The effect of surface treatment on the corrosion behavior of pure Ta sheet in an equimolar NaCl-KCl melt at 850℃ in air, part 2: Diamond film, TaC film, Ta-Si coating and Ta-Si-Al coating
Source abstract
Abstract
Abstract The diamond film, TaC film, Ta-Si coating and Ta-Si-Al coating were developed on Ta sheet surface and their corrosion behavior were investigated in an equimolar NaCl-KCl melt at 850℃ in air, additionally, their corrosion behavior were concluded. The diamond film could prevent the corrosion mediums at beginning, while had no benefit in later period due to the corrosion product CO2 having no protective ability. The TaC film has good corrosion resistance mainly because of its low activity. The corrosion of Ta-Si and Ta-Si-Al coating could form continuous SiO2 amorphous film on surface to protect the un-corroded material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · High-Temperature Coating Behaviors · Advancements in Solid Oxide Fuel Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Electrochemical and spectrophotometric study on trivalent neodymium ion in molten binary mixtures of LiCl and alkali earth chlorides10.1016/j.jnucmat.2011.04.002 ↗
2. Redox electrochemistry of europium fluoride complexes in an equimolar NaCl–KCl melt10.1016/j.jnucmat.2011.01.118 ↗
3. Plutonium chemical properties in NaCl–KCl and CaCl2 at 1073K10.1016/j.jnucmat.2005.01.010 ↗
4. Activity coefficients of plutonium and cerium in liquid gallium at 1073K: application to a molten salt/solvent metal separation concept10.1016/j.jnucmat.2005.01.009 ↗
5. On the electrochemical formation of Pu–Al alloys in molten LiCl–KCl10.1016/j.jnucmat.2011.09.017 ↗
6. Acid corrosion resistance of tantalum, columbium, zirconium, and titanium10.1021/ie50484a023 ↗
7. Kinetics of Tantalum Corrosion in Aqueous Electrolytes, II
8. Phosphoric acid passivated niobium and tantalum eis-comparative study10.1016/0013-4686(95)00123-V ↗
9. Corrosion behavior of niobium, tantalum and their alloys in boiling sulfuric acid solutions10.1016/S0263-4368(97)87506-3 ↗
10. Corrosion behavior of niobium, tantalum and their alloys in hot hydrochloric and phosphoric acid solutions10.1016/S0263-4368(99)00034-7 ↗
11. Corrosion behaviour of tantalum in sodium hydroxide solutions10.1023/A:1022982320438 ↗
12. Electrochemical behavior of tantalum in anhydrous ethanol10.1149/1.3288555 ↗
13. Development of multilayer oxidation resistant coatings on niobium and tantalum10.1016/j.surfcoat.2005.01.034 ↗
14. Flux growth of single-crystal Na2Ta4O11 particles and their photocatalytic hydrogen production10.1021/cg301859d ↗
15. Flux-mediated crystal growth of metal oxides: synthetic tunability of particle morphologies, sizes, and surface features for photocatalysis research10.1039/C4CE01587H ↗
16. Growth of well-developed sodium tantalate crystals from a sodium chloride flux10.1039/b921092j ↗
17. Direct fabrication and nitridation of a high-quality NaTaO3 crystal layer onto a tantalum substrate10.1039/c2ce25901j ↗
18. Gas phase generation of diamond nanoparticles in the hot filament chemical vapor deposition reactor10.1016/j.carbon.2016.05.035 ↗
19. Modeling of gas flow and deposition profile in HWCVD processes10.1016/j.tsf.2015.08.004 ↗
20. Structural characteristics and formation mechanisms of crack-free multilayer TaC/SiC coatings on carbon-carbon composites10.1016/S1003-6326(08)60045-X ↗
21. Ablation behaviors of carbon/carbon composites with C-SiC-TaC multi-interlayers10.1016/j.apsusc.2009.07.006 ↗
22. Influence of plasma spraying parameters on the carbon content and porosity of TaC coatings10.1016/0257-8972(95)02430-1 ↗
