA617 in pure steam at 750 and 850°C10.1080/1478422X.2015.1104066 ↗
41. Effect of specimen thickness on the creep response of a Ni-based single-crystal superalloy10.1016/j.actamat.2012.06.043 ↗
42. Phenomenological modeling of the effect of specimen thickness on the creep response of Ni-based superalloy single crystals10.1016/j.actamat.2013.07.028 ↗
43. Modelling and analysis of the oxidation influence on creep behaviour of thin-walled structures of the single-crystal nickel-base superalloy René N5 at 980 °C10.1016/j.actamat.2009.11.004 ↗
44. Argon · 2008
45. Mott · 1948
46. Multi-component solid solution hardening10.1007/BF00540987 ↗
47. The deformation and ageing of mild steel: II characteristics of the l ders deformation10.1088/0370-1301/64/9/302 ↗
48. The cleavage strength of polycrystals
49. Modeling solid solution strengthening in nickel alloys10.1007/s11661-997-0268-2 ↗
50. Yielding in nickel as a function of grain or cell size10.1016/0001-6160(75)90142-X ↗
51. NIMS · 2009
52. NRIM · 1986
53. Study of cracking and spalling of Cr2O3 scale formed on Ni-30Cr alloy10.1007/BF00666390 ↗