The corrosion resistance mechanisms of the cr-coated SiC in molten Na2SO4 salt: Strengthened boundaries and protective scales
Source abstract
Abstract
Abstract The corrosion resistance of pressureless-sintered silicon carbide (SiC) plates in the molten Na2SO4 salt was greatly enhanced by their surfaces coated with magnetron-sputtered chromium (Cr) coatings. The Cr-coated SiC plates remained good structural integrity in the 1000 °C molten Na2SO4 salt for >20 h, in contrast to the uncoated ones that completely crushed into pieces after 4 h. The corrosion-resistance mechanisms mainly depend on the strengthened boundaries by formation of the Cr-C and Cr-Si compounds to avoid the preferred corrosion of boundaries, and the barrier effect of the Cr2O3/Cr/Cr-Si-C protective scale.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. A review of the efficacy of silicon carbide hot-gas filters in coal gasification and pressurized fluidized bed combustion environments
2. The application of ceramic-matrix composites to the automotive ceramic gas turbine10.1016/S0266-3538(99)00016-0 ↗
3. Influence of the preparation conditions on the synthesis of high surface area SiC for use as a heterogeneous catalyst support10.1023/A:1004681806843 ↗
4. Experimental investigation of compact silicon carbide heat exchangers for high temperatures10.1016/j.ijheatmasstransfer.2011.05.028 ↗
5. Frictional performance of silicon carbide under different lubrication conditions10.1007/s40544-014-0039-1 ↗
6. Self-healing mechanisms of a SiC fiber reinforced multi-layered ceramic matrix composite in high pressure steam environments10.1016/j.jeurceramsoc.2006.06.007 ↗
7. Mechanical behaviour and lifetime modelling of self-healing ceramic-matrix composites subjected to thermomechanical loading in air10.1016/j.compositesa.2008.10.020 ↗
8. Kinetics and mechanism of corrosion of SiC by molten salts10.1111/j.1151-2916.1986.tb04698.x ↗
9. Corrosion failures in gas turbine hot components10.1007/s11668-012-9571-3 ↗
10. Review – volcanic ash and its influence on aircraft engine components10.1016/j.proeng.2014.12.604 ↗
11. Corrosion of silicon carbide in gases and alkaline melts10.1111/j.1151-2916.1976.tb09514.x ↗
12. Corrosion of SiC ceramics by Na2S0410.1111/j.1551-2916.1988.tb00170.x ↗
13. Oxidation of silicon carbide in environments containing potassium salt vapor10.1111/j.1151-2916.1991.tb04059.x ↗
14. Hot corrosion of NiCrAlY/(ZrO2 - CeO2 - Y2O3) composite coatings in NaCl-Na2SO4 molten salt10.4028/www.scientific.net/MSF.658.228 ↗
15. Hot corrosion behaviour of plasma sprayed YSZ/LaMgAl11O19 composite coatings in molten sulfate–vanadate salt10.1016/j.corsci.2011.03.019 ↗
16. Corrosion resistance by HVOF coating on gas turbine materials of cobalt based superalloy
17. Birks · 2006
18. Corrosion of SiC, Si3N4 and AIN in molten K2SO4 - K2CO3 salts10.1016/0267-3762(86)90021-4 ↗
19. Hot corrosion of chemical vapour deposited SiC and Si3N4 in molten Na2SO4 salt10.1023/A:1004376231372 ↗
20. Raman spectral characterization of silicon carbide nuclear fuel coatings10.1111/j.1151-2916.1983.tb10075.x ↗
21. Raman spectroscopy in graphene10.1016/j.physrep.2009.02.003 ↗
22. Structural and chemical widths of general grain boundaries: modification of local structure and bonding by boron-doping in β-silicon carbide10.1023/A:1008720404554 ↗
23. Long-term corrosion behavior of CVD SiC in 360 °C water and 400 °C steam10.1016/j.jnucmat.2013.07.058 ↗
24. Corrosion behavior of reaction-bonded silicon carbide ceramics in high-temperature water10.1023/A:1015797324658 ↗
25. Corrosion behaviors of sintered and chemically vapor deposited silicon carbide ceramics in water at 360 °C10.1023/A:1023390111074 ↗
26. Effect of dissolved hydrogen on the corrosion behavior of chemically vapor deposited SiC in a simulated pressurized water reactor environment10.1016/j.corsci.2015.05.031 ↗
27. Microstructure and hydrothermal corrosion behavior of NITE-SiC with various sintering additives in LWR coolant environments10.1016/j.jeurceramsoc.2016.11.033 ↗
28. Effects of water vapour on isothermal oxidation of chromia-forming alloys in Ar/O2 and Ar/H2 atmospheres10.1016/j.corsci.2009.08.032 ↗
29. High temperature oxidation behavior of silicon carbide-carbon coated nanostructured ferritic alloy composites in air + water vapor environment10.1016/j.corsci.2018.05.008 ↗
30. High temperature oxidation and microstructural evolution of cold spray chromium coatings on Zircaloy-4 in steam environments10.1016/j.jnucmat.2019.151737 ↗
31. Experimental investigation and thermodynamic description of the constitution of the ternary system Cr-Si-C10.1111/j.1151-2916.2000.tb01513.x ↗
32. Grain boundary and volume diffusion experiments in yttrium aluminium garnet bicrystals at 1,723 K: a miniaturized study10.1007/s00410-011-0622-7 ↗
33. Grain size and grain-boundary effects on diffusion and trapping of hydrogen in pure nickel10.1016/j.actamat.2012.09.004 ↗
34. A disconnection mechanism of enhanced grain boundary diffusion in Al2O310.1016/j.scriptamat.2015.01.026 ↗
35. Gupta · 1988
36. Hot corrosion of materials: a fluxing mechanism？10.1016/S0010-938X(01)00057-9 ↗
37. Hot corrosion behavior and near-surface microstructure of a “low-temperature high-activity Cr-aluminide” coating on inconel 738LC exposed to Na2SO4, Na2SO4+ V2O5 and Na2SO4+ V2O5+ NaCl at 900 °C10.1016/j.corsci.2017.09.004 ↗