Wear-reducing nickel-phosphorus and graphene oxide-based composite coatings: Microstructure and corrosion behavior in high temperature geothermal environment
Source abstract
Abstract
Polymer coating modified with graphene oxide (GO) and duplex electroless Nickel-Phosphorus (Ni-P) with polytetrafluoroethylene (PTFE) coating were investigated for their corrosion behavior in simulated high-temperature geothermal environments with/without H2S and CO2 gases for geothermal applications. The polymer coating with added GO nanosheets demonstrated low wetting ability and suppressed corrosion effects of the substrate at 120 °C. The Ni-P/PTFE duplex coating with the lowest P content was suitable in an H2O liquid environment at 120 °C while high P was more promising in the two-phase CO2/H2S environment. Nevertheless, all the coatings were unprotective and allowed substrate corrosion at 250 °C in the H2S/CO2 environment.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. H.S. Klapper, J. Stevens, Challenges for metallic materials facing HTHP geothermal drilling, in: Proceedings of the NACE – International Corrosion Conference Serie., 2013.10.5006/C2013-02252 ↗
2. P.F.I. Ellis, M.F. Conover, Materials Selection Guidelines for Geothermal Energy Utilization Systems, 1981. 〈https://doi.org/10.2172/6664808〉.10.2172/6664808 ↗
3. T. Kaya, P. Hoşhan, Corrosion and material selection for geothermal systems, in: Proceedings of the World Geothermal Congress, Antalya, Turkey, 2005, pp. 24–29.
4. Analysis of corrosion failure and materials selection for CO2–H2S gas well10.1016/j.jngse.2020.103734 ↗
5. Tribology of electroless nickel coatings - a review10.1016/j.matdes.2010.11.013 ↗
6. Microstructure and oxidation behavior of sol-gel mullite coating on SiC-coated carbon/carbon composites10.1016/j.jeurceramsoc.2015.06.033 ↗
7. S.N. Karlsdottir, I.O. Thorbjornsson, Corrosion testing down-hole in sour high temperature geothermal well in Iceland, in: Proceedings of the NACE – International Corrosion Conference Series, 2013.10.5006/C2013-02550 ↗
8. Corrosion, scaling and material selection in geothermal power production
9. R. Bäßler, J. Sobetzki, H.S. Klapper, Corrosion resistance of high-alloyed materials in artificial geothermal water, in: Proceedings of the NACE – International Corrosion Conference Expo, 2013, p. 2327.10.5006/C2013-02327 ↗
10. Sugama · 2015
11. Poly (phenylenesulfide)-based coatings for carbon steel heat exchanger tubes in geothermal environments10.1023/A:1020806012202 ↗
12. Polyethersulfone coating for mitigating corrosion of steel in geothermal
13. Polyphenylenesulfied/montomorillonite clay nanocomposite coatings: their efficacy in protecting steel against corrosion10.1016/j.matlet.2006.01.111 ↗
14. Tribological properties of Tin-based Babbitt bearing alloy with polyurethane coating under dry and starved lubrication conditions10.1016/j.triboint.2015.03.032 ↗
15. Hydrothermal degradation study of phenolic polymer coatings by advanced analytical methods10.1007/BF02698399 ↗
16. High temperature friction and wear properties of graphene oxide/polytetrafluoroethylene composite coatings deposited on stainless steel10.1039/C5RA23509J ↗
17. A brief review of corrosion protective films and coatings based on graphene and graphene oxide10.1016/j.jallcom.2018.06.133 ↗
18. Covalently-grafted graphene oxide nanosheets to improve barrier and corrosion protection properties of polyurethane coatings10.1016/j.carbon.2015.05.094 ↗
19. Monolayered versus multilayered electroless NiP coatings: Impact of the plating approach on the microstructure, mechanical and corrosion properties of the coatings10.1016/j.surfcoat.2019.04.013 ↗
