Corrosion behaviors of CoCrWAlx alloys by laser additive manufacturing in molten Al
Source abstract
Abstract
Abstract The CoCrW alloy was widely used for aluminum alloy die-casting mold of auto industry owing to excellent high temperature strength and corrosion resistance. However, the corrosion mechanism of cobalt-based alloy in molten Al has not been researched clearly, which inhibited improvement in resisting corrosion and service performance further. The CoCrWAlx alloys were prepared by direct laser deposition and the wetting and corrosion mechanism in molten Al were investigated. The microstructures of CoCrWAlx alloys and solid-liquid interface reaction products were characterized comprehensively. The CoCrWAlx alloys contained cobalt solid solution and precipitates that increased with Al. The reaction interfacial structure was composed of five sub-layers: alloy substrate, two products sub-layers, diffusion layer and solidified Al, and reaction products were identified to Al9Co2, Al5Co2 and Al45Cr7 phases. The growth kinetics of product layer and sub-layers were investigated and corresponding theoretical growth models of single and double compound layers were established. The effects of Al addition on corrosion resistance of cobalt-based alloys were analyzed with experiment and phase boundary wetting theory. The 2Al alloy obtained the lowest rate of product layer growth and corrosion loss among all alloys due to increased precipitates and strengthening matrix reduced both reaction-diffusion of molten Al and dissolved alloy substrate. The intrinsic affecting mechanism of adding Al into alloy to resist molten Al was investigated and provided an effective way to improve the corrosion resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Durability of materials in molten aluminum alloys10.1023/A:1004843621542 ↗
2. Thermal fatigue resistance of H13 steel treated by selective laser surface melting and CrNi alloying10.1016/j.apsusc.2013.01.209 ↗
3. Influence of microstructure on corrosion behavior of biomedical Co-Cr-Mo-W alloy fabricated by selective laser melting
4. High temperature oxidation behavior of Co-20Re-25Cr-2Si alloy at different oxygen pressures10.1016/j.corsci.2020.108562 ↗
5. The effect of Ni and Si additions on the oxidation behaviour of Co-17Re-18Cr alloys10.1016/j.corsci.2019.108135 ↗
6. Effects of alloyed Si on the oxidation behaviour of Co-29Cr-6Mo alloy for solid-oxide fuel cell interconnects10.1016/j.corsci.2015.02.036 ↗
7. Effect of cobalt-based coating microstructure on the thermal fatigue performance of AISI H13 hot work die steel10.1016/j.apsusc.2020.146360 ↗
8. Multi objective optimization of wire-electrical discharge machining of stellite using Taguchi – Grey approach10.1016/j.matpr.2020.06.515 ↗
9. Local strain evolution due to athermal γ→ε martensitic transformation in biomedical CoCrMo alloys10.1016/j.jmbbm.2013.12.019 ↗
10. Effect of heat-treatment temperature on microstructures and mechanical properties of Co–Cr–Mo alloys fabricated by selective laser melting10.1016/j.msea.2018.04.048 ↗
11. Interfacial reaction between Co-Cr-Mo alloy and liquid Al10.1016/j.corsci.2013.06.009 ↗
12. Interfacial reactions between molten Al and a Co-Cr-Mo alloy with and without oxidation treatment10.1016/j.corsci.2011.08.015 ↗
13. Microstructural characteristics and corrosion resistance in molten Zn-Al bath of Co-Mo-Cr-Si alloys10.1016/j.msea.2005.07.054 ↗
14. Strain-controlled iso-thermal fatigue behavior of Co–29Cr–6Mo used for tooling materials in Al die casting10.1016/j.msea.2017.07.047 ↗
15. Examining Cu content contribution to changes in oxide layer formed on selective-laser-melted CoCrW alloys10.1016/j.apsusc.2018.09.082 ↗
16. Microstructure, mechanical property and metal release of As-SLM CoCrW alloy under different solution treatment conditions10.1016/j.jmbbm.2015.10.019 ↗
17. A comparative assessment of iron and cobalt-based hard-facing alloy deformation using HR-EBSD and HR-DIC10.1016/j.actamat.2018.08.021 ↗
18. Fractures in tensile deformation of biomedical Co-Cr-Mo-N alloys10.1016/j.matlet.2010.12.007 ↗
19. The theory of transformations in metals and alloys
20. Developing the ductility and thermal fatigue cracking property of laser-deposited Stellite 6 coatings by adding titanium and nickel10.1016/j.matdes.2018.11.063 ↗
