Oxidation and corrosion protection of ZG12Cr9Mo1Co1NiVNbNB (CB2) ferritic stainless steel by inorganic composite coatings at 650 °C
Source abstract
Abstract
Abstract Inorganic silicate composite coatings were developed to inhibit the oxidation and corrosion of ZG12Cr9Mo1Co1NiVNbNB (CB2) stainless steel in air and water vapor containing environment at 650 °C. The results indicated that water vapor accelerates greatly the oxidation and corrosion of CB2 steel by transforming the protective Cr2O3 scales into non-protective multilayered scales. The excellent inhibition action of the coatings was attributed to barrier effect accompanying with the consumption of O2 and water by NiCrAlY powders. The Cr-rich oxide layer grew at the interface of the coatings and substrate steel retards the outwards diffusion of Fe and Cr.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. A global perspective on coal-fired power plants and burden of lung cancer10.1186/s12940-019-0448-8 ↗
2. A new conceptual cold-end design of boilers for coal-fired power plants with waste heat recovery10.1016/j.enconman.2014.09.065 ↗
3. Full chain energy performance for a combined cooling, heating and power system running with methanol and solar energy10.1016/j.apenergy.2012.11.018 ↗
4. Research status of nuclear power: a review10.1016/j.rser.2018.03.044 ↗
5. Review of the coal-fired, over-supercritical and ultra-dupercritical steam power plants10.1134/S0040601517020082 ↗
6. High-efficiency coal-fired power plants development and perspectives10.1016/j.energy.2005.05.025 ↗
7. Boiler materials for ultra-supercritical coal power plants-steamside oxidation10.1361/105994906X108756 ↗
8. Continuous and cyclic oxidation of T91 ferritic steel under steam10.1016/S0010-938X(03)00173-2 ↗
9. Mixed oxidant high temperature corrosion in gasifiers and power plants10.1080/09603409.1997.11689534 ↗
10. Increasing the upper temperature oxidation limit of alumina forming austenitic stainless steels in air with water vapor10.1007/s11085-011-9237-7 ↗
11. Early oxidation mechanism of austenitic stainless steel TP347H in supercritical water10.1016/j.corsci.2017.09.023 ↗
12. Corrosion behaviour 310 stainless steel in superheated steam10.1007/s11085-015-9591-y ↗
13. Microstructural evolution and the effect on hardness and plasticity of S31042 heat-resistant steel during creep10.1016/j.msea.2014.04.073 ↗
14. Steam oxidation of TP347HFG, super 304H and HR3C - analysis of significance of steam flowrate and specimen surface finish10.1179/1743278214Y.0000000222 ↗
15. Oxidation of 310 steel in H2O/O2 mixtures at 600°C: the effect of water-vapour-enhanced chromium evaporation10.1016/S0010-938X(02)00056-2 ↗
16. Effect of grain refinement on the resistance of 304 stainless steel to breakaway oxidation in wet air10.1016/j.actamat.2005.07.019 ↗
17. A general strategy for the ultrafast surface modification of metals10.1038/ncomms13797 ↗
18. Evaporation of Cr2O3 in atmospheres containing H2O10.1023/A:1023671206976 ↗
19. Hot deformation characteristics and processing map analysis of a new designed nickel-based alloy for 700°C A-USC power plant10.1016/j.jallcom.2015.09.219 ↗
20. Effect of ageing on creep behaviour of IN 617 nickel base super alloy for advanced USC power plant applications10.1007/s12666-015-0772-9 ↗
21. Steam oxidation resistance of two-layered Ni-Cr and Al APS coating for USC boiler applications10.1016/j.corsci.2004.06.023 ↗
22. Steam oxidation resistance of thermal sprayed coatings for USC boiler applications10.1179/174329405X50109 ↗
23. High-temperature oxidation of HVOF thermally sprayed NiCr-Cr3C2 coatings: microstructure and kinetics10.1007/s10853-015-9238-z ↗
24. Anticorrosive coatings: a review10.1007/s11998-008-9144-2 ↗
25. Predictive power for life and residual life of the zinc rich primer coatings with electrical measurement10.1016/j.porgcoat.2006.08.015 ↗
26. Complete corrosion inhibition of lamellar zinc pigment in aqueous alkaline media10.1016/S0010-938X(02)00103-8 ↗
27. Ethyl silicate binders for high performance coatings10.1016/S0300-9440(01)00128-X ↗
28. Microstructure and oxidation behavior of a SiC-Al2O3-glass composite coating on Ti-47Al-2Cr-2Nb alloy10.1016/j.corsci.2014.06.015 ↗
29. Oxidation inhibition of γ-TiAl alloy at 900°C by inorganic silicate composite coatings10.1016/j.corsci.2013.07.001 ↗
30. Metallography of CB2 steel used for cast turbine components10.4028/www.scientific.net/MSF.782.179 ↗
31. Ageing effects on microstructure, mechanical properties, and fracture behaviour of 9Cr-1.5Mo-1Co-VNbBN martensitic steel welded joint for high temperature application
