Anomalous cyclic oxidation behaviour of an Fe-Mn-Si-Cr-Ni alloy - A finite element analysis
Source abstract
Abstract
Abstract In previous research, an FeMnSiCrNi alloy presented anomalous behaviour during cyclic oxidation and gained mass after mass loss by spallation. Research clarified this phenomenon, but no stress analysis had been examined. This study investigates this anomalous behaviour using finite element analysis. FeMnSiCrNi alloy oxidation generates a Mn-depleted zone (ferrite) between the substrate (austenite) and oxide layer, and models containing austenite-ferrite-oxide demonstrated that increasing ferrite thickness and roughness (metal/oxide interface) decrease oxide layer stress, helping to comprehend why the alloy stops losing mass. The main cause, increasing roughness, was derived from ferrite plastic deformation and relates to austenite-ferrite thermal expansion mismatch.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Anomalous cyclic oxidation behaviour of a Fe–Mn–Si–Cr–Ni shape memory alloy10.1016/j.corsci.2017.02.026 ↗
2. A deterministic interfacial cyclic oxidation spalling model10.1016/S1359-6454(02)00430-5 ↗
3. Cyclic oxidation – guidelines for test standardisation, aimed at the assessment of service behaviour†
4. Oxidation behavior of an austenitic stainless FeMnSiCrNi shape memory alloy10.1016/j.corsci.2012.09.029 ↗
5. Kinetics oxidation and characterization of cyclically oxidized layers at high temperatures for FeMnSiCrNiCe and FeSiCrNi alloys10.1590/1980-5373-mr-2017-0098 ↗
6. The effect of Mn-depleted surface layer on the corrosion resistance of shape memory Fe-Mn-Si-Cr alloys10.1007/s11661-997-0287-z ↗
7. The role of the surface roughness on the integrity of thermally generated oxide scales. Application to the Al2O3/MA956 system10.1016/S0921-5093(97)00029-4 ↗
8. The effect of interface roughness and oxide film thickness on the inelastic response of thermal barrier coatings to thermal cycling10.1016/S0921-5093(00)00750-4 ↗
9. On the rumpling mechanism in nickel-aluminide coatings part I: an experimental assessment
10. Simulation of the effect of material properties and interface roughness on the stress distribution in thermal barrier coatings using finite element method10.1016/j.matdes.2009.08.005 ↗
11. Effect of interface undulations on the thermal fatigue of thin films and scales on metal substrates10.1016/S1359-6454(97)00062-1 ↗
12. Cyclic oxidation and rumpling behaviour of single phase β-(Ni,Pt)Al coatings with different thickness of initial Pt plating10.1016/j.corsci.2016.05.011 ↗
13. Influence of cooling rate and initial surface roughness on the residual stresses in chromia scales thermally grown on pure chromium10.1016/S0921-5093(00)02037-2 ↗
14. Rumpling of CVD (Ni,Pt)Al diffusion coatings under intermediate temperature cycling10.1016/j.surfcoat.2009.04.016 ↗
15. Test methods and data on the mechanical properties of protective oxide scales10.3184/096034001783640685 ↗
16. Development of a comprehensive oxide scale failure diagram10.1007/s11085-009-9185-7 ↗
17. Evidence of stress relaxation in thermally grown oxide layers—experiments and modelling10.1016/S0921-5093(98)00519-X ↗
18. Wrinkling behavior of alumina scales formed during isothermal oxidation of Fe-Al binary alloys10.1016/j.msea.2004.05.016 ↗
19. Investigations for the validation of the defect based scale failure diagrams—part I: nickel oxide10.1007/s11085-012-9317-3 ↗
20. Investigations for the validation of the defect based scale failure diagrams—part II: extension of the concept and application to nickel oxide, titanium oxide and Iron oxide10.1007/s11085-015-9540-9 ↗
21. Finite element simulation of residual stress and failure mechanism in plasma sprayed thermal barrier coatings using actual microstructure as the representative volume10.1016/j.surfcoat.2016.02.028 ↗
22. Modeling of thermal properties and failure of thermal barrier coatings with the use of finite element methods: a review10.1016/j.jeurceramsoc.2015.12.038 ↗
23. Measurement of residual stresses by X-ray diffraction in a NiNio system obtained by high temperature oxidation10.1016/0001-6160(88)90124-1 ↗
24. Oxidation and oxide spallation of heat resistant cast steels for superplastic forming dies10.1016/S0921-5093(01)01529-5 ↗
25. A mechanistic understanding on rumpling of a NiCoCrAlY bond coat for thermal barrier coating applications10.1016/j.actamat.2017.02.003 ↗
26. Evaluation of cyclic oxidation of thermal barrier coatings exposed to NaCl vapor by finite element method10.1016/j.msea.2008.01.050 ↗
27. Surface rumpling of a (Ni, Pt) Al Bond coat induced by cyclic oxidation10.1016/S1359-6454(00)00156-7 ↗
28. A study on the thermal cyclic behavior of thermal barrier coatings with different MCrAlY roughness10.1016/j.vacuum.2016.12.033 ↗
29. Thermal barrier coatings technology: critical review, progress update, remaining challenges and prospects10.1179/1743280413Y.0000000019 ↗
30. Mechanics-based scaling laws for the durability of thermal barrier coatings10.1016/S0079-6425(00)00007-4 ↗
31. Electrical and microstructural characterization of spinel phases as potential coatings for SOFC metallic interconnects10.1016/j.jpowsour.2005.03.137 ↗
32. Bhadeshia · 2002 · 3
33. Comparative study of the structures of Fe-Mn-Si-Cr-Ni shape memory alloys obtained by classical and by powder metallurgy, respectively
34. Failure analysis of a martensitic stainless steel (CA-15M) roll manufactured by centrifugal casting. Part II: thermal stress analysis by FEA10.1016/j.engfailanal.2014.11.001 ↗
35. Overview of residual stress after quenching part II: factors affecting quench residual stresses10.1504/IJMPT.2005.007942 ↗
36. Prediction of bulk tensile behavior of dual phase stainless steels using constituent behavior from micropillar compression experiments10.1016/j.msea.2011.11.062 ↗
37. Stress effects in high temperature oxidation of metals10.1179/imr.1995.40.1.1 ↗