Determining the electric-field strength in a passive film via photo-induced electric fields

Abstract The nature of the electric-field strength in the passive film on tungsten is explored using photo-electrochemical techniques. A theoretical expression for the photo-stimulated growth of the film has been derived. Rotating ring-disk electrode (RRDE) experiments indicate that photo-corrosion of a tungsten electrode is negligible under super-band gap light illumination. XPS results show that tungsten is in the maximum possible oxidation state (VI) in the film and hence no higher oxidation state is available. The photo-stimulated transient film growth of tungsten in pH 8.5 ± 0.1 boric-borax buffer was recorded as a function of film formation potential (1 VSCE, 2 VSCE, 3 VSCE, 4 VSCE, 5 VSCE, 6 VSCE) and light intensities (50, 200, 1000 mW/cm2). Steady state passive film thickness measurements of the passive film on tungsten indicate that super band gap, UV light suppresses the electric field in the barrier layer, and hence stimulates anodic oxide film growth. The data obtained in this study demonstrate that the electric field strength in the steady state is independent of the applied potential and film thickness, as postulated in the Point Defect Model.