32. Enhanced oxidation and corrosion inhibition of 1Cr11Ni2W2MoV stainless steel by nano-modified silicone-based composite coatings at 600°C10.1016/j.corsci.2020.108599 ↗
33. Application of infrared spectroscopy and chemometric methods to identification of selected minerals
34. Role of Al in depolymerized, peralkaline aluminosilicate melts in the systems Li2O-Al2O3-SiO2, Na2O-Al2O3-SiO2, and K2O-Al2O3-SiO2
35. Influence of MgO and Al2O3 contents on viscosity of blast furnace type slags containing FeO10.2355/isijinternational.44.1291 ↗
36. Novel approach to link between viscosity and structure of silicate melts via Darken’s excess stability function: focus on the amphoteric behavior of alumina10.1007/s11663-007-9122-6 ↗
37. Coal fly ash as raw material for the manufacture of geopolymer-based products10.1016/j.wasman.2007.02.001 ↗
38. Flake alignment in composite coatings10.1016/j.memsci.2003.09.022 ↗
39. Comprehensive study of the hydration and dehydration reactions of carbon dioxide in aqueous solution10.1021/jp909019u ↗
40. Phase evolution on heat treatment of sodium silicate water glass10.1016/j.jnoncrysol.2007.08.037 ↗
41. Stability and proton conductivity of AlH2P3O10·nH2O under various water vapor pressure10.2109/jcersj.111.323 ↗
42. Early oxidation mechanism of austenitic stainless steel TP347H in supercritical water10.1016/j.corsci.2017.09.023 ↗
43. Enhanced oxidation of the 9%Cr steel P91 in water vapour containing environments10.1016/j.corsci.2006.02.002 ↗
44. Representation of mixed reactive gases on free energy (Ellingham-Richardson) diagrams10.1007/BF02915078 ↗
45. Observations on the Fe-Cr-O system10.1149/1.2427643 ↗
46. Oxidation kinetics, breakaway oxidation, and inversion phenomenon in 9Cr-1Mo steels10.1007/BF00659183 ↗
47. Microstructural investigation of the breakdown of the protective oxide scale on a 304 steel in the presence of oxygen and water vapor at 600°C10.1016/j.corsci.2005.08.012 ↗
48. Parameters determining the breakaway oxidation behaviour of ferritic martensitic 9%Cr steels in environments containing H2O10.1179/147842204225016921 ↗
49. Oxidation of Fe-10Cr in O2 and in O2 + H2O environment at 600°C: a microstructural investigation10.1016/j.corsci.2013.06.016 ↗
50. Water vapour effects on Fe-Cr alloy oxidation10.1007/s11085-009-9183-9 ↗
51. Theoretical and experimental investigation of the thermochemistry of CrO2(OH)2(g)10.1021/jp0647380 ↗
52. Microstructural investigation of the breakdown of the protective oxide scale on a 304 steel in the presence of oxygen and water vapour at 600°C10.1016/j.corsci.2005.08.012 ↗
53. The effects of MoSi on the oxidation behavior of carbon/carbon composites10.1016/S0008-6223(00)00248-7 ↗
54. The effect of thermal annealing on aerosol-gel deposited SiO2 films: a FTIR deconvolution study10.1016/S0040-6090(97)00340-4 ↗
55. The influence of alloying elements on the development and maintenance of protective scales10.1007/BF01046725 ↗
56. Predicting oxide stability in high-temperature water vapor10.1007/s11837-006-0063-3 ↗
57. Influence of KCl and HCl on high temperature corrosion of HVAF-sprayed NiCrAlY and NiCrMo coatings10.1016/j.matdes.2018.03.048 ↗
58. Effect of water vapor on the oxidation behavior of HVAF-sprayed NiCr and NiCrAlY coatings10.1002/maco.201710005 ↗
59. High temperature oxidation and corrosion behaviours of Ni-Fe-Cr alloys as inert anode for aluminum electrolysis10.1016/j.corsci.2019.06.020 ↗
60. Effects of grit blasting and annealing on the high-temperature oxidation behavior of austenitic and ferritic Fe-Cr alloys10.1007/s11665-014-1073-x ↗
61. Effects of cerium and manganese on corrosion of Fe-Cr and Fe-Cr-Ni alloys in Ar-20CO2 and Ar-20CO2-20H2O gases at 650 °C10.1016/j.corsci.2015.08.012 ↗
62. The oxidation of industrial FeCrMo steel10.1016/S0010-938X(00)00026-3 ↗
63. Precipitation behavior of laves phase in the vicinity of oxide film of ferritic stainless steel: selective oxidation‑induced precipitation10.1007/s11085-019-09955-5 ↗
64. Improvement of oxidation resistance of 9 mass% chromium steel for advanced-ultra supercritical power plant boilers by pre-oxidation treatment10.1016/j.corsci.2016.10.008 ↗
65. Optimization of the thermodynamic properties and Phase diagrams of the Na2O-SiO2 and K2O-SiO2 systems10.1111/j.1151-2916.1993.tb08333.x ↗
66. Thermal growth of exclusive alumina scale on a TiAl based alloy: shot peening effect10.1016/j.corsci.2018.08.024 ↗
67. Effect of shot peening on the oxidation resistance of TP304H and HR3C steels in water vapor10.1007/s11085-011-9270-6 ↗