Comparative study on corrosion behavior of Cu and Sn under UV light illumination in chloride-containing borate buffer solution
Source abstract
Abstract
Abstract Corrosion behaviors of copper and tin in chloride-containing borate buffer solutions (pH 8.4) were investigated through electrochemical and spectroscopic techniques in the presence and absence of UV illumination. Concerning effects of UV light on the corrosion processes, in a borate buffer solution containing 0.025 M NaCl, photo-enhanced pitting corrosion was observed on copper while photo-induced passivation was found on tin. The effect of UV illumination on corrosion was dependent on the interaction between the photo-generated carriers and the metal oxides, as well as the photostability of the oxide film. Chloride anions can decrease the photostability of the oxide film.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Photovoltage at semiconductor–electrolyte junctions10.1016/j.coelec.2017.03.006 ↗
2. Atmospheric corrosion of Cu during constant deposition of NaCl10.1149/2.037308jes ↗
3. Study on the mechanism of the photoelectrochemical effect on the initial NaCl-induced atmospheric corrosion process of pure copper exposed in humidified pure air10.1149/2.0771810jes ↗
4. Effect of UV illumination on the NaCl-induced atmospheric corrosion of pure zinc10.1149/2.015406jes ↗
5. Investigations of the interactions of CO2, O3 and UV light with silver surfaces by in situ IRRAS/QCM and ex situ TOF-SIMS10.1016/j.apsusc.2009.11.019 ↗
6. The role of UV illumination on the initial atmospheric corrosion of 09CuPCrNi weathering steel in the presence of NaCl particles10.1016/j.corsci.2014.07.013 ↗
7. The role of the photovoltaic effect of γ-FeOOH and β-FeOOH on the corrosion of 09CuPCrNi weathering steel under visible light10.1016/j.corsci.2015.01.019 ↗
8. The corrosion of copper in irradiated and unirradiated humid air10.1016/j.corsci.2018.05.024 ↗
9. Radiation induced corrosion of copper for spent nuclear fuel storage10.1016/j.radphyschem.2013.06.033 ↗
10. Γ-radiation induced corrosion of copper in bentonite-water systems under anaerobic conditions10.1016/j.radphyschem.2017.11.004 ↗
11. Illumination effects on the stability of the passive film on iron10.1016/0013-4686(94)00341-W ↗
12. Uniform and pitting corrosion events induced by SCN-anions on Al alloys surfaces and the effect of UV light10.1016/j.electacta.2010.12.045 ↗
13. The influence of UV light on the dissolution and passive behavior of copper-containing alloys in chloride solutions10.1016/S0013-4686(98)00109-1 ↗
14. Influence of uv light on the passive behaviour of SS316 - Effect of prior illumination10.1016/0013-4686(96)00177-6 ↗
15. Influence of uv light on passive behavior of the 304 stainless steel in acid solution10.1016/j.jpcs.2013.01.005 ↗
16. Effect of ZnO on the corrosion of zinc, Q235 carbon steel and 304 stainless steel under white light illumination10.1016/j.corsci.2013.12.022 ↗
17. Photo-induced corrosion or protection: determining the charge transfer in the semiconductor-metal heterojunction10.1016/j.jallcom.2019.152746 ↗
18. The effects of UV and visible light on the corrosion of bronze covered with an oxide film in aqueous solution10.1016/j.corsci.2019.01.009 ↗
19. Study of tin corrosion: the influence of alloying elements10.1016/j.culher.2003.10.002 ↗
20. Formation of porous SnO2 by anodic oxidation and their optical properties10.1016/j.cplett.2011.09.035 ↗
21. Corrosion of electrodeposited Sn in 0.01 m NaCl solution. A EQCM and EIS study10.1016/j.electacta.2015.12.015 ↗
22. Synthesis, characterization and in situ Raman detection of Sn3O2(OH)2-xClx phases as intermediates in tin corrosion10.1016/j.corsci.2015.05.052 ↗
23. Tin passivation in alkaline media: formation of SnO microcrystals as hydroxyl etching product10.1016/j.electacta.2013.07.200 ↗
24. Electrochemical migration of tin in thin electrolyte layer containing chloride ions10.1016/j.corsci.2013.04.015 ↗
25. Electrochemical behavior of tin anode in ascorbic acid solutions10.1016/j.matchemphys.2018.05.040 ↗
26. The corrosion of tin under thin electrolyte layers containing chloride10.1016/j.corsci.2012.08.040 ↗
27. Corrosion behavior assessment of tin-lead and lead free solders exposed to fire smoke generated by burning polyvinyl chloride10.1016/j.matchemphys.2018.03.057 ↗
28. Patina enrichment with SnO2 and its effect on soluble Cu cation release and passivity of high-purity Cu-Sn bronze in artificial perspiration10.1016/j.electacta.2018.06.125 ↗
29. The use of agar gelled electrolyte for in situ electrochemical measurements on metallic cultural heritage10.1016/j.electacta.2015.09.116 ↗
30. Enhanced electrochemical Cu release from commercial Cu-Sn alloys: fate of the alloying elements in artificial perspiration10.1016/j.electacta.2017.04.092 ↗
