Influence of substrate pre-treatments by Xe + ion bombardment and plasma nitriding on the behavior of TiN coatings deposited by plasma reactive sputtering on 100Cr6 steel
Source abstract
Abstract
Abstract In this paper the influence of pre-treating a 100Cr6 steel surface by Xe+ ion bombardment and plasma nitriding at low temperature (380 °C) on the roughness, wear resistance and residual stresses of thin TiN coatings deposited by reactive IBAD was investigated. The Xe+ ion bombardment was carried out using a 1.0 keV kinetic energy by a broad ion beam assistance deposition (IBAD, Kaufman cell). The results showed that in the studied experimental conditions the ion bombardment intensifies nitrogen diffusion by creating lattice imperfections, stress, and increasing roughness. In case of the combined pre-treatment with Xe+ ion bombardment and subsequent plasma nitriding, the samples evolved relatively high average roughness and the wear volume increased in comparison to the substrates exposed to only nitriding or ion bombardment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Ion-surface interactions and analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Structure and properties of plasma nitrided stainless steel10.1016/0257-8972(95)08246-8 ↗
2. Microstructure and corrosion resistance of plasma source ion nitrided austenitic stainless steel10.1116/1.580501 ↗
3. Low temperature nitriding of AISI 316L stainless steel and titanium in a low pressure arc discharge10.1016/S0257-8972(98)00722-1 ↗
4. Texture evolution of transition-metal nitride thin films by ion beam assisted deposition10.1016/j.tsf.2003.09.063 ↗
5. Wear mechanisms and microstructure of pulsed plasma nitrided AISI H13 tool steel10.1016/j.wear.2010.04.037 ↗
6. Nanosized precipitates in H13 tool steel low temperature plasma nitriding10.1016/j.surfcoat.2012.05.081 ↗
7. Nitriding of AISI 4140 steel by a low energy broad ion source10.1116/1.2356480 ↗
8. Effect of low temperature nitriding of 100Cr6 substrates on TiN coatings deposited by IBAD10.1590/1516-1439.266514 ↗
9. The effects of xenon bombardment on the dissolution and reprecipitation of carbonitrides produced in nitrogen-implanted low carbon steel10.1016/0257-8972(91)90231-K ↗
10. Investigations on the effects of plasma-assisted pre-treatment for plasma-assisted chemical vapour deposition TiN coatings on tool steel10.1016/j.tsf.2004.02.013 ↗
11. The composite of nitrided steel H13 and TiN coatings by plasma duplex treatment and the effect of pre-nitriding10.1016/S0257-8972(00)01073-2 ↗
12. Improvement of die-casting with duplex treatment10.1016/j.surfcoat.2003.10.119 ↗
13. Tribological behavior of TiN and TiAlN deposited on substrates plasma nitrided at low pressure10.1080/10426919508935025 ↗
14. Influence of plasma nitriding on mechanical and tribological properties of steel with subsequent PVD surface treatments10.1016/S0040-6090(97)00565-8 ↗
15. Plasma surface engineering of low alloy steel10.1016/0921-5093(91)90458-Y ↗
16. The role of cemented carbide functionally graded outer-layers on the wear performance of coated cutting tools10.1016/j.ijrmhm.2011.12.007 ↗
17. Enhanced corrosion resistance of duplex coatings10.1016/S0257-8972(96)03099-X ↗
18. Industrial feasibility of the nitrocoat process10.1016/j.surfcoat.2005.08.008 ↗
19. First results on duplex coatings without intermediate mechanical treatment10.1016/S0257-8972(03)00578-4 ↗
20. Structure, hardness and adhesion of thin coatings deposited by PVD, IBAD on nitrided steels10.1016/j.vacuum.2004.07.005 ↗
21. Influence of interfacial layer thickness and substrate roughness on adhesion of TiN coatings deposited at low temperatures by IBAD10.1142/S0218625X11014497 ↗
22. Influence of ion-beam bombardment on the physical properties of 100Cr6 steel10.1016/j.matchemphys.2014.04.016 ↗
23. Xe and Mo implantation on austenitic stainless steel: structural modification10.1016/j.surfcoat.2003.09.065 ↗
24. Pressure-induced physical changes of noble gases implanted in highly stressed amorphous carbon films10.1103/PhysRevB.68.054104 ↗
25. Influence of microstructure on the corrosion behavior of nitrocarburized AISI H13 tool steel obtained by pulsed DC plasma10.1016/j.surfcoat.2008.10.006 ↗
26. Effect of bombarding steel with Xe+ ions on the surface nanostructure and on pulsed plasma nitriding process
27. The effect of noble gas bombarding on nitrogen diffusion in steel10.1016/j.matchemphys.2013.08.027 ↗
28. Enhanced nitrogen diffusion induced by atomic attrition10.1063/1.2216032 ↗
29. Electronic structure of hydrogenated carbon nitride films10.1116/1.581443 ↗
30. A method for the non-destructive analysis of gradients of mechanical stresses by X-ray diffraction measurements at fixed penetration/information depths10.1107/S0021889806023417 ↗
31. Röntgenographische untersuchung von spannungszuständen in werkstofften
32. Depth dependence of elastic grain interaction and mechanical stress: analysis by x-ray diffraction measurements at fixed penetration/informationdepths10.1063/1.2363899 ↗
33. Influence of Xe ion-bombardment on the substrate microstructure and the residual stresses of TiN coatings deposited by plasma reactive sputtering onto AISI 4140 steel10.4028/www.scientific.net/AMR.996.841 ↗
34. The effect of temperature on plasma nitriding behaviour of DIN 1.6959 low alloy steel10.1016/j.vacuum.2006.03.010 ↗
35. Effect of the initial microstructure on the plasma nitriding behavior of AISI M2 high speed steel10.1016/j.surfcoat.2010.05.042 ↗
36. Characteristics of wear results tested by pin-on-disc at moderate to high speeds10.1016/0301-679X(95)00097-N ↗
37. Comparison of nanostructure and duplex PVD coatings deposited onto hot work tool steel substrate
38. A simple model for the formation of compressive stress in thin films by ion bombardment10.1016/0040-6090(93)90201-Y ↗
39. Birkholz · 2006
40. Stress determination in coatings
41. Residual stress measurement in textured thin film by grazing-incidence x-ray diffraction10.1016/S0040-6090(02)00680-6 ↗
42. Hardness and residual stresses in TiN-Ni nanocomposite coatings deposited by reactive dual ion beam sputtering
43. Totten · 2004