Enhancement of cyclic oxidation resistance and effect of transition oxides on wear mechanism of yttrium plus aluminium modified tribaloy T-900 alloy
Source abstract
Abstract
Abstract This paper investigated the microstructure, cyclic oxidation behaviour and wear mechanism of modified and unmodified Tribaloy T-900. Yttrium and aluminium addition promoted the selective oxidation of Al, which reduced the oxidation rate by forming continuous protective layer of Al2O3 at 1000 °C. Al2O3 layer hindered the formation of simultaneous internal oxidation and nitridation zone. Yttrium addition transforms the mechanism of grooving wear to rolling wear by increasing the surface passivation and adherence of transition oxides scale during sliding wear. Hardness of T-900Al and T-900AlY was increased due to refinement of Laves phase and precipitation of grey intermetallic phase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Influence of the F.C.C. Phase retained at room temperature on the mechanical properties of cobalt10.1016/0036-9748(78)90078-9 ↗
2. Heat treatment effects on the tribological performance of HVOF sprayed Co-Mo-Cr-Si coatings10.1361/105996306X146721 ↗
3. Laves phases for high temperatures—part II: stability and mechanical properties10.1016/S0966-9795(02)00025-0 ↗
4. Creep of intermetallics10.1179/mst.1992.8.4.363 ↗
5. Microstructure and tribological properties of solution-treated Tribaloy alloy10.1016/j.wear.2013.08.018 ↗
6. Characteristics of Tribaloy T-800 and T-900 coatings on steel substrates by laser cladding10.1016/j.surfcoat.2007.11.025 ↗
7. Effect of rhenium addition on isothermal oxidation behavior of tribaloy T-800 alloy10.1016/S1000-9361(09)60229-6 ↗
8. Improvement of the oxidation resistance of Tribaloy T-800 alloy by the additions of yttrium and aluminium10.1016/j.corsci.2010.11.038 ↗
9. Effect of yttrium and aluminium additions on isothermal oxidation behavior of Tribaloy T-700 alloys10.1016/j.corsci.2014.07.053 ↗
10. Influence of silicon additions on the oxidation resistance of a stainless steel10.1007/BF00656225 ↗
11. The fracture behaviour of two Co-Mo-Cr-Si wear resistant alloys (“Tribaloys”)10.1007/BF01026320 ↗
12. Impurity effects on alumina scale growth10.1111/j.1151-2916.2003.tb03355.x ↗
13. Impurity segregation at TGO/bond coat interfaces and its effect on TGO adherence
14. The effect of reactive element additions on the selective oxidation, growth and adhesion of chromia scales10.1016/0921-5093(95)09798-8 ↗
15. The formation of aluminium oxide scales on high-temperature alloys10.1007/BF00666913 ↗
16. Chapter 6 - alloy oxidation II: internal oxidation
17. Simultaneous internal oxidation and nitridation of Ni–Cr–Al alloys10.1023/A:1010304026026 ↗
18. Oxidation and hot corrosion of nickel-based alloys containing molybdenum10.1016/0010-938X(76)90010-X ↗
19. Characteristics of thin surface layers of cobalt-based alloys deposited by laser cladding10.1016/j.surfcoat.2005.03.033 ↗
20. Comparative cyclic oxidation behaviour and effect of oxides on hardness of wear resistance coating alloys T-401 and T-90010.1007/s42243-019-00258-2 ↗
21. Oxidation mechanism of cobalt based alloy at high temperatures (800–1100°C)10.1179/1743278212Y.0000000007 ↗
22. Improved Cr2O3 adhesion by Ce ion implantation in the presence of interfacial sulfur segregation10.1016/j.actamat.2006.07.047 ↗
23. Characterization and wear of oxides formed on CoCrMoSi alloy coatings10.1016/j.surfcoat.2017.07.081 ↗
24. Microstructure of HK40 alloy after high temperature service in oxidizing/carburizing environment: I. Oxidation phenomena and propagation of a crack10.1016/S1044-5803(02)00249-8 ↗
25. Studies on the structure of hard chromium plate10.1149/1.2777976 ↗
26. High temperature reaction of chromium with multi-oxidant atmospheres10.4028/www.scientific.net/MSF.251-254.567 ↗
27. Multi-sample thermobalance for rapid cyclic oxidation under controlled atmosphere10.4028/www.scientific.net/MSF.461-464.689 ↗
28. Protective effect of yttrium additive in lubricants on corrosive wear10.1016/S0043-1648(99)00039-3 ↗
29. Wear-mode mapping for the micro-scale abrasion test10.1016/S0043-1648(03)00073-5 ↗
30. On the wear characteristics of cobalt-based hardfacing layer after thermal fatigue and oxidation10.1016/S0043-1648(01)00668-8 ↗
31. Friction and wear characteristics of hard coatings10.1016/S0043-1648(01)00719-0 ↗
32. Effect of temperature and sliding velocity on TiN coating wear10.1016/S0257-8972(97)00475-1 ↗
33. Wear mechanism maps for TiN-coated high speed steel10.1016/S0257-8972(99)00414-4 ↗
34. The effect of oxide particles supplied at the interface before sliding on the severe-mild wear transition10.1016/0043-1648(88)90179-2 ↗
35. Solid particle erosion and erosion-corrosion of materials. Von Alan V. Levy, 220 seiten, ASM International, materials park, Ohio 1995, £ 84.00, ISBN 0-87170-519-2
36. Effects of silicon content on the microstructure and mechanical properties of cobalt-based tribaloy alloys10.1115/1.4034075 ↗