Porous geopolymer as a possible template for a phase change material
Source abstract
Abstract
Abstract Nowadays, the increase in energy demand has resulted in exhaustion of energy resources, climate change, and environmental pollution. A way to approach this issue and improve the environment is by reducing the consumption of energy in buildings, either by the employment of new materials or by using unified energy storage systems. Phase Change Materials (PCM's) which can be used to store thermal energy as latent heat, can be an alternative to reduce the consumption of energy in either houses or buildings. The key use in this alternative is the segregation of the PCM from the supporting material that may result in a damage to the human health of inhabitants. In the present paper, a non-toxic metakaolinite-based geopolymer was studied as an alternative to imbed dodecanol by using Hexadecyltrimethyl ammonium bromide (CTAB) as a coupling agent and a surface treatment with Tetraethyl orthosilicate (TEOS) to prevent segregation was assessed. Dodecanol-geopolymer samples were characterized by FT-IR, XRD and SEM; and energy storage and phase change temperature were measured by DSC. Finally, dodecanol load capacity was calculated. The effectiveness of CTAB as a coupling agent between the dodecanol and the geopolymer was showed while the surface treatment increases the load capacity of the dodecanol-geopolymer system studied.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Thermal energy storage cement mortar containing n-octadecane/expanded graphite composite phase change material10.1016/j.renene.2012.08.024 ↗
2. A review on buildings energy consumption information10.1016/j.enbuild.2007.03.007 ↗
3. Preparation , characterization and thermal properties of dodecanol/cement as novel form-stable composite phase change material10.1016/j.enbuild.2013.07.083 ↗
4. Synthesis and characterization of thermal energy storage microencapsulated n -dodecanol with acrylic polymer s5] hell10.1016/j.energy.2015.04.096 ↗
5. Use of microencapsulated PCM in concrete walls for energy savings10.1016/j.enbuild.2006.03.030 ↗
6. Experimental testing and numerical modelling of masonry wall solution with PCM incorporation: a passive construction solution10.1016/j.enbuild.2012.02.010 ↗
7. Numerical study on the thermal performance of building wall and roof incorporating phase change materials panel for passive cooling application10.1016/j.enbuild.2014.06.044 ↗
8. Phase change materials and thermal energy storage for buildings10.1016/j.enbuild.2015.06.007 ↗
9. Assessing the integration of a thin phase change material (PCM) layer in a residential building wall for heat transfer reduction and management10.1016/j.apenergy.2014.09.003 ↗
10. Incorporation of phase change materials in cementitious systems via fine lightweight aggregate10.1016/j.conbuildmat.2012.04.042 ↗
11. Fire behaviour of a mortar with different mass fractions of phase change material for use in radiant floor systems10.1016/j.enbuild.2014.07.026 ↗
12. Mechanical and thermo-physical behaviour of concretes and mortars containing phase change material10.1016/j.enbuild.2015.02.044 ↗
13. Utilization of macro encapsulated phase change materials for the development of thermal energy storage and structural lightweight aggregate concrete10.1016/j.apenergy.2014.11.022 ↗
14. Use of phase change materials for thermal energy storage in concrete: an overview10.1016/j.conbuildmat.2013.04.031 ↗
15. Phase change materials integrated in building walls: a state of the art review10.1016/j.rser.2013.12.042 ↗
16. Review of phase change materials integrated in building walls for energy saving10.1016/j.proeng.2015.09.027 ↗
17. Phase change materials and thermal energy storage for buildings10.1016/j.enbuild.2015.06.007 ↗
18. Preparation and characterization of PEG/SiO2 composites as shape-stabilized phase change materials for thermal energy storage10.1016/j.solmat.2013.07.017 ↗
19. An environmental evaluation of geopolymer based concrete production : reviewing current research trends10.1016/j.jclepro.2011.03.012 ↗
20. Carbon dioxide equivalent ( CO 2 -e ) emissions : a comparison between geopolymer and OPC cement concrete10.1016/j.conbuildmat.2013.01.023 ↗
21. Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement10.1016/j.jclepro.2011.02.010 ↗
22. Ramón Gasca-Tirado
23. Vibrational spectra of crystalline n-paraffins: Part I. Methylene rocking and wagging modes10.1016/0022-2852(60)90103-X ↗
24. Calcium ion interactions with insoluble phospholipid monolayer films at the A/W interface. External reflection-absorption IR studies10.1016/S0006-3495(93)81276-1 ↗
25. Effect of synthesis parameters on the mechanical properties of fly ash-based geopolymers10.1016/j.colsurfa.2006.12.064 ↗
26. The processing , characterization , and properties of fly ash based geopolymer concrete
27. Experimental study on the phase change behavior of phase change material confined in pores10.1016/j.solener.2006.08.010 ↗
28. Preparation, characterization and thermal properties of dodecanol/cement as novel form-stable composite phase change material10.1016/j.enbuild.2013.07.083 ↗
29. Strength and density of geopolymer mortar cured at ambient temperature for use as repair material10.1088/1757-899X/133/1/012042 ↗