The reliability of metastable pit sizes estimated from dissolution current in aluminium alloys
Source abstract
Abstract
Abstract By treating each current transient as a signal arising from single discrete pit events, the pit sizes of the locations associated with recurring and co-occurring pit events could be underestimated or overestimated. In the present study, the error introduced in the estimated pit sizes by this hypothesis and other factors such as the hydrogen evolution occurring within pits and pit geometry were investigated in-situ by mapping the pit locations. Further, with the insights derived, a criterion was proposed to identify the transients associated with recursive pit events that eventually developed into stable pits.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Non-Destructive Testing Techniques · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Sequence of steps in the pitting of aluminum by chloride ions10.1016/S0010-938X(02)00231-7 ↗
2. Passivity breakdown, pit initiation and propagation of pits in metallic materials – Review10.1016/j.corsci.2014.10.006 ↗
3. Electrochemical Characteristics of Intermetallic Phases in Aluminum Alloys: An Experimental Survey and Discussion10.1149/1.1869984 ↗
4. Pitting Corrosion of Metals: A Review of the Critical Factors10.1149/1.1838615 ↗
5. Metastable pitting corrosion of stainless steel and the transition to stability10.1098/rsta.1992.0114 ↗
6. Cavanaugh · 2009
7. A quantitative study on the effects of environment and microstructure on pit initiation in Al-alloys10.1149/1.3229951 ↗
8. Metastable pitting characteristics of aluminium alloys measured using current transients during potentiostatic polarisation10.1016/j.electacta.2012.01.090 ↗
9. Stochastic Models of Pitting Corrosion of Stainless Steels: I. Modelling of the Initiation and Growth of Pits at Constant Potential10.1149/1.2114220 ↗
10. Stochastic Models of Pitting Corrosion of Stainless Steels: II. Measurement and Interpretation of Data at Constant Potential10.1149/1.2114221 ↗
11. Stochastic Approach to the Initiation of Pitting Corrosion10.4028/www.scientific.net/MSF.44-45.299 ↗
12. A characterisation of the inhibiting effect of Cu on metastable pitting in dilute Al–Cu solid solution alloys10.1016/j.electacta.2006.08.054 ↗
13. Mechanism of Activation of Aluminum by Low Melting Point Elements: Part 1 Effect of Zinc on Activation of Aluminum in Metastable Pitting10.5006/1.3284817 ↗
14. Metastable Pitting of Stainless Steel10.5006/1.3583880 ↗
15. The localised breakdown and repair of passive surfaces during pitting10.1016/0010-938X(89)90038-3 ↗
16. The nucleation, growth and stability of micropits in stainless steel10.1016/0010-938X(94)90145-7 ↗
17. Metastable Pitting of Aluminum and Criteria for the Transition to Stable Pit Growth10.1149/1.2059275 ↗
18. Nucleation of corrosion pits on stainless steel10.1080/09500839208229274 ↗
19. Scully · 1996
20. Transport processes in passivity breakdown—II. Full hydrolysis of the metal ions10.1016/0010-938X(81)90009-3 ↗
21. Transport Processes and the Mechanism of Pitting of Metals10.1149/1.2132857 ↗
22. Determining the probability of stable pit initiation on aluminium alloys using potentiostatic electrochemical measurements10.1016/j.corsci.2004.09.021 ↗
23. Growth of Corrosion Pits on Pure Aluminum in 1M NaCl10.1149/1.2044137 ↗
24. Prediction of Fatigue Crack Initiation Life Based on Pit Growth10.5006/1.3577891 ↗
25. Salt film formation during corrosion of aluminum10.1016/0013-4686(84)87098-X ↗
26. Characteristics of the random transients caused by clustered pitting corrosion for Al–Mg microelectrode10.1002/maco.201911048 ↗