21. Effect of nitriding treatment on corrosion behaviour of Co-Cr-Mo alloy in liquid Al10.1016/j.corsci.2013.10.004 ↗
22. Combat molten aluminum corrosion of AISI H13 steel by low-temperature liquid nitrocarburizing10.1016/j.jallcom.2018.10.298 ↗
23. Influences of alloyed Si on the corrosion resistance of Co-Cr-Mo alloy to molten Al by iso-thermal oxidation in air10.1016/j.corsci.2015.08.014 ↗
24. Effect of Si on growth kinetics of intermetallic compounds during reaction between solid iron and molten aluminum10.1016/S1003-6326(13)62499-1 ↗
25. Corrosion resistance and interfacial morphologies of novel Fe-Cr-Mo-B cast steels in molten aluminum10.1016/j.corsci.2017.05.024 ↗
26. Review on corrosion resistance of mild steels in liquid aluminum10.1016/j.jmst.2020.08.052 ↗
27. Multiscale corrosion-resistance mechanisms of novel ferrous alloys in dynamic aluminum melts10.1016/j.corsci.2019.108276 ↗
28. Reactive wetting in metal/metal systems: dissolutive versus compound-forming systems10.1016/j.msea.2007.11.097 ↗
29. Instability of grain boundary grooves due to equilibrium grain boundary diffusion10.1016/0956-7151(91)90132-K ↗
30. The high temperature wetting and corrosion mechanism analysis of Nb by TiAl alloy melt10.1016/j.corsci.2021.109316 ↗
31. Solid/liquid interfacial energy and wetting of Cu at Co surfaces and grain boundaries10.1016/j.scriptamat.2008.08.028 ↗
32. Grain-boundary melting phase transition in the Cu-Bi system10.1103/PhysRevB.71.104104 ↗
33. Diffusion-induced grain boundary porosity in NiAl10.1016/S1359-6462(00)00324-9 ↗
34. Pressure influence on the grain boundary wetting phase transition in Fe-Si alloys10.1016/S1359-6454(96)00332-1 ↗
35. Grain boundary wetting transition in Al–Mg alloys10.1016/j.matlet.2016.09.088 ↗
36. Laser additive manufacturing of FeCrCoMnNi high-entropy alloy: Effect of heat treatment on microstructure, residual stress and mechanical property10.1016/j.jallcom.2019.01.213 ↗
37. An overview of direct laser deposition for additive manufacturing; part I: transport phenomena, modeling and diagnostics
38. An overview of direct laser deposition for additive manufacturing; part II: mechanical behavior, process parameter optimization and control
39. Computational thermodynamic and first-principles calculation of stacking fault energy on ternary Co-based alloys10.1016/j.commatsci.2017.11.004 ↗
40. Novel thermal barrier coatings with hexagonal boron nitride additives resistant to molten volcanic ash wetting10.1016/j.corsci.2020.108587 ↗
41. Investigation of austenitic FeCrNi steels with regard to stacking-fault energy and thermal austenite stability10.1016/j.mtla.2018.08.020 ↗
42. Experimental investigation and thermodynamic assessment of the Al-Co-Ni system
43. Effects of Al on microstructure and tensile properties of C-bearing high Mn TWIP steel10.1016/j.actamat.2011.12.004 ↗
44. Influences of alloyed Si on the corrosion resistance of Co-Cr-Mo alloy to molten Al by iso-thermal oxidation in air10.1016/j.corsci.2015.08.014 ↗
45. Interfacial reactions of solid Co and solid Fe with liquid Al10.1016/j.corsci.2012.04.015 ↗
46. Quantitative evaluation of interdiffusion in Fe2Al5 during reactive diffusion in the binary Fe-Al system10.2320/matertrans.47.1480 ↗
47. Reaction diffusion in heterogeneous binary systems - Part 2 growth of the chemical compound layers at the interface between two elementary substances: two compound layers10.1007/BF00553340 ↗
48. Thermodynamic modeling of the Al-Cr-Mn ternary system10.1007/s11661-016-3894-8 ↗
49. Thermodynamic assessment of Co-Al-W system and solidification of Co-enriched ternary alloys10.1007/s10853-010-5115-y ↗
50. Thermodynamic assessment of the system Al-Co10.1051/metal/199895091121 ↗
51. On the kinetic mechanism of grain boundary wetting in metals10.1063/1.369659 ↗
52. Role of the solid/liquid interface faceting in rapid penetration of a liquid phase along grain boundaries10.1016/S1359-6454(01)00039-8 ↗
53. Theory of thermal grooving10.1063/1.1722742 ↗
54. The high temperature wetting and corrosion mechanism analysis of Nb by TiAl alloy melt
55. Effect of temperature and reactivity of molten 55Al-Zn alloy on Co based alloy coatings10.1179/174328409X428954 ↗