Influence of various gaseous environments on SiO2 formation on the 330Cb (Fe-35Ni-18Cr-1Nb-2.15Si) alloy at 900 °C
Source abstract
Abstract
Abstract The influence of various gaseous environments on the 330Cb (Fe-35Ni-18Cr-1Nb-2.15Si) oxidation during 144 h, at 900 °C, has been studied. In air, a non-adherent Mn 1.5 Cr 1.5 O 4 and Cr 2 O 3 containing scale is formed and no continuous silica scale is observed at the alloy/oxide interface. In nitrogen, the chromia scale is adherent and a continuous cristobalite subscale is detected at the alloy/oxide interface. In Ar-5 vol.% H 2 , the oxide scale is mainly composed of chromia and manganese chromite. A thick cristobalite scale is also present at the alloy/oxide interface. On this austenitic alloy the protective silica scale formation is promoted by low oxygen containing gaseous environments and the high silicon content.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Failure and oxidation phenomena in Fe-35Ni-18Cr-2Si heating-element wire10.1007/BF00609305 ↗
2. Etude de l’oxydation de l’alliage 330Cb entre 800 et 1000 °C
3. The effect of manganese additions on the reactive evaporation of chromium in Ni–Cr alloys10.1016/j.scriptamat.2006.01.026 ↗
4. The long-term cyclic-oxidation behavior of selected chromia-forming alloys10.1023/A:1018874206733 ↗
5. 330Cb alloy (Fe-35Ni-18Cr-1iNb-2Si) oxidation study between 800 and 1000 °C10.1002/maco.200905442 ↗
6. Effect of various lanthanum sol-gel coatings on the 330Cb (Fe-35Ni-18Cr-1Nb-2Si) oxidation at 900 °C10.1016/j.apsusc.2011.07.079 ↗
7. Influence of carburisation on the 330Cb (Fe-35Ni-18Cr-1Nb-2Si) alloy oxidation at 900 °C10.1051/mattech/2010101 ↗
8. The effect of gas composition on the isothermal oxidation of PM chromium10.1016/S0010-938X(02)00022-7 ↗
9. Water vapor effect on the oxidation of Fe-21.5 wt.% Cr-5.6 wt.% Al at 1000 °C10.1007/BF02134786 ↗
10. Effects of water vapour on the oxidation of a Nickel-Base 625 alloy between 900–1100 °C10.1007/s10853-011-5544-2 ↗
11. Water Vapour Effect on Ferritic 4509 Steel Oxidation Between 800 and 1000 °C10.1007/s11085-011-9242-x ↗
12. Titanium distribution in multilayer oxide scales on oxidised incoloy 800H10.1116/1.573728 ↗
13. The effect of surface additives on the oxidation of chromia-forming alloys10.5006/1.3582016 ↗
14. Growth process of protective oxides formed on type 304 and 430 stainless steels at 1273 K10.1016/S0010-938X(97)00146-7 ↗
15. Oxidation of high-temperature alloys (superalloys) at elevated temperature in air II10.1007/BF01047036 ↗
16. The effect of oxide volatilization on the oxidation kinetics of Cr and Fe–Cr alloys10.1149/1.2424115 ↗
17. Relation between impurities and oxide-scale growth mechanism on Ni-34Cr and Ni-20Cr alloys I. influence of C, Mn, Si10.1007/BF00667415 ↗
18. High -temperature oxidation behavior of a wrought Ni–Cr–W–Mn–Si–La Alloy10.1007/BF01046988 ↗
19. Résistance à la corrosion à haute température des aciers inoxydables et alliages réfractaires
20. Stresses in NiO, Cr2O3 and Al2O3 oxides scales10.1016/0921-5093(94)09747-X ↗
21. Effect of alloy grain size and silicon content on the oxidation of austenitic FeCrNiMnSi alloys in pure O210.1007/BF00662967 ↗
22. Influence of silicon additions on the oxidation resitance of a stainless steel10.1007/BF00656225 ↗
23. Effet d’un film d’oxyde de cerium déposé à la surface de l’acier inoxydable Z4CN18-09 (AISI 304) sur son comportement vis-à-vis de l’oxydation a haute température
24. Improvement in the oxidation bahavior of austenitic stainless steels by superficially applied cerium oxide coatings10.1007/BF01196647 ↗
25. Factors affecting chromium carbide precipitate dissolution during alloy oxidation10.1023/A:1018880019395 ↗
26. Effect of rare earth metals and oxides addition on the high temperature oxidation of NiCr and FeCr alloys10.4028/www.scientific.net/MSF.43.75 ↗
27. The influence of implanted silicon on the cyclic oxidation behaviour of two different stainless steels10.1016/S0257-8972(99)00503-4 ↗
28. Ion microprobe study of the scale formed during high temperature oxidation of high silicon EN-1.4301 stainless steel (AISI 304)10.1016/S0168-583X(01)00358-5 ↗
29. The influence of alloying elements on the development and maintenance of protective scales10.1007/BF01046725 ↗
30. Effects of silicon on the oxidation behavior of Ni-base chromia-forming alloys10.1007/s11085-006-9003-4 ↗
31. Effect of silicon on the steam oxidation resistance of a 9%Cr heat resistant steel10.1023/B:OXID.0000016280.81734.3f ↗
32. Oxygen potential distribution during disappearance of the internal oxidation zone formed in the steam oxidation of Fe-9Cr-0.26Si ferritic steel at 973 K10.3184/096034005782750545 ↗
33. Formation and disappearance of an internal oxidation zone in the initial stage of the steam oxidation of Fe-9Cr-0.26Si ferritic steel10.1179/mht.2003.014 ↗
34. Effect of pre-oxidation at 800°C on the pitting corrosion resistance of the AISI 316L stainless steel10.1007/s11085-010-9218-2 ↗
35. Relations between oxidation kinetics and chromium diffusion in stainless steels10.4028/www.scientific.net/MSF.461-464.45 ↗
36. Changes of microstructures and high temperature properties during high temperature service of Niobium added ferritic stainless steels10.1016/S0921-5093(02)00831-6 ↗
37. Microanalysis of a stabilised austenitic stainless steel after long term ageing10.1016/S0921-5093(99)00234-8 ↗
38. The effect of the carbon and nitrogen contents on the fracture toughness of Type 347 austenitic stainless steels10.1016/j.msea.2005.05.069 ↗
39. Yttrium implantation effect on 304L stainless steel high temperature oxidation at 1000 °C10.1023/A:1019667825476 ↗
40. Effect of surface-applied reactive element on the early stage oxidation of Fe-18Cr-5Al and Fe-18Cr-5Al-1Hf alloys
41. The transition from oxidation to continuous-film formation during oxidation of dilute Ni–Si alloys10.1007/BF00666725 ↗
42. Calculation of boundary conditions between internal and external oxidation of silicon or chromium containing steels10.4028/www.scientific.net/MSF.696.88 ↗
43. Calculation of internal oxidation rate equations and boundary conditions between internal and external oxidation in silicon containing steels10.2320/matertrans.M2009256 ↗