The effect of electrode surface area on corrosion initiation monitoring of X65 steel in soil
Source abstract
Abstract
Abstract This work examines the effect of electrode surface area on the monitoring of corrosion initiation on X65 steel buried in soil under the scenario that cathodic protection (CP) was disrupted, mimicking a corrosion issue frequently observed on underground steel pipelines. Current mapping using an electrochemically integrated multi-electrode array has been performed in conjunction with electrode potential monitoring to visualise dynamic early corrosion initiation process. After CP was disrupted, corrosion was found to initiate earlier on smaller sized electrodes. The prior CP induced steel surface pH was found to play a decisive role in determining the pitting susceptibility. Results suggest that electrode size needs to be carefully considered when corrosion monitoring is performed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Pitting corrosion of metals a review of the critical factors10.1149/1.1838615 ↗
2. Passivity breakdown and pitting corrosion of binary alloys10.1038/350216a0 ↗
3. Sudden onset of pitting corrosion on stainless steel as a critical phenomenon10.1126/science.1101358 ↗
4. Understanding the effects of electrode inhomogeneity and electrochemical heterogeneity on pitting corrosion initiation on bare electrode surfaces10.1016/j.corsci.2011.02.002 ↗
5. Interaction of mechanical and electrochemical factors in erosion–corrosion of carbon steel10.1016/j.electacta.2005.04.032 ↗
6. Probing corrosion initiation at interfacial nanostructures of AA2024-T310.1016/j.corsci.2016.12.006 ↗
7. Understanding localized corrosion10.1016/S1369-7021(08)70206-2 ↗
8. Passivity–the key to our metals-based civilization10.1351/pac199971060951 ↗
9. Probabilistic considerations on the effect of specimen size on the critical chloride content in reinforced concrete10.1016/j.corsci.2010.09.017 ↗
10. Influence of specimen area on the pitting probability of aluminum10.1149/1.2429915 ↗
11. The initiation of pitting corrosion on austenitic stainless steel: on the role and importance of sulphide inclusions10.1016/0010-938X(92)90074-D ↗
12. Chloride corrosion threshold of reinforcing steel in alkaline solutions—effect of specimen size10.5006/1.3287721 ↗
13. The size effect in corrosion greatly influences the predicted life span of concrete infrastructures10.1126/sciadv.1700751 ↗
14. Mathematical models for cathodic protection of an underground pipeline with coating holidays: part 1—Theoretical development10.5006/1.3280467 ↗
15. Mathematical models for cathodic protection of an underground pipeline with coating holidays: part 2—Case studies of parallel anode cathodic protection systems10.5006/1.3280485 ↗
16. Application of boundary element models to predict effectiveness of coupons for accessing cathodic protection of buried structures10.5006/1.3280582 ↗
17. Current and potential distribution on a coated pipeline with holidays part I—model and experimental verification10.5006/1.3316041 ↗
18. Current and potential distribution on a coated pipeline with holidays part II—Comparison of the effects of discrete and distributed holidays10.5006/1.3316042 ↗
19. Investigation of processes occurring at cathodically protected underground installations: Experimental study of pH alteration and mathematical modeling of oxygen transport in soil10.1016/j.corsci.2016.12.003 ↗
20. Investigation of processes occurring at cathodically protected underground installations: Mathematical modeling of reaction transport processes in soil10.1016/j.corsci.2016.12.002 ↗
21. A novel approach for the evaluation of under deposit corrosion in marine environments using combined analysis by electrochemical impedance spectroscopy and electrochemical noise10.1016/j.electacta.2016.08.146 ↗
22. Visualising dynamic passivation and localised corrosion processes occurring on buried steel surfaces under the effect of anodic transients10.1016/j.elecom.2016.02.015 ↗
23. Measuring and understanding the critical duration and amplitude of anodic transients, Corrosion Engineering
24. Localised corrosion of cathodically protected pipeline steel under the effects of cyclic potential transients
25. Effect of variation of cathodic protection level over time on the ac corrosion process
26. Sensing localised corrosion by means of electrochemical noise detection and analysis10.1016/j.snb.2009.03.061 ↗
27. Visualizing dynamic and localized corrosion on cathodically protected steel buried in soil with different moisture contents
28. Understanding the effectiveness of cathodic protection under disbonded coatings10.1016/j.electacta.2015.10.171 ↗
29. Electrochemical method for studying localized corrosion beneath disbonded coatings under cathodic protection10.1149/2.0301510jes ↗
30. Electrokinetic remediation. I: pilot-scale tests with lead-spiked kaolinite10.1061/(ASCE)0733-9410(1996)122:3(173) ↗
31. Environmental factors affecting the corrosion behavior of reinforcing steel II. Role of some anions in the initiation and inhibition of pitting corrosion of steel in Ca(OH)2 solutions10.1016/j.corsci.2009.09.004 ↗
32. Occurrence of anodic current and corrosion of steel in aqueous media under fluctuating cathodic protection potentials10.5006/1637 ↗
33. Environmental factors affecting the corrosion behaviour of reinforcing steel: I. The early stage of passive film formation in Ca(OH)2 solutions10.1016/j.corsci.2010.07.035 ↗
34. Film thickening on nickel in aqueous solution in relation to anion type and concentration10.1179/000705979798276022 ↗
35. Evolution of the corrosion potential of repassivating aluminium surfaces10.1016/0010-938X(92)90075-E ↗
36. Modeling influence of gas/liquid/solid three-phase boundary zone on cathodic process of soil corrosion10.1016/j.electacta.2009.01.033 ↗
37. Influence of electrolyte layer thickness and pH on the initial stage of the atmospheric corrosion of iron10.1149/1.1837578 ↗
38. Passive behaviour of alloy corrosion-resistant steel Cr10Mo1 in simulating concrete pore solutions with different pH10.1016/j.apsusc.2016.07.142 ↗
39. Changes in the passive layer of corrugated austenitic stainless steel of low nickel content due to exposure to simulated pore solutions10.1016/j.corsci.2009.01.012 ↗
40. The passive behaviour of AISI 316 in alkaline media and the effect of pH: a combined electrochemical and analytical study10.1016/j.electacta.2009.10.026 ↗
41. The electrochemical behaviour of stainless steel AISI 304 in alkaline solutions with different pH in the presence of chlorides10.1016/j.electacta.2011.02.094 ↗