31. Synergistic effects of sodium lauroyl sarcosinate and glutamic acid in inhibition assembly against copper corrosion in acidic solution10.1016/j.apsusc.2015.08.034 ↗
32. Electrochemical impedance spectroscopy investigation of the electrochemical behaviour of copper coated with artificial patina layers and submitted to wet and dry cycles10.1016/j.electacta.2010.12.059 ↗
33. Antibacterial drugs as corrosion inhibitors for bronze surfaces in acidic solutions10.1016/j.apsusc.2014.09.201 ↗
34. Coupling of electrochemical techniques to study copper corrosion inhibition in 0.5molL−1 NaCl by 1-pyrrolidine dithiocarbamate10.1016/j.electacta.2012.09.056 ↗
35. Protective effect of inhibitor-containing nitrocellulose lacquer on artificially patinated bronze10.1016/j.porgcoat.2016.08.004 ↗
36. Electrochemical and spectroscopic evidences of corrosion inhibition of bronze by a triazole derivative10.1016/j.electacta.2007.01.068 ↗
37. Coupling of electrochemical, electrogravimetric and surface analysis techniques to study dithiocarbamate/bronze interactions in chloride media
38. Composition and electrochemical properties of natural patinas of outdoor bronze monuments10.1016/j.electacta.2006.12.053 ↗
39. Protection of bronze covered with patina by innoxious organic substances10.1016/j.electacta.2007.02.024 ↗
40. Evaluation of some phenothiazine derivatives as corrosion inhibitors for bronze in weakly acidic solution10.1016/j.corsci.2012.06.010 ↗
41. The corrosion of nickel–aluminium bronze in seawater10.1016/j.corsci.2005.05.053 ↗
42. Electrochemical and spectroscopic characterizations of patinas formed on an archaeological bronze coin10.1016/j.electacta.2005.01.050 ↗
43. The characterization of Sn-based corrosion products in ancient bronzes: a Raman approach10.1002/jrs.4037 ↗
44. Corrosion and runoff rates of Cu and three Cu-alloys in marine environments with increasing chloride deposition rate10.1016/j.scitotenv.2013.11.080 ↗
45. Comparative studies of chemical and electrochemical preparation of artificial bronze patinas and their protection by corrosion inhibitor10.1016/j.electacta.2009.07.014 ↗
46. XPS study of the atmospheric corrosion of copper alloys of archaeological interest10.1002/sia.1790 ↗
47. Characterization of typical patinas simulating bronze corrosion in outdoor conditions10.1016/j.matchemphys.2017.07.091 ↗
48. Corrosion mechanism of copper in palm biodiesel10.1016/j.corsci.2012.10.006 ↗
49. Characterization of the patina formed on a low tin bronze exposed to aqueous hydrogen sulfide10.1002/sia.5520 ↗
50. In situ studies of metal passive films10.1016/j.cossms.2007.01.002 ↗
51. In situ STM study of the duplex passive films formed on Cu(111) and Cu(001) in 0.1 M NaOH10.1016/S0010-938X(03)00140-9 ↗
52. Surface study of films formed on copper and brass at open circuit potential10.1016/j.apsusc.2012.12.050 ↗
53. Initial and later stages of anodic oxide formation on Cu, chemical aspects, structure and electronic properties10.1016/S0013-4686(01)00657-0 ↗
54. Electrochemical studies on the anodic behavior of tin in citrate buffer solutions10.1016/j.jelechem.2009.12.002 ↗
55. The corrosion and passivation of tin in borate solutions and the effect of halide ions10.1016/0013-4686(96)00068-0 ↗
56. Corrosion of tin in citric acid solution and the effect of some inorganic anions10.1016/S0254-0584(03)00128-7 ↗
57. Corrosion products of tin in humid air containing sulfur dioxide and nitrogen dioxide at room temperature10.1016/S0010-938X(02)00151-8 ↗
58. In-situ investigation of the semiconductive properties and protective role of Cu2O layer formed on copper in a borate buffer solution10.1016/j.jelechem.2017.12.028 ↗
59. P-type SnO thin films prepared by reactive sputtering at high deposition rates10.1016/j.jmst.2019.03.034 ↗
60. Capacitive studies of the semiconducting properties of passive tin electrodes10.1016/0013-4686(80)87099-X ↗
61. Impedance spectroscopy of semiconducting films on tin electrodes10.1016/S0013-4686(99)00298-4 ↗
62. Passivity breakdown on copper: influence of borate anion10.1016/j.electacta.2019.07.056 ↗
63. Solubility measurements of crystalline Cu2O in aqueous solution as a function of temperature and pH10.1007/s10953-011-9699-x ↗
64. A study of copper passivity by electrochemical impedance spectroscopy10.1149/1.1354608 ↗
65. The point defect model for the passive state10.1149/1.2069096 ↗
66. IR and Raman spectroelectrochemical studies of corrosion films on tin10.1016/S0013-4686(00)00660-5 ↗
67. Electrochemical studies of the pitting corrosion of tin in citric acid solution containing Cl-10.1016/j.electacta.2008.01.051 ↗
68. Perchlorate pitting corrosion of tin in Na2CO3 solutions and effect of some inorganic inhibitors10.1016/j.corsci.2005.05.013 ↗