Silicon effects on the wet oxidation of type 310 stainless steel
Source abstract
Abstract
Abstract The wet oxidation performance of a high-Si (5.9 wt.%) Type 310 stainless steel exposed in flowing ambient pressure (0.1 MPa) air-10% H2O mixture at 800 °C was investigated. A lower parabolic rate constant, relative to that exhibited by conventional low-Si (0.6 wt.%) Type 310S stainless steel, in the observed paralinear kinetics is linked to the formation of a continuous SiO2 layer at the oxide scale/metal interface. Accelerated formation of non-protective Fe-rich oxides is significantly delayed due to Cr-rich silicide intermetallic phase, present in the starting microstructure, serving as reservoir to sufficiently supply Cr to replace oxidized Cr lost to volatilization.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. Investigation into the failure mechanism of chromia scale thermally grown on an austenitic stainless steel in pure steam10.1016/j.corsci.2016.03.021 ↗
2. Effect of grain refinement on the resistance of 304 stainless steel to breakaway oxidation in wet air10.1016/j.actamat.2005.07.019 ↗
3. Investigation of high temperature corrosion behavior on 304L austenite stainless steel in corrosive environments10.1063/1.4895188 ↗
4. High-temperature oxidation of advanced FeCrNi alloy in steam environments10.1016/j.apsusc.2017.06.318 ↗
5. About the role of chromium and oxygen ion diffusion on the growth mechanism of oxidation films of the AISI 304 austenitic stainless steel10.1007/s11085-012-9301-y ↗
6. Surface phase transformation in austenitic stainless steel induced by cyclic oxidation in humidified air10.1016/j.corsci.2015.08.030 ↗
7. Early oxidation mechanism of austenitic stainless steel TP347H in supercritical water10.1016/j.corsci.2017.09.023 ↗
8. Oxidation of an austenitic stainless steel with or without alloyed aluminum in O2 + 10% H2O environment at 800 °C10.1016/j.corsci.2017.03.015 ↗
9. Reduction of chromium volatilisation from stainless steel interconnector of solid oxide electrochemical devices by controlled preoxidation10.1016/j.corsci.2016.02.002 ↗
10. Oxidation of 310 steel in H2O/O2 mixtures at 600C: the effect of water-vapour-enhanced chromium evaporation10.1016/S0010-938X(02)00056-2 ↗
11. Breakaway oxidation behaviour of ferritic stainless steels at 1150 °C in humid air10.1016/j.corsci.2016.02.042 ↗
12. Nano-crystalline coating to improve cyclic oxidation resistance of 304 stainless steel10.1016/j.surfcoat.2012.12.007 ↗
13. Evidence for chromium evaporation influencing the oxidation of 304L: the effect of temperature and flow rate10.1023/A:1014877600235 ↗
14. Investigation on the enhanced oxidation of ferritic/martensitic steel P92 in pure steam10.3390/ma7042772 ↗
15. Mechanisms of chromia scale failure during the course of 15–18Cr ferritic stainless steel oxidation in water vapour10.3184/096034005782750527 ↗
16. The effect of H2 and H2O on the oxidation of 304L-stainless steel at 600 °C: general behaviour (Part I)10.1007/s11085-015-9597-5 ↗
17. A Review of the oxidation behaviour of structural alloys in steam10.1179/095066010X12646898728165 ↗
18. Implications of steam oxidation for the service life of high-strength martensitic steel components in high-temperature plant10.1016/j.ijpvp.2006.09.008 ↗
19. Pint · 2003 · 1057
20. High temperature oxidation behaviour of ferritic stainless steel SUS 430 in humid air10.1007/s12540-015-4168-5 ↗
21. Characterization of the oxides formed at 1000 °C on the AISI 316L stainless steel-Role of molybdenum10.1016/j.matchemphys.2008.04.054 ↗
22. Cyclic oxidation performance of silicon-alloyed stainless steels in dry and moist air10.1179/174327805X66254 ↗
23. Influence of silicon and aluminum additions on the oxidation resistance of a lean-chromium stainless steel10.1023/A:1015344220073 ↗
24. Effect of water vapour partial pressure on the chromia (Cr2O3)-based scale stability10.1080/00084433.2017.1373968 ↗
25. Influence of silicon additions on the oxidation resistance of a stainless steel10.1007/BF00656225 ↗
26. Thermal oxidation kinetics and oxide scale adhesion of Fe-15Cr alloys as a function of their silicon content10.1016/j.actamat.2006.04.023 ↗
27. Effect of Cr content on corrosion resistance of Fe-Cr-Ni alloys exposed in Supercritical Water (SCW)
28. Comparison of the effects of small additions of silicon or aluminum on the oxidation of iron-chromium alloys10.1007/BF00666463 ↗
29. Oxide growth stresses in an austenitic stainless steel determined by creep extension10.4028/www.scientific.net/MSF.461-464.755 ↗
30. Oxidation behavior of a new wrought Ni-30Fe-20Cr based alloy at 750 °C in pure steam and the effects of alloyed yttrium10.1016/j.corsci.2017.06.009 ↗
31. Microstructural investigation of the effect of water vapour on the oxidation of alloy 353 MA in oxygen at 700 and 900 °C10.3184/096034005782744461 ↗
32. Degradation of ferritic stainless steels at 1200 °C in air10.1002/maco.201709577 ↗
