Fabrication of low-temperature curing PES coatings with excellent anti-corrosion properties by introducing the crosslinking agent
Source abstract
Abstract
Abstract Low-temperature curing polyethersulfone (PES) coatings (LTCC-PES and LTCC-PES/PTFE) with excellent anti-corrosion properties have been successfully fabricated by introducing crosslinking agent. Water absorption of LTCC-PES is far lower than the common neat epoxy coatings, indicating LTCC-PES can display higher anti-corrosion properties. To further enhance the anti-corrosion properties of LTCC-PES, polytetrafluoroethylene (PTFE) is incorporated into LTCC-PES as filling agent to decrease the defects within LTCC-PES. Results show that LTCC-PES/PTFE exhibits lower water absorption and LTCC-PES/PTFE still possesses high anti-corrosion properties after long-term exposure to corrosive environment due to the further enhancing physical shielding effect of LTCC-PES/PTFE.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Polymer Nanocomposites and Properties · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Enhancement of the corrosion protection performance and cathodic delamination resistance of epoxy coating through treatment of steel substrate by a novel nanometric sol-gel based silane composite film filled with functionalized graphene oxide nanosheets10.1016/j.corsci.2016.04.004 ↗
2. Enhancement of barrier and corrosion protection performance of an epoxy coating through wet transfer of amino functionalized graphene oxide10.1016/j.corsci.2015.11.033 ↗
3. Polyaniline-lignosulfonate/epoxy coating for corrosion protection of AA2024-T310.1016/j.corsci.2012.10.022 ↗
4. Effects of highly crystalline and conductive polyaniline/graphene oxide composites on the corrosion protection performance of a zinc-rich epoxy coating10.1016/j.cej.2017.03.061 ↗
5. Improved interfacial adhesion in carbon fiber/polyether sulfone composites through an organic solvent-free polyamic acid sizing10.1016/j.apsusc.2013.04.085 ↗
6. Nanofilled polyethersulfone as matrix for continuous glass fibers composites: mechanical properties and solvent resistance10.1002/adv.20187 ↗
7. Sulfonation of polyethersulfone by chlorosulfonic acid10.1007/s00289-005-0361-x ↗
8. Kinetic and thermodynamics analysis of water absorption in unidirectional fiber reinforced composites by polyethersulphone and polyphenylence sulfide10.1016/j.colsurfa.2011.01.009 ↗
9. Gas and water vapor transport through a series of novel poly(aryl ether sulfone) membranes10.1021/ma011185c ↗
10. Poly(ether sulphone) as an engineering material10.1016/0032-3861(74)90058-5 ↗
11. Advance in preparation and modification of polyethersulfone nanofiltration membrane
12. Improvement of performance and surface properties of nano-porous polyethersulfone (PES) membrane using hydrophilic monomers as additives in the casting solution10.1016/j.memsci.2010.05.036 ↗
13. Highly compact lumped element resonators in LTCC for avionic systems
14. The role of compatibility between polymeric matrix and silane coupling agents on the performance of mixed matrix membranes: Polyethersulfone/MCM-4110.1016/j.memsci.2016.04.039 ↗
15. Improvement of the mechanical and thermal properties of polyethersulfone-modified epoxy composites10.1016/j.jiec.2015.09.022 ↗
16. Coupling TiO2 nanoparticles with UV irradiation for modification of polyethersulfone ultrafiltration membranes10.1016/j.memsci.2007.12.075 ↗
17. A facile method for synthesis of pegylated polyethersulfone and its application in fabrication of antifouling ultrafiltration membrane10.1016/j.memsci.2007.07.009 ↗
18. Effect of TiO2 nanoparticles on the surface morphology and performance of microporous PES membrane10.1016/j.apsusc.2008.07.139 ↗
19. Corrosion protection of steel by epoxy nanocomposite coatings containing various combinations of clay and nanoparticulate zirconia10.1016/j.corsci.2013.05.024 ↗
20. Reducing the water absorption in epoxy coatings by silane monomer incorporation10.1016/j.corsci.2006.02.005 ↗
21. Effect of nanoparticles on the anticorrosion and mechanical properties of epoxy coating10.1016/j.surfcoat.2009.06.048 ↗
22. Treatment of a coronary aneurysm with a new polytetrafluoethylene-coated stent: a case report10.1002/(SICI)1522-726X(199904)46:4<463::AID-CCD17>3.0.CO;2-I ↗
23. Materials for urinary catheters: a review of their history and development in the UK10.1016/j.medengphy.2004.12.013 ↗
24. Influence of polytetrafluoroethylene (PTFE) content on mechanical and tribological properties of poly(ether ether ketone)/PTFE coatings prepared by electrostatic powder spraying technique10.1177/0954008314537098 ↗
25. Water up-take evaluation of new waterborne and high solid epoxy coatings. Part I: measurements by means of gravimetrical methods10.1016/S0300-9440(99)00055-7 ↗
26. The failure behaviour of a commercial highly pigmented epoxy coating under marine alternating hydrostatic pressure10.1016/j.porgcoat.2015.01.009 ↗
27. Exploring corrosion protection properties of solvent based epoxy-graphene oxide nanocomposite coatings on mild steel10.1016/j.corsci.2016.11.008 ↗
28. Electrochemical corrosion of metallic biomaterials10.1016/0142-9612(84)90046-2 ↗
29. Using high-temperature mechanochemistry treatment to modify iron oxide and improve the corrosion performance of epoxy coating – I. High-temperature ball milling treatment10.1016/j.corsci.2014.04.015 ↗
30. Corrosion behaviour of chromium coatings obtained by direct and reverse pulse plating electrodeposition in NaCl aqueous solution10.1016/j.corsci.2013.10.005 ↗
31. Reinforcing the corrosion protection property of epoxy coating by using graphene oxide–poly(urea–formaldehyde) composites10.1016/j.corsci.2017.04.019 ↗
32. Silane-incorporated epoxy coatings on aluminum alloy (AA2024). Part 1: improved corrosion performance10.1016/j.corsci.2014.11.046 ↗
33. A facile and novel approach to magnetic Fe@SiO2and FeSi2@SiO2nanoparticles10.1039/C1JM13720D ↗