journal article·2020-10

Study on mechanical characteristics, microstructure and equation of copper powder compaction based on electromagnetic compaction

Dongying Dong, Xushi Huang, Guangyao Li, Junjia Cui

Publisher page

Abstract

Abstract Electromagnetic powder compaction technology had the advantages of high efficiency and strong impact during the powder forming. The mechanical characteristics of copper powder compaction were investigated through digital image correlation technology under different discharge energies. The microstructure was analyzed by the metallography and electron microscopy. The results showed that the force-displacement curves had a bimodal tendency during the compaction of copper powders. The compaction force and velocity of copper powders gradually increased with the increase of discharge energy. The microstructure distribution of copper compacts was more and more dense as the discharge energy increased. However, the microstructure distribution of the axial direction of compact center was not much different overall at the same discharge energy. There was a tendency that the microhardness values at the center of the upper end faces were gradually larger than that of the lower end faces. The electromagnetic compaction equation of copper powders was established by Gaussian fitting. It had been verified that the error between the predicted and actual values of equation was only 0.47%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Powder metallurgical processing of a 2xxx series aluminum powder metallurgy metal alloy reinforced with AlN particulate additions10.1016/j.msea.2019.03.122 ↗
2. Preparation and mechanical properties of particulate reinforced powder metallurgy titanium matrix composites10.1007/s11661-007-9329-9 ↗
3. Effect of graphene nanoplatelets addition on mechanical properties of pure aluminum using a semi-powder method10.1016/j.pnsc.2014.03.012 ↗
4. Effects of graphene content on the microstructure and properties of copper matrix composites10.1016/j.carbon.2015.10.023 ↗
5. Preparation of graphene nanoplatelets-copper composites by a modified semi-powder method and their mechanical properties10.1016/j.jallcom.2015.10.252 ↗
6. Ultra-high strengthening efficiency of graphene nanoplatelets reinforced magnesium matrix composites10.1016/j.msea.2017.11.040 ↗
7. High entropy alloys obtained by field assisted powder metallurgy route: SPS and microwave heating10.1016/j.matchemphys.2017.06.065 ↗
8. Additive manufacturing of high-strength CrMnFeCoNi-based high entropy alloys with TiC addition10.1016/j.intermet.2019.04.005 ↗
9. On the rejuvenation of crept Ni-Base single crystal superalloys (SX) by hot isostatic pressing (HIP)10.1016/j.msea.2019.04.078 ↗
10. The outstanding tensile strength of Ni-rich high entropy superalloy fabricated by powder metallurgical process10.1016/j.matchemphys.2019.121749 ↗
11. Sequential deposition of copper/alumina composites10.1007/s10853-005-2704-2 ↗
12. Effects of boronmodifications on phase nucleation and dissolution temperatures andmechanical properties in 9%Cr steels: alloy design10.1088/2053-1591/ab6db7 ↗
13. Effects of prior austenite grain size on impression creep and microstructure in simulated heat affected zones of boron modified P91 steels10.1016/j.matchemphys.2020.122847 ↗
14. Influence of electromagnetic riveting process on microstructures and mechanical properties of 2A10 and 6082 Al riveted structures10.1016/j.acme.2019.07.006 ↗
15. Effect of multiple pressures by magnetic pulsed compaction (MPC) on the density of gas-atomized Al–20Si powder10.1016/j.powtec.2012.03.020 ↗
16. Consolidation of WC–Co alloys by magnetic pulsed compaction and evaluation of their mechanical properties10.1016/j.powtec.2012.11.032 ↗
17. Nanostructures and mechanical properties of copper compacts prepared by magnetic pulsed compaction method10.1016/j.msea.2003.10.100 ↗
18. Magnetic pulsed compaction of ferromagnetic nano-powders for soft-magnetic core10.1016/j.msea.2006.02.401 ↗
19. Microstructure and mechanical properties of Ti6Al4V powder compacts prepared by magnetic pulse compaction10.1016/S1003-6326(09)60177-1 ↗
20. Evaluation of mechanical properties and processing conditions of WC Co alloys fabricated by magnetic pulsed compaction10.1016/j.jallcom.2011.12.108 ↗
21. Microstructure and mechanical properties of rapidly solidified Mg alloy powders compacted by magnetic pulsed compaction (MPC) method10.1016/j.jallcom.2011.01.163 ↗
22. Thermoelectric properties of n-type 95%Bi2Te3e5%Bi2Se3 materials fabricated by magnetic pulsed compaction (MPC)10.1016/j.intermet.2012.09.007 ↗
23. Densification behaviour analysis of ZrO2 nanopowders for dental applications compacted by magnetic pulsed compaction10.1016/j.matchemphys.2013.04.046 ↗
24. Sliding wear resistance of fine Co powders compacted by the magnetic-pulsed compaction method10.1016/j.wear.2013.08.009 ↗
25. Microstructural and mechanical characteristics of in situ metal matrix composites10.1016/S0927-796X(00)00024-3 ↗
26. Systematic study of microwave absorption, heating, and microstructure evolution of porous copper powder metal compacts10.1063/1.2713087 ↗
27. Microwave heating of pure copper powder with varying particle size and porosity
28. Effect of porosity and particle size on microwave heating of copper10.2298/SOS1002169M ↗
29. Li · 2011
30. A study of a new phenomenological compacting equation10.1016/S0032-5910(00)00207-2 ↗
31. Some considerations on powder compression equations10.1016/0032-5910(71)80001-3 ↗
32. Huang · 1997