Controlled synthesis of ordered mesoporous TiO2-supported on activated carbon and pore-pore synergistic photocatalytic performance
Source abstract
Abstract
Abstract Ordered mesoporous titania/activated carbon (OMTAC) were prepared by the template technique with the aid of an ultrasonic method. To explore the relationship between the structure and properties of OMTAC, the ultrasonic-sol-gel technique was applied to synthesize titania dioxide/activated carbon (USTAC). The obtained material structure was characterized by X-ray diffraction (XRD), nitrogen adsorption – desorption, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV diffuse reflectance (DRS) and Photoluminescence (PL) emission spectra. OMTAC photocatalytic performance was evaluated by means of acid red B (ARB) degradation. The pore-pore synergistic amplification mechanism of photocatalysis was proposed and the effects of catalytic conditions on synergistic amplification were explored. The results show that compared to OMT, OMTAC has a small particle size, low electron-hole recombination rate and high surface areas, due to the hindering effect of activated carbon on crystalline grain growth and an ordered mesoporous structure of titania. OMTAC has higher catalytic activity than USTAC, OMT and P25, due to pore-pore synergistic amplification effect of photocatalysis. The OMT content is strongly affected OMTAC photocatalytic activity, and OMTAC-3 (loading 3 times of OMT on AC) has the highest photocatalytic activity due to high hydroxyl concentration, surface area and low electron-hole recombination rate. When ARB is degraded by OMTAC-3, the optimum catalytic conditions are a catalyst concentration of 1 g/L, an ARB concentration of 15 mg/L and a pH of 5.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Photocatalysis Techniques · TiO2 Photocatalysis and Solar Cells · Mesoporous Materials and Catalysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Photocatalytic oxidation of organics in water using pure and silver-modified titanium dioxide particles10.1016/S1010-6030(02)00049-7 ↗
2. Photocatalytic degradation of the cyanotoxin cylindrospermopsin, using titanium dioxide and UV irradiation10.1016/S0043-1354(00)00372-9 ↗
3. Noble metal-modified TiO2 thin film photocatalyst on porous steel fiber support10.1016/j.apcatb.2010.01.014 ↗
4. Catalytic coatings for structured supports and reactors: VOx/TiO2 catalyst coated on stainless steel in the oxidative dehydrogenation of propane10.1016/j.apcata.2010.09.002 ↗
5. Photocatalytic reduction of CO2 with H2O on mesoporous silica supported Cu/TiO2 catalysts10.1016/j.apcatb.2010.08.015 ↗
6. A study on the synergistic adsorptive and photocatalytic activities of TiO2−xNx/Beta composite catalysts under visible light irradiation10.1016/j.cej.2010.08.057 ↗
7. Dimethyl ether synthesis via CO2 hydrogenation over CuO–TiO2–ZrO2/HZSM-5 bifunctional catalysts10.1016/j.catcom.2009.02.001 ↗
8. Study of the selective catalytic reduction of NOx on an efficient Fe/HBEA zeolite catalyst for heavy duty diesel engines10.1016/j.apcatb.2009.06.031 ↗
9. Preparation of cerium-doped TiO2 film on 304 stainless steel and its bactericidal effect in the presence of sulfate-reducing bacteria (SRB)10.1016/j.matchemphys.2010.07.063 ↗
10. Preparation and photocatalytic properties of visible light responsive N-doped TiO2/rectorite composites10.1016/j.micromeso.2010.08.009 ↗
11. Efficient adsorption and photocatalytic degradation of organic pollutants diluted in water using the fluoride-modified hydrophobic titanium oxide photocatalysts: Ti-containing Beta zeolite and TiO2 loaded on HMS mesoporous silica10.1016/j.cattod.2007.06.018 ↗
12. Anatase–rutile transformation in TiO2–V2O5 catalyst coatings for ceramic foams10.1016/j.jeurceramsoc.2008.12.007 ↗
13. Significant photocatalytic enhancement in methylene blue degradation of TiO2 photocatalysts via graphene-like carbon in situ hybridization10.1016/j.apcatb.2010.07.028 ↗
14. Decontamination of textile wastewater via TiO2/activated carbon composite materials10.1016/j.cis.2010.06.002 ↗
15. Immobilization of TiO2 nanoparticles on activated carbon fiber and its photodegradation performance for organic pollutants10.1016/j.partic.2010.03.013 ↗
16. Continuous reduction of toluene vapours from the contaminated gas stream in a fluidised bed photoreactor10.1016/j.powtec.2009.05.010 ↗
17. Effect of aqueous matrix species on synergistic removal of bisphenol-A under solar irradiation using nitrogen-doped TiO2/AC composite10.1016/j.apcatb.2010.11.013 ↗
18. Photoactivities of the visible-light-activated mixed-phase carbon-containing titanium dioxide: the effect of carbon incorporation10.1016/j.apcatb.2007.09.046 ↗
19. Effects of adsorbents used as supports for titanium dioxide loading on photocatalytic degradation of propyzamide10.1021/es950483k ↗
20. Hexagonal mesoporous germanium10.1126/science.1130101 ↗
21. Ordered mesoporous molecular sieves synthesized by a liquid-crystal template mechanism10.1038/359710a0 ↗
22. Photocatalytic degradation of methyl orange by TiO2-coated activated carbon and kinetic study10.1016/j.watres.2005.12.042 ↗
23. Well-ordered large-pore mesoporous anatase TiO2 with remarkably high Thermal stability and improved crystallinity: preparation, characterization, and photocatalytic performance10.1002/adfm.201002535 ↗
24. Thermal stability and optimal photoinduced hydrophilicity of mesoporous TiO2 thin films10.1021/jp211995t ↗
25. Nanoscale materials in chemistry: environmental applications10.1021/bk-2010-1045.ch006 ↗
26. Removal of acid red and sodium chloride mixtures from aqueous solutions using nanofiltration10.1016/j.desal.2006.03.575 ↗
27. Anatase TiO2 mesocrystals enclosed by (001) and (101) facets: synergistic effects between Ti3+ and facets for their photocatalytic performance10.1002/chem.201201178 ↗