23. Femtosecond pulsed laser ablation deposition of tantalum carbide10.1016/j.apsusc.2007.07.178 ↗
24. Tantalum carbide films synthesized by hot-filament chemical vapor deposition technique10.1016/j.surfcoat.2011.12.002 ↗
25. Design of low-friction PVD coating systems with enhanced running-in performance — carbon overcoats on TaC/aC coatings10.1016/j.surfcoat.2013.02.003 ↗
26. High temperature interaction of Al/Si-modified Fe-Cr alloys with KCl10.1016/j.corsci.2006.10.019 ↗
27. Models describing the degradation of FeAl and NiAl alloys induced by ZnCl 2 –KCl melt at 400–450 °C10.1016/j.corsci.2003.10.019 ↗
28. Effect of Al/Si addition on KCl induced corrosion of 9% Cr steel10.1016/j.matlet.2004.06.068 ↗
29. Corrosion behaviour of various model alloys with NaCl-KCl coating10.1016/j.matchemphys.2005.03.015 ↗
30. B2O3 modified SiC–MoSi2 oxidation resistant coating for carbon/carbon composites by a two-step pack cementation10.1016/j.corsci.2009.06.033 ↗
31. Simultaneous chromizing—aluminizing coating of low-alloy steels by a halide-activated, pack-cementation process10.1007/BF00664491 ↗
32. Pack cementation coatings on Ti 3 Al–Nb alloys to modify the high-temperature oxidation properties10.1016/S0257-8972(00)00546-6 ↗
33. Deposition of aluminide and silicide based protective coatings on niobium10.1016/j.apsusc.2010.07.055 ↗
34. Development of oxidation resistant coatings on Mo–30W alloy10.1016/j.ijrmhm.2008.01.005 ↗
35. Gibbs energy coupling of the phase diagram and thermochemistry in the tantalum-carbon system10.1016/0925-8388(96)02197-4 ↗
36. FactSage thermochemical software and databases — recent developments10.1016/j.calphad.2008.09.009 ↗
37. Combustion synthesis of mechanically activated powders in the Ta–Si system10.1016/j.jallcom.2004.03.142 ↗
38. Growth mechanism of tantalum silicides by interdiffusion10.1080/14786435.2012.705036 ↗
39. Diffusion pattern in MSi2and M5Si3silicides in group VB (M = V, Nb, Ta) and VIB (M = Mo, W) refractory metal-silicon systems10.1080/14786435.2014.888103 ↗
40. Preparation of a double layer SiC coating and its oxidation resistance at 1773K10.1016/j.corsci.2014.06.024 ↗
41. Oxidation behavior of silicon carbide at 1200°C in both air and water–vapor-rich environments10.1016/j.corsci.2014.07.052 ↗
42. Hot corrosion behavior of silicide coating on an Nb–Ti–Si based ultrahigh temperature alloy10.1016/j.corsci.2014.10.053 ↗
43. Behaviour of a silicon-rich coating on Ti-46Al-8Ta (at.%) in hot-corrosion environments10.1016/j.corsci.2017.02.002 ↗
44. Structural characterization of the Ta-rich part of the Ta–Al system10.1016/j.jssc.2006.07.001 ↗
45. Annealing effects on microstructure and properties of Ta–Al thin film resistors10.1016/j.surfcoat.2006.08.059 ↗
46. Amorphization of Ta–Al films using magnetron sputtering10.1016/j.surfcoat.2005.08.100 ↗
47. Experimental study and thermodynamic modelling of the ternary Al–Ta–Ti system10.1016/j.intermet.2010.10.002 ↗
48. Experimental study and thermodynamic re-assessment of the binary Al–Ta system10.1016/j.intermet.2009.06.015 ↗
49. Formation of Ta–Al intermetallics by combustion synthesis involving Al-based thermite reactions10.1016/j.jallcom.2009.10.203 ↗
50. The role of oxide plasticity on the oxidation behavior of metals: a review10.1007/BF00609928 ↗
51. Stress generation and relief in growingoxide films10.1016/S0010-938X(70)80036-1 ↗
52. Pilling-Bedworth ratio for oxidation of alloys10.1007/s100190050008 ↗
53. Hot corrosion of materials: a fluxing mechanism?10.1016/S0010-938X(01)00057-9 ↗
54. Stability of protective oxide films in waste incineration environment—solubility measurement of oxides in molten chlorides10.1016/S0010-938X(01)00059-2 ↗