20. Deposition of electroless Ni-P graded coatings and evaluation of their corrosion resistance10.1016/j.surfcoat.2004.10.014 ↗
21. Unraveling the effects of CO2 and H2S on the corrosion behavior of electroless Ni-P coating in CO2/H2S/Cl– environments at high temperature and high pressure10.1016/j.corsci.2018.12.022 ↗
22. Stability of an electrodeposited nanocrystalline Ni-based alloy coating in oil and gaswells with the coexistence of H2S and CO210.3390/ma10060632 ↗
23. Electroless Ni-plating on PTFE fine particles10.1016/j.jfluchem.2008.02.002 ↗
24. Corrosion and wear resistance study of Ni-P and Ni-P-PTFE nanocomposite coatings
25. Corrosion resistance properties of electroless nickel composite coatings10.1016/j.electacta.2004.04.023 ↗
26. G. Oppong Boakye, O. Straume, B.A. Rodriguez, D. Kovalov, S.N. Karlsdottir, Microstructural characterization, corrosion and wear properties of graphene oxide modified polymer coatings for geothermal drilling applications, in: Proceedings of the NACE – International Corrosion Conference, 2020, pp. 1–9.10.5006/C2021-16474 ↗
27. The effect of polytetrafluoroethylene (PTFE) particles on microstructural and tribological properties of electroless Ni-P+PTFE duplex coatings developed for geothermal applications
28. NACE MR0175/ ISO 15156-1, Petroleum and Natural Gas industries. Materials for Use in H2S-Containing Environments in Oil and Gas Production, 2009. 〈www.iso.org〉, (Accessed 1 May 2022).
29. Chemical quality and regulatory compliance of drinking water in Iceland10.1016/j.ijheh.2016.09.011 ↗
30. Raman spectroscopy on amorphous carbon films10.1063/1.362745 ↗
31. High temperature friction and wear properties of graphene oxide/polytetrafluoroethylene composite coatings deposited on stainless steel10.1039/C5RA23509J ↗
32. E.O. Straume, G. Oppong Boakye, B. Alonso, S.N. Karlsdóttir, High temperature testing of materials and corrosion resistant coatings for geothermal drilling applications, in: Proceedings of the World Geothermal Congress 2020+1, Reykjavik, 2021, pp. 1–11. 〈pangea.standard.edu/ERE/db/WGC/papers/WGC/2020/27049.pdf〉, (Accessed 6 May 2022).
33. Designing reduced graphene oxide/zinc rich epoxy composite coatings for improving the anticorrosion performance of carbon steel substrate10.1016/j.matdes.2019.107694 ↗
34. Cornell · 2003
35. Micro-galvanic corrosion of steam generator materials within pores of magnetite flakes in alkaline solutions10.3390/met8110899 ↗
36. Mechanism and kinetics of magnetite oxidation under hydrothermal conditions10.1039/C9RA03234G ↗
37. The absolute energy positions of conduction and valence bands of selected semiconducting minerals10.2138/am-2000-0416 ↗
38. Effect of defect on corrosion behavior of electroless Ni-P coating in CO2-saturated NaCl solution10.1016/j.corsci.2018.01.041 ↗
39. An XPS investigation into the passivity of an amorphous Ni‐20P alloy10.1149/1.2095880 ↗
40. Infrared and Raman spectroscopy of cyclohexa(p-phenylene sulfide) and the polymer obtained therefrom10.1016/S0032-3861(98)00635-1 ↗
41. A model for high-temperature pitting corrosion in nickel-based alloys involving internal precipitation of carbides, oxides, and graphite10.1007/s11661-008-9494-5 ↗
42. In-situ corrosion testing of ENP-PTFE coatings in geothermal environment
43. Hydrogen transport in nickel10.13182/FST95-A30566 ↗
44. Hydrogen transport in nickel (111)10.1103/PhysRevB.55.10952 ↗
45. Corrosion behavior of materials in hydrogen sulfide abatement system at Hellisheiði geothermal power plant10.1016/j.geothermics.2017.06.010 ↗