Particle sampling in boilers of waste incineration plants for characterizing corrosion relevant species
Source abstract
Abstract
Abstract A novel probe has been developed to characterize particles in boilers of waste incineration plants, which are under suspicion to essentially drive the corrosion processes. The probe collects larger particles on impaction plates and smaller particles on membranes, whose deposition characteristics have been studied by computational fluid dynamics. Artifacts by condensation of salt vapors are largely suppressed. The size distribution, morphology and chemical properties of the particles can be investigated by scanning electron microscopy and energy-dispersive X-ray spectroscopy. The probe has been employed for measurements in a waste incineration plant to characterize the aerosol on its way through the boiler.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Recycling and Waste Management Techniques · Aerosol Filtration and Electrostatic Precipitation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. High temperature corrosion problems in waste incineration systems10.1007/BF02833571 ↗
2. Fireside slagging fouling, and high-temperature corrosion of heat-transfer surface due to impurities in steam-raising fuels10.1016/0360-1285(95)00012-7 ↗
3. High-temperature corrosion in waste-to-energy boilers10.1007/s11666-006-9005-4 ↗
4. The mechanism in high temperature corrosion in municipal incinerators10.5006/0010-9312-28.7.274 ↗
5. High-temperature chlorine corrosion of metals and alloys10.1007/BF01184958 ↗
6. The role of chlorine in high temperature corrosion in waste-to-energy plants10.1080/09603409.1997.11689546 ↗
7. Chloridation and oxidation of iron chromium, nickel and their alloys in chloridizing and oxidizing atmospheres at 400–700°C10.1016/S0010-938X(99)00142-0 ↗
8. Fundamental aspects of chlorine induced corrosion in power plants10.1179/mht.2003.018 ↗
9. The effects of chlorides hydrogen chloride, and sulfur dioxide in the oxidation of steels below deposits10.1016/0010-938X(95)00011-8 ↗
10. The implications of chlorine-associated corrosion on the operation of biomass-fired boilers10.1016/S0360-1285(00)00003-4 ↗
11. High temperature corrosion mechanisms and effect of alloying elements for materials used in waste incineration environment10.1016/S0010-938X(01)00058-0 ↗
12. High temperature corrosion of coatings and boiler steels below chlorine-containing salt deposits10.1016/j.corsci.2003.09.026 ↗
13. High temperature corrosion in a 65MW waste to energy plant10.1016/j.fuproc.2007.06.031 ↗
14. Investigation into high-temperature corrosion in a large-scale municipal waste-to-energy plant10.1016/j.corsci.2010.07.032 ↗
15. Chemistry and melting characteristics of fireside deposits taken from boiler tubes in waste incinerators10.1016/j.corsci.2011.03.009 ↗
16. Investigation of chloride deposit formation in a 24 MWe waste to energy plant10.1016/j.fuel.2014.09.112 ↗
17. Investigations of aerosol formation pathways during MSW combustion based on high-temperature impactor measurements10.1016/j.fuproc.2011.04.036 ↗
18. Investigation of the mechanisms of heat exchanger corrosion in a municipal waste incineration plant by analysis of the raw gas and variation of operating parameters10.1080/01457630902751502 ↗
19. Measurement system for characterization of gas and particle phase of high temperature combustion10.1080/02786820903325402 ↗
20. Behavior of alkali metal aerosol in a high-temperature porous tube sampling probe10.1080/02786826.2012.700741 ↗
21. Equilibrium vaporization rates and vapor pressures of solid and liquid sodium chloride potassium chloride, potassium bromide, cesium iodide, and lithium fluoride10.1021/j100613a005 ↗
22. Hinds · 1999
23. Characterization of mineral matter particles in gasification and combustion processes10.1016/j.fuel.2015.01.025 ↗
24. Gehrke · 2008
25. Stahl · 2011
26. Whitby · 2003
27. Review aerosol fractionation by sequential filtration with nuclepore filters10.1016/0004-6981(81)90088-3 ↗
28. An investigative study on the chemical: morphological and mineralogical alterations of dry disposed fly ash during sequential chemical extraction
29. Comprehensive approach toward understanding element speciation and leaching behavior in municipal solid waste incineration electrostatic precipitator ash10.1021/es00003a010 ↗
30. Heavy metal adsorption onto flyash in waste incineration flue gases10.1205/095758200530439 ↗
31. Fluidization and agglomerate structure of SiO2 nanoparticles10.1016/S0032-5910(01)00491-0 ↗
32. Temporal evolution of nanoparticle aerosols in workplace exposure
33. Conceptual model for assessment of inhalation exposure to manufactured nanoparticles10.1038/jes.2011.4 ↗
34. Maisch · 2011
35. Use of incineration MSW ash: a review10.3390/su2071943 ↗
36. Models describing the degradation of FeAl and NiAl alloys induced by ZnCl2–KCl melt at 400–450°C10.1016/j.corsci.2003.10.019 ↗
37. High-temperature corrosion of superheater tube materials exposed to zinc salts10.1021/ef801012z ↗
38. MSWI super heater tube bundle: particle impaction efficiency and size distribution10.1016/j.fuproc.2012.09.007 ↗