Reaction behavior of TiC/Cu composite via thermal explosion reaction (TE) under Ar and air atmosphere
Source abstract
Abstract
Abstract Thermal explosion (TE) reaction behavior of Cu–Ti–C system with various Cu contents under air and Ar were investigated, respectively. Under two atmospheres, increasing Cu content can increase the ignition temperature and decrease the maximum temperature. The ignition temperature under air is much lower than that under Ar. The composite reacted under two atmospheres have the similar microstructure and phase constituent. Under air, on the surface of the compact, the oxidation and nitridation of Ti and the oxidation of Cu reduced the ignition temperature. The dissolution–diffusion–precipitation mechanism caused the formation of TiC under air, which was same as that under Ar.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Dense in situ TiB2:TiN and TiB2:TiC ceramic matrix composites: reactive synthesis and properties10.1016/S0921-5093(97)00835-6 ↗
2. Corrosion behavior of TiC particle-reinforced 304 stainless steel10.1016/j.corsci.2011.08.037 ↗
3. Influence of cobalt on the oxidation resistance of Al2O3–TiC composites at 800–1000°C in air10.1016/j.corsci.2014.07.032 ↗
4. Reaction synthesis of TiB2–TiC composites with enhanced toughness10.1016/S1359-6454(01)00034-9 ↗
5. A simple route to fabricate TiC–TiB2/Ni composite via thermal explosion reaction assisted with external pressure in air10.1016/j.matchemphys.2013.10.003 ↗
6. Microstructure, oxidation protection and failure mechanism of Yb2SiO5/LaMgAl11O19 coating deposited on C/SiC composites by atmospheric plasma spraying10.1016/j.corsci.2012.05.020 ↗
7. The mechanism of thermal explosion (TE) synthesis of TiC–TiB2 particulate locally reinforced steel matrix composites from an Al–Ti–B4C system via a TE-casting route10.1016/j.matchemphys.2011.10.051 ↗
8. Study of formation behavior of TiC ceramic obtained by self-propagating high-temperature synthesis from Al–Ti–C elemental powders10.1016/j.ijrmhm.2008.09.009 ↗
9. Ignition phenomena and reaction mechanisms of the self-propagating high-temperature synthesis reaction in the titanium–carbon–aluminum system10.1111/j.1151-2916.1997.tb02790.x ↗
10. Microstructure and mechanical properties of TiC–Ni functionally graded materials by simultaneous combustion synthesis and compaction10.1023/A:1004714402128 ↗
11. Microstructural evolution of the titanium particle in the in-situ composition of TiC–Fe by the combustion synthesis10.1016/S0924-0136(99)00278-2 ↗
12. Thermodynamic and lattice parameter calculation of TiCx produced from Al–Ti–C powders by laser igniting self-propagating high-temperature synthesis10.1016/j.msea.2006.12.075 ↗
13. Study of formation behavior of TiC in the Fe–Ti–C system during combustion synthesis10.1016/j.ijrmhm.2011.01.001 ↗
14. Effect of C particle size on the mechanism of self-propagation high-temperature synthesis in the Ni–Ti–C system10.1016/j.jallcom.2011.03.165 ↗
15. Influence of Cu addition on the self-propagating high-temperature synthesis of Ti5Si3 in Cu–Ti–Si system10.1016/j.matchemphys.2008.04.047 ↗
16. Thermal explosion synthesis of ZrC particles and their mechanism of formation from Al–Zr–C elemental powders10.1016/j.ijrmhm.2012.06.008 ↗
17. In situ processing of TiB2:TiC ceramic composites by thermal explosion under pressure: experimental study and modeling10.1016/S0921-5093(00)01359-9 ↗
18. Dense high-temperature ceramics by thermal explosion under pressure10.1016/S0955-2219(99)00104-1 ↗
19. Combustion characteristics of SHS process of titanium nitride with TiN dilution10.1016/j.ceramint.2003.08.009 ↗
20. A thermal explosion process to fabricate an intermetallic matrix composite coating on a steel10.1016/j.matdes.2008.12.013 ↗
21. Study on the reaction behavior of self-propagating high-temperature synthesis of TiC ceramic in the Cu–Ti–C system10.1016/j.ijrmhm.2012.06.002 ↗
22. Study on the reaction mechanism of self-propagating high-temperature synthesis of TiC in the Cu–Ti–C system10.1016/j.matchemphys.2012.09.007 ↗