Corrosion performance of feedstock modified – Additively manufactured stainless steel
Source abstract
Abstract
© 2022 Elsevier LtdFeedstock modified powders were produced by ball-milling commercial 316 L stainless steel powder and 1 wt% additive (Cerium oxide–CeO2, lanthanum (III) nitrate hexahydrate–La(NO3)30.6 H2O and chromium nitride–CrN). Laser-powder bed fusion (L-PBF) was performed on modified feedstock using 180, 200, and 220 W laser power. The influence of additives on microstructure and corrosion performance was investigated on the as-printed and ground/polished conditions of L-PBF-316 L-additive. The corrosion performance was dependent on the type of the additives. The microstructure of the alloys was correlated with the observed corrosion behavior.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (89)
Show source-provided references
1. Corrosion of metallic materials fabricated by selective laser melting10.1038/s41529-019-0086-1 ↗
2. Investigation of SLM process in terms of temperature distribution and melting pool size: Modeling and experimental approaches10.3390/ma12081272 ↗
3. Numerical mesoscale modelling of microstructure evolution during selective laser melting10.3390/met10060800 ↗
4. Melt pool temperature and cooling rates in laser powder bed fusion
5. Communication on the characterization of a hitherto unreported icosahedral quasicrystal phase in additively manufactured aluminum alloy AA7075
6. Exploring the possibility of a stainless steel and glass composite produced by additive manufacturing10.1016/j.matdes.2020.109179 ↗
7. Additive manufacturing of ultrafine-grained austenitic stainless steel matrix composite via vanadium carbide reinforcement addition and selective laser melting: Formation mechanism and strengthening effect10.1016/j.msea.2019.01.008 ↗
8. Review on corrosion performance of laser powder-bed fusion printed 316L stainless steel: Effect of processing parameters, manufacturing defects, post-processing, feedstock, and microstructure10.1016/j.matdes.2022.110874 ↗
9. Enhanced corrosion resistance of additively manufactured stainless steel by modification of feedstock10.1038/s41529-021-00215-z ↗
10. On the corrosion and metastable pitting characteristics of 316L stainless steel produced by selective laser melting10.1149/2.0551706jes ↗
11. On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel10.1016/j.scriptamat.2017.07.037 ↗
12. Hardened austenite steel with columnar sub-grain structure formed by laser melting10.1016/j.msea.2014.12.018 ↗
13. Two and three-dimensional characterisation of localised corrosion affected by lack-of-fusion pores in 316L stainless steel produced by selective laser melting10.1016/j.corsci.2019.108394 ↗
14. On the unusual intergranular corrosion resistance of 316L stainless steel additively manufactured by selective laser melting10.1016/j.corsci.2019.108189 ↗
15. Unexpected erosion-corrosion behaviour of 316L stainless steel produced by selective laser melting10.1016/j.corsci.2019.04.028 ↗
16. Influence of porosity and microstructure on mechanical and corrosion properties of a selectively laser melted stainless steel10.1016/j.jallcom.2020.154815 ↗
17. Sliding wear characteristics and corrosion behaviour of selective laser melted 316L stainless steel10.1007/s11665-013-0784-8 ↗
18. Oxide inclusions in laser additive manufactured stainless steel and their effects on impact toughness and stress corrosion cracking behavior10.1016/j.jnucmat.2017.11.036 ↗
19. Effect of laser powder bed fusion parameters on the microstructural evolution and hardness of 316L stainless steel10.1007/s00170-021-06818-9 ↗
20. On the effect of build orientation and residual stress on the corrosion of 316L stainless steel prepared by selective laser melting10.1016/j.corsci.2020.109149 ↗
21. Densification behavior of gas and water atomized 316L stainless steel powder during selective laser melting10.1016/j.apsusc.2010.02.030 ↗
22. A study on the residual stress during selective laser melting (SLM) of metallic powder10.1007/s00170-016-8466-y ↗
23. Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting10.1007/s00170-014-6297-2 ↗
24. Selective laser melting of stainless steel 316L with low porosity and high build rates10.1016/j.matdes.2016.05.035 ↗
25. In situ formation of TiC-particle-reinforced stainless steel matrix nanocomposites during ball milling: Feedstock powder preparation for selective laser melting at various energy densities10.1016/j.powtec.2017.11.064 ↗
26. Correlation between process parameters, microstructure and properties of 316 L stainless steel processed by selective laser melting10.1016/j.msea.2018.01.103 ↗
27. Investigation of effects of process parameters on microstructure and hardness of SLM manufactured SS316L10.1016/j.jallcom.2018.01.098 ↗
28. Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting10.1016/j.jnucmat.2015.12.034 ↗
29. Selective laser melting (SLM) of AISI 316L—impact of laser power, layer thickness, and hatch spacing on roughness, density, and microhardness at constant input energy density10.1007/s00170-020-05510-8 ↗
30. On the influence of laser defocusing in Selective Laser Melting of 316L
31. The effect of post-processing operations on surface characteristics of 316L stainless steel produced by selective laser melting
32. Surface finish and properties enhancement of selective laser melted 316L stainless steel by surface mechanical attrition treatment10.1016/j.surfcoat.2019.124993 ↗
33. Comparison of different post processing technologies for SLM generated 316l steel parts10.1108/13552541311312166 ↗
34. How build angle and post-processing impact roughness and corrosion of additively manufactured 316L stainless steel10.1038/s41529-020-00126-5 ↗
35. Strengthening of stainless steel by titanium carbide addition and grain refinement during selective laser melting10.1016/j.msea.2017.11.126 ↗
36. Selective laser melting of 316L stainless steel: influence of TiB2 addition on microstructure and mechanical properties
37. Densification behavior and mechanical properties of nanocrystalline TiC reinforced 316L stainless steel composite parts fabricated by selective laser melting10.1016/j.optlastec.2018.01.005 ↗
38. Novel TiB2-reinforced 316L stainless steel nanocomposites with excellent room- and high-temperature yield strength developed by additive manufacturing10.1016/j.compositesb.2018.07.050 ↗
39. Spark plasma sintering of a high-energy ball milled Mg-10 wt% Al alloy10.1016/j.jma.2020.02.006 ↗
40. Aluminum alloys with high elastic modulus10.1016/j.matlet.2022.132292 ↗
41. The influence of spark plasma sintering temperatures on the microstructure, hardness, and elastic modulus of the nanocrystalline Al-xV alloys produced by high-energy ball milling10.1016/j.jmst.2022.02.008 ↗
42. Effect of V content on corrosion behavior of high-energy ball milled AA508310.1016/j.corsci.2021.109465 ↗
43. Influence of TiN nanoparticle addition on microstructure and properties of Fe22Cr alloy fabricated by spark plasma sintering10.1007/s00170-019-03873-1 ↗
44. Laser additive manufacturing of oxide dispersion strengthened steels using laser-generated nanoparticle-metal composite powders10.1016/j.procir.2018.08.093 ↗
45. Synthesis and electrochemical characterization of porous niobium oxide coated 316L SS for orthopedic applications10.1016/j.matchemphys.2009.10.033 ↗
46. 3D printed carbon nanotube reinforced stainless steel via selective laser melting
47. Fabrication of 316L stainless steel with TiN addition by vacuum laser powder bed fusion10.1016/j.optlastec.2020.106116 ↗
48. In-situ formation of novel TiC-particle-reinforced 316L stainless steel bulk-form composites by selective laser melting10.1016/j.jallcom.2017.01.149 ↗
49. The effect of NiB additive on surface morphology and microstructure of 316L stainless steel single tracks and layers obtained by SLM10.1016/j.surfcoat.2016.09.019 ↗
50. Additive manufacturing of a 316L steel matrix composite reinforced with CeO2 particles: process optimization by adjusting the laser scanning speed10.3390/technologies6010025 ↗
51. Laser powder bed fusion additive manufacturing of oxide dispersion strengthened steel using gas atomized reaction synthesis powder10.1016/j.matdes.2022.110574 ↗
52. Characterization of nanoparticle mixed 316 L powder for additive manufacturing10.1016/j.jmst.2020.02.019 ↗
53. Selective laser melting of silver submicron powder modified 316L stainless steel: Influence of silver addition on microstructures and performances10.1016/j.powtec.2020.01.082 ↗
54. Effects of SiC content on phase evolution and corrosion behavior of SiC-reinforced 316L stainless steel matrix composites by laser melting deposition10.1016/j.optlastec.2019.02.029 ↗
55. Surface analysis of corrosion pits initiated at MnS inclusions in 304 stainless steel10.1149/1.2069458 ↗
56. Initiation of corrosion pits at inclusions on 304 stainless steel10.1149/1.2048462 ↗
57. The effect of YCl3 and LaCl3 additives on wear of 1045 and 304 steels in a dilute chloride solution10.1016/S0921-5093(02)00469-0 ↗
58. Aluminum containing Na2CrO4: Inhibitor release on demand10.1016/j.matlet.2017.06.080 ↗
59. Corrosion behavior of an in situ consolidated nanocrystalline Al-V alloy
60. Age-hardening behavior, corrosion mechanisms, and passive film structure of nanocrystalline Al-V supersaturated solid solution10.1016/j.jmst.2022.06.044 ↗
61. Rajeev K Gupta, Mohammad Umar Farooq Khan, Farhan Mirza, Javier Esquivel, Inhibitor-containing metal particles by mechanical alloying, USA Patent number 11414726, Application number 16295494 (2022).
