The effect of Al on the oxidation behavior of Mo-6Si-12B-(1,2,4,8)Al alloys
Source abstract
Abstract
The isothermal and cyclic oxidation behavior of Mo-6Si-12B-(1, 2, 4, 8)Al samples was investigated from 800 to 1300 ℃. With increasing Al content, the isothermal oxidation resistance is enhanced and the pesting behavior is suppressed at 800 ℃. The Mo-6Si- 12B– 4 Al alloy with an oxide layer of both an alumino-borosilicate glasses and mullite has the best overall oxidation performance. An oxidation kinetics model was developed based upon the contributions of the individual phase oxidation rates weighted by their relative amounts and sizes that provides a good account of the oxidation behavior.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Mo-Si-B alloys: developing a revolutionary turbine-engine material10.1557/mrs2003.191 ↗
2. The hotter the engine, the better10.1126/science.1179327 ↗
3. 2006
4. Tensile creep of Mo–Si–B alloys10.1016/j.actamat.2009.11.054 ↗
5. High temperature oxidation of Mo–Si–B alloys: effect of low and very low oxygen partial pressures10.1016/j.actamat.2010.07.034 ↗
6. Dissolved Si in Mo and its effects on the properties of Mo–Si–B alloys10.1016/j.scriptamat.2009.09.008 ↗
7. The influence of Silicon on the strength and fracture toughness of Molybdenum10.1016/j.msea.2006.07.153 ↗
8. Silicoboride der Übergangsmetalle Vanadin, Niob, Tantal, Molybdän und Wolfram (Silicoborides of the transition metals vanadium, niobium, tantalum, molybdenum and tungsten)
9. Untersuchungen in den Dreistoffsystemen: Molybdän-Silizium-Bor
10. Phase stability and structural defects in high-temperature Mo–Si–B alloys10.1016/j.actamat.2008.07.015 ↗
11. Phase stability and alloying behavior in the Mo-Si-B system10.1007/s11661-005-0164-6 ↗
12. Interdiffusion kinetics in the Mo5SiB2 (T2) phase10.1007/BF02736562 ↗
13. Alloying and microstructure stability in the high-temperature Mo–Si–B system10.1016/j.jnucmat.2007.03.029 ↗
14. Examination of B in the Mo solid solution (Moss) in Moss + Mo5SiB2 + Mo2B alloys10.1016/j.scriptamat.2019.01.003 ↗
15. Microstructure, microhardness and oxidation behavior of Mo-Si-B alloys in the Moss+Mo2B+Mo5SiB2 three phase region10.1016/j.intermet.2019.106618 ↗
16. Oxidation mechanisms in Mo-reinforced Mo5SiB2(T2)–Mo3Si alloys10.1016/S1359-6454(02)00039-3 ↗
17. "Transient oxidation of Mo–Si–B alloys: effect of the microstructure size scale."10.1016/j.actamat.2009.06.036 ↗
18. Effects of the β phase size and shape on the oxidation behavior of NiCoCrAlY coating10.1016/j.corsci.2018.10.008 ↗
19. A diffusional analysis of the oxidation of binarymultiphase alloys10.1007/BF00664707 ↗
20. High-temperature oxidationbehavior of Al-Co-Cr-Ni-(Fe or Si) multicomponent high-entropy alloys10.1007/s11837-014-1185-7 ↗
21. Oxidation behavior of arc melted AlCoCrFeNi multicomponent high-entropy alloys10.1016/j.jallcom.2016.02.257 ↗
22. Optimization of reactive-element additions to improve oxidation performance of alumina-forming alloys10.1111/j.1151-2916.2003.tb03358.x ↗
23. Effect of quaternary additions on the oxidationbehavior of Hf-doped NiAl10.1023/A:1023087926788 ↗
24. The oxidation behaviour of sprayed MCrAlY coatings10.1016/S0257-8972(96)03039-3 ↗
25. Effect of third elements on the pesting suppression of Mo-Si-X intermetallics (X=AI, Ta, Ti, Zr and Y)10.1016/0966-9795(96)00019-2 ↗
26. The role of microstructure on pesting during oxidation of MoSi2 and Mo(Si,Al)2 at 773 K10.1007/BF01668515 ↗
27. The intermediate and high-temperature oxidation behaviour of (Mo,X)Si2 (X = W, Ta) intermetallic alloys10.1016/S0966-9795(96)00074-X ↗
28. Oxidation behaviour of the Mo–Si–B and Mo–Si–B–Al alloys in the temperature range of 700–1300 °C10.1016/j.intermet.2007.02.012 ↗
29. Isothermal oxidation behaviour of Mo–Si–B and Mo–Si–B–Al alloys in the temperature range of 400–800 °C10.1016/j.msea.2006.03.014 ↗
30. Julius C.Schuster and MSIT®®; Effenberg, G. (Ed.); SpringerMaterials; 20.12123.1.3 (Springer-Verlag GmbH, Heidelberg, 2005),
31. Structure and properties of mullite—A review10.1016/j.jeurceramsoc.2007.03.017 ↗
32. Thermodynamic modeling of the Al2O3-B2O3-SiO2 system10.1016/j.jnoncrysol.2009.06.036 ↗
33. Al2O3-SiO2 nano-bonded castables containing a boron-based sintering additive, refractories world
34. Engineering limitations of MoSi2 coatings10.1016/0921-5093(92)90313-P ↗