The research on the sliding friction and wear behaviors of TiAl-10 wt%Ag at elevated temperatures
Source abstract
Abstract
Abstract The objective of this paper was to study effect of competitive mechanism between O and Ag contents on the friction and wear behaviors of TiAl-10 wt%Ag. Based on the changes in the contents of O and Ag on wear scars, the tribological performance of TiAl-10 wt%Ag was analyzed sliding against silicon nitride balls at 25–900 °C. The testing results showed the excellent sliding friction and wear behavior of TiAl-10 wt%Ag was mainly attributed to the forming of lubricating film containing massive Ag at 450 °C. It was found that at 0–30 min, the friction coefficient and wear rate were rapidly lowered with the increasing of O and Ag contents. At 30–240 min, massive Ag was squeezed out of TiAl-10 wt%Ag to form lubricating film containing massive Ag, it decreased oxidation reaction rate and resulted in the increasing of Ag content and the decreasing of O content on wear scar. The sliding friction coefficients and wear rates of TiAl-10 wt%Ag were further lowered at 30–240 min.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Investigation into the use of CaZrO3, as a facecoat material in the investment casting of TiAl alloys10.1016/j.matchemphys.2015.02.026 ↗
2. Thermal cycling induced microstructural instability in fully lamellar Ti–45Al–8.5Nb–(W, B, Y) alloys10.1016/j.matchemphys.2015.10.017 ↗
3. Performance, tolerance and cost of TiAl passenger car valves10.1016/j.intermet.2005.08.009 ↗
4. Wear mechanisms of WC inserts in face milling of gamma titanium aluminides10.1016/j.wear.2005.02.062 ↗
5. The influence of mould pre-heat temperature and casting size on the interaction between a Ti-