27. Detection and analysis of anodic current transients associated with nanoscale β-phase precipitates on an Al–Mg microelectrode10.1016/j.corsci.2015.03.001 ↗
28. Influence of aging treatment on the pitting behavior associated with the dissolution of active nanoscale β-phase precipitates for an Al–Mg alloy10.1016/j.corsci.2015.11.026 ↗
29. The reliability of electrochemical noise and current transients characterising metastable pitting of Al–Mg–Si microelectrodes10.1016/j.corsci.2013.11.008 ↗
30. Quantitative evaluation of pit sizes for high strength steel: Electrochemical noise, 3-D measurement, and image-recognition-based statistical analysis10.1016/j.matdes.2016.01.016 ↗
31. Repetitive Nucleation of Corrosion Pits on Stainless Steel and the Effects of Surface Roughness10.1149/1.1416503 ↗
32. Origins of Electrochemical Noise during Pitting Corrosion of Aluminum10.1149/1.1641040 ↗
33. Untersuchungen über die gleichmä§ige Auflösung und den Lochfra§ von Aluminiumelektroden*10.1524/zpch.1962.34.1_4.087 ↗
34. Analysis of the Gases Evolved during the Pitting Corrosion of Aluminum in Various Electrolytes10.1149/1.2129511 ↗
35. Direct visualisation of β phase causing intergranular forms of corrosion in Al–Mg alloys10.1016/j.matchar.2013.03.014 ↗
36. Measurements of the growth of electrolytic bubbles10.1016/0017-9310(64)90130-9 ↗
37. Sridhar · 2021
38. On the Stability of Gas Bubbles in Liquid‐Gas Solutions10.1063/1.1747520 ↗
39. Corrosion rates and negative difference effects for Al and some Al alloys10.1023/A:1003447018115 ↗
40. Transfer of mass or heat to an electrode in the region of hydrogen evolution—I theory10.1016/0013-4686(75)90007-9 ↗
41. On the in-situ characterisation of metastable pitting using 316L stainless steel as a case study10.1016/j.corsci.2020.109004 ↗
42. Initiation events for pitting corrosion of stainless steel?10.1016/0010-938X(91)90050-Y ↗
43. Combined anodic/cathodic transient currents within nucleating pits on Al–Fe alloy surfaces10.1016/j.corsci.2010.11.008 ↗
44. The remarkable passivity of metals and the origins of its breakdown
45. Localised dissolution kinetics, salt films and pitting potentials10.1016/S0010-938X(97)00049-8 ↗
46. Burstein · 1995 · 1
47. The Mechanism of Blister Formation and Rupture in the Pitting of Ion-Implanted Aluminum10.1149/1.2096613 ↗
48. Kaesche · 1990 · 153
49. Electrochemical Noise during Pitting Corrosion of Aluminum in Chloride Environments10.1149/1.1486822 ↗
50. Local chemistry considerations in the tunnelling corrosion of aluminium10.1016/0010-938X(94)00163-Z ↗
51. Pit Propagation in Pure Aluminum Investigated via the 1D Artificial Pit Technique: Growth Regimes, Surface Morphology and Implications for Stability Criteria10.1149/1.3697583 ↗
52. 2000 W.R. Whitney Award Lecture: Visualizing Corrosion10.5006/1.3294386 ↗
53. Electrochemical and microscopical study of pitting corrosion of austenitic stainless steel
54. Sudden Onset of Pitting Corrosion on Stainless Steel as a Critical Phenomenon10.1126/science.1101358 ↗
55. Analysis of the Influence of Hydrogen on Pitting Corrosion and Stress Corrosion of Austenitic Stainless Steel in Chloride Environment10.5006/0010-9312-30.2.47 ↗
56. The Mechanism of Hydrogen Evolution During Anodic Polarization of Aluminium10.1016/j.electacta.2015.08.076 ↗
57. Spectral analysis of electrochemical noise with different transient shapes10.1016/S0013-4686(99)00406-5 ↗
58. Noise Analysis Applied to Electrochemical Systems10.5006/1.3293585 ↗
59. The growth of 2-D pits in thin film aluminum10.1016/0010-938X(90)90199-F ↗