Electrochemical corrosion studies of spark plasma sintered zirconia particle-reinforced high-alloy steel at different temperatures
Source abstract
Abstract
Abstract The influence of temperature on the corrosion behaviour of spark plasma sintered high-alloy steel – with particle reinforcement using 10 vol.% partially stabilised zirconia – was investigated. The cyclic polarisation behaviour and electrochemical impedance were analysed in a 5 wt.% sodium chloride solution. It was found that the corrosion potential was not influenced by temperature. However, the anodic polarisation behaviour and impedance exhibited significant declines in polarisation resistance when the temperature increased. A homogeneous corrosion attack was observed at 25 °C and 35 °C, while an intensified particle detachment and subsequent pitting corrosion occurred at 45 °C and 55 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Effects of in situ generated ZrB2 nano-particles on microstructure and tensile properties of 2024Al matrix composites10.1016/j.jallcom.2014.01.117 ↗
2. Reinforcing mechanism of Mg-PSZ particles in highly-alloyed TRIP steel10.1002/srin.201100099 ↗
3. Fabrication of in situ TiB2 particulates reinforced zinc alloy matrix composite10.1016/j.matlet.2014.01.050 ↗
4. Effect of shoulder diameter to pin diameter (D/d) ratio on tensile strength and ductility of friction stir processed LM25AA-5% SiCp metal matrix composites10.1016/j.matdes.2013.12.008 ↗
5. In situ TiB2 reinforced Al alloy composites10.1016/S1359-6462(01)01128-9 ↗
6. Strength and failure behaviour of spark plasma sintered steel-zirconia composites under compressive loading10.1002/srin.201100082 ↗
7. Fabrication of in situ TiC locally reinforced manganese steel matrix composite via combustion synthesis during casting10.1016/j.matdes.2012.07.063 ↗
8. Corrosion behavior of TiC particle-reinforced 304 stainless steel10.1016/j.corsci.2011.08.037 ↗
9. Corrosion behaviour of silicon-carbide-particle reinforced AZ92 magnesium alloy10.1016/j.corsci.2009.01.024 ↗
10. Corrosion behavior of SiC reinforced magnesium composites10.1016/j.corsci.2006.05.047 ↗
11. Effect of the reinforced boron carbide particulate content of AA6061 alloy on formation of the passive film in seawater10.1016/j.corsci.2011.04.023 ↗
12. The influence of silicon carbide reinforcement on the pitting behaviour of aluminium10.1016/0010-938X(96)00098-4 ↗
13. Corrosion behaviour of Mg–Cu and Mg–Mo composites in 3.5% NaCl10.1016/j.corsci.2008.06.043 ↗
14. Passivation behaviour of Alloy 31 (UNS N08031) in polluted phosphoric acid at different temperatures10.1016/j.corsci.2011.11.014 ↗
15. Critical pitting temperature (CPT) assessment of 2205 duplex stainless steel in 0.1 M NaCl at various molybdate concentrations10.1016/j.corsci.2010.08.008 ↗
16. Critical pitting temperature dependence of 2205 duplex stainless steel on dichromate ion concentration in chloride medium10.1016/j.corsci.2010.12.019 ↗
17. Correlation between critical pitting temperature and degree of sensitisation on alloy 2205 duplex stainless steel10.1016/j.corsci.2010.10.009 ↗
18. Evolution of current transients and morphology of metastable and stable pitting on stainless steel near the critical pitting temperature10.1016/j.corsci.2005.03.002 ↗
19. Dependence of the critical pitting temperature on surface roughness10.1016/S0010-938X(02)00215-9 ↗
20. Influence of temperature and applied potential on the electrochemical behaviour of nickel in LiBr solutions by means of electrochemical impedance spectroscopy10.1016/j.corsci.2009.06.027 ↗
21. A comparative study of critical pitting temperature (CPT) of stainless steels by electrochemical impedance spectroscopy (EIS), potentiodynamic and potentiostatic techniques10.1016/j.corsci.2012.02.026 ↗
22. Temperature effect on mild steel corrosion in acid media in presence of azoles10.1016/j.corsci.2006.10.020 ↗
23. Effect of temperature on passive film formation of UNS N08031 Cr–Ni alloy in phosphoric acid contaminated with different aggressive anions10.1016/j.electacta.2013.08.040 ↗
24. Reflections on the history of electrochemical impedance spectroscopy10.1016/j.electacta.2005.02.107 ↗
25. On the intrinsic coupling between constant-phase element parameters α and Q in electrochemical impedance spectroscopy10.1016/j.electacta.2012.04.020 ↗
26. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗
27. On the origin of capacitance dispersion of rough electrodes10.1016/S0013-4686(00)00574-0 ↗
28. The analysis of electrode impedances complicated by the presence of a constant phase element10.1016/S0022-0728(84)80324-1 ↗
29. Concerning the conversion of the constant phase element parameter Y0 into a capacitance10.5006/1.3280607 ↗
30. Hydrogen sorption in Pd monolayers in alkaline solution10.1016/j.electacta.2009.01.051 ↗
31. Surface characterisation of IrO2/TiO2/CeO2 oxide electrodes and faradaic impedance investigation of the oxygen evolution reaction from alkaline solution10.1016/S0013-4686(98)00276-X ↗
32. Relation between the semiconducting properties of a passive film and reduction reaction rates10.1149/1.3077576 ↗
33. Investigation of the barrier properties of silanes on cold rolled steel10.1016/j.electacta.2004.01.059 ↗
34. Nanostructured sol–gel coatings doped with cerium nitrate as pre-treatments for AA2024-T3 corrosion protection performance10.1016/j.electacta.2005.04.021 ↗
35. Use of EIS, ring-disk electrode, EQCM and Raman spectroscopy to study the film of oxides formed on iron in 1M NaOH10.1016/S0958-9465(01)00022-1 ↗
36. Characterization by electrochemical impedance spectroscopy of magnetite nanoparticles supported on carbon paste electrode10.1016/j.electacta.2010.11.039 ↗