62. Effects of cerium addition on solidification structure and mechanical properties of 434 ferritic stainless steel10.1016/S1002-0721(17)60942-6 ↗
63. Corrosion inhibition of aluminium by rare earth chlorides10.1016/j.matchemphys.2007.02.079 ↗
64. Improvement in the oxidation behavior of austenitic stainless steels by superficially applied, cerium oxide coatings10.1007/BF01196647 ↗
65. Lu · 1993
66. Synergistic inhibition of carbon steel corrosion in seawater by cerium chloride and sodium gluconate10.1016/j.corsci.2015.05.017 ↗
67. Effects of polyethylene glycol (PEG) on the corrosion inhibition of mild steel by cerium nitrate in chloride solution10.1016/j.apsusc.2018.12.164 ↗
68. Epoxy coatings modified with a new cerium phosphate inhibitor for smart corrosion protection of steel10.1016/j.corsci.2019.108128 ↗
69. The effect of CeCl3 inhibitor on the localized corrosion of stainless steel in chloride solutions10.1002/maco.201810509 ↗
70. Roles of lanthanum and cerium in grain refinement of steels during solidification10.3390/met8110884 ↗
71. A mechanistic study of the effects of nitrogen on the corrosion properties of stainless steels10.5006/1.3293567 ↗
72. Nitrogen significantly enhances corrosion resistance of 316L stainless steel in thiosulfate-chloride solution10.1016/j.corsci.2020.108792 ↗
73. Effect of nitrogen alloying on the semiconducting properties of passive films and metastable pitting susceptibility of 316L and 316LN stainless steels10.1016/j.matchemphys.2010.02.033 ↗
74. A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties10.1016/j.matdes.2018.02.018 ↗
75. The origin of high-density dislocations in additively manufactured metals10.1080/21663831.2020.1751739 ↗
76. Surface roughness and the metastable pitting of stainless steel in chloride solutions10.5006/1.3293603 ↗
77. Theoretical and experimental study on surface roughness of 316L stainless steel metal parts obtained through selective laser melting10.1108/RPJ-06-2015-0078 ↗
78. Corrosion of additively manufactured alloys: a review10.5006/2926 ↗
79. Influence of laser processing parameters on the surface characteristics of 316L stainless steel manufactured by selective laser melting10.1016/j.matpr.2019.12.061 ↗
80. Processing parameters in laser powder bed fusion metal additive manufacturing10.1016/j.matdes.2020.108762 ↗
81. ASTM E1019–11, Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques, ASTM Int. i (2011) 1–28. https://doi.org/10.1520/E1019–18.2.
82. S. Practices, Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic CLASSIFICATION OF ETCH STRUCTURES OF, (2015) 1–20. https://doi.org/10.1520/A0262–14.10.1520/A0262-14 ↗
83. Powder characterisation techniques and effects of powder characteristics on part properties in powder-bed fusion processes10.1080/17452759.2016.1250605 ↗
84. Evolution of 316L stainless steel feedstock due to laser powder bed fusion process
85. S. Luisa N. Contuzzi A. Angelastro A. Domenico Capabilities and Performances of the Selective Laser Melting Process New Trends Technol. Devices, Comput. Commun. Ind. Syst., Sciyo 2010 doi: 10.5772/10432.10.5772/10432 ↗
86. A study of thermal expansion coefficients and microstructure during selective laser melting of Invar 36 and stainless steel 316L
87. Metal vaporization and its influence during laser powder bed fusion process10.1016/j.matdes.2022.110505 ↗
88. Melt pool oxidation and reduction in powder bed fusion
89. Inclusion evolution in additive manufactured 316L stainless steel by laser metal deposition process10.1016/j.matdes.2018.06.001 ↗