33. High-temperature oxidation resistance of Al2O3- and Cr2O3-forming heat-resisting alloys with noble metals and rare earths10.1149/1.3315791 ↗
34. Factors affecting chromium carbide precipitate dissolution during alloy oxidation10.1023/A:1018880019395 ↗
35. Effect of annealing conditions on in situ formation of Cr2O3 diffusion barrier10.1080/02670844.2016.1202672 ↗
36. Water vapor oxidation of ferritic 441 and austenitic 316L stainless steels at 1100 °C for short duration10.1016/j.mspro.2015.04.006 ↗
37. High temperature oxidation of 304L stainless steel and its effect on glass-to-metal joining
38. Ion microprobe study of the scale formed during high temperature oxidation of high silicon EN-1.4301 stainless steel10.1016/S0168-583X(01)00358-5 ↗
39. The effect of silicon and manganese on the oxidation mechanism of Ni-20 Cr10.1007/BF00603657 ↗
40. Effects of silicon on the oxidation behavior of Ni-base chromia-forming alloys10.1007/s11085-006-9003-4 ↗
41. High-temperature oxidation of Fe-Cr-AI-Si alloys extruded into honeycomb structures10.1007/BF01050798 ↗
42. Oxidation behaviour of Fe–40 at.-% Al intermetallics with Li or Cu additions at high temperature10.1080/1478422X.2017.1297601 ↗
43. Influence of minor alloying elements on the initial stages of oxidation of austenitic stainless steel materials10.1002/sia.2855 ↗
44. The use of model alloys to develop corrosion-resistant stainless steels10.4028/www.scientific.net/MSF.461-464.815 ↗
45. Observations on the microstructure of 20Cr-25Ni-Nb stainless steel after exposure to iodine vapor during creep at 750 °C10.1007/BF00603759 ↗
46. Internal attack during the oxidation of nitrided stainless steels10.1007/BF00611600 ↗
47. Alloy design strategies for promoting protective oxide-scale formation10.1007/s11837-000-0109-x ↗
48. Alloy phase transformations driven by high temperature corrosion processes10.1016/S0010-938X(01)00065-8 ↗
49. Wet oxidation performance of Type 310S stainless steel
50. Cycle chemistry and its effect on materials in a supercritical water-cooled reactor: a synthesis of current understanding10.1016/j.corsci.2012.08.006 ↗
51. ASTM E112-13 · 2013
52. ImageJ Software, https://imagej.nih.gov/ij/.
53. EFTEM and EELS analysis of the oxide layer formed on HCM12A exposed to SCW10.1016/j.jnucmat.2012.06.017 ↗
54. Selective oxidation synthesis of MnCr2O4 spinel nanowires from commercial stainless steel foil
55. Characterisation of CoFe3O4 core shell nanoparticles using advanced electron microscopy10.1039/c3nr33789h ↗
56. Systematic study of the growth of aligned arrays of α-Fe2O3 and Fe3O4 nanowires by a vapor–solid process10.1002/adfm.200600499 ↗
57. Oxidation of Ni-Cr alloy at intermediate oxygen pressures. I. Diffusion mechanisms through the oxide layer10.1016/j.corsci.2016.05.025 ↗
58. High temperature oxidation of fuel cladding candidate materials in steam-hydrogen environments10.1016/j.jnucmat.2013.05.047 ↗
59. Thermodynamic and kinetics aspects of high temperature oxidation on a 304L stainless steel10.1007/s11085-013-9465-0 ↗
60. Kinetic and metallographic study of oxidation at high temperature of cast Ni-25Cr alloy in water vapour rich air10.1179/1878641314Y.0000000041 ↗
61. Effects of water vapour on the oxidation of chromia formers10.4028/www.scientific.net/MSF.595-598.1189 ↗
62. Oxidation behavior of Fe-25Cr-20Ni-2.8Si during isothermal oxidation at 1,286 K; Life-time prediction10.1007/s11085-008-9097-y ↗
63. Metallic interconnectors for solid oxide fuel cells – a review
64. The effect of silicon addition on the high temperature oxidation of a Fe-Cr Alloy10.4028/www.scientific.net/MSF.461-464.117 ↗
65. Microstructural analysis of Cr35Ni45Nb heat-resistant steel after a five-year service in pyrolysis furnace10.1016/j.engfailanal.2017.05.014 ↗
66. Effect of alloy grain size and silicon content on the oxidation of austenitic Fe-Cr-Ni-Mn-Si alloys in pure O210.1007/BF00662967 ↗
67. Mechanism of change in chemical composition of oxide inclusions in Fe–Cr alloys deoxidized with Mn and Si by heat treatment at 1473 K10.2355/isijinternational.51.1944 ↗
68. Preparation of Fe/Cr doped SiO2 thin film on 304 stainless steel substrate originated from corrosion10.1179/174327809X409196 ↗
69. High temperature corrosion behavior of siliconized 310 stainless steel10.1016/S0254-0584(99)00264-3 ↗
70. Effects of silicon on high temperature corrosion of Fe-Cr and Fe-Cr-Ni alloys in carbon dioxide10.1007/s11085-013-9467-y ↗
71. High temperature treatment of Cr3C2 @SiC-NFA composites in water vapor environment10.1016/j.corsci.2017.12.007 ↗
72. Steam oxidation and chromia evaporation in ultrasupercritical steam boilers and turbines10.1149/1.3155442 ↗
73. Influence of water vapour on 316l oxidation at high temperature - insitu x-ray diffraction10.3166/acsm.39.107-114 ↗
74. Stability of chromia (Cr2O3)-based scales formed during corrosion of austenitic Fe-Cr-Ni alloys in flowing oxygenated supercritical water10.5006/1982 ↗
75. Precipitation evolution and creep strength modelling of 25Cr20NiNbN austenitic steel10.1179/1878641315Y.0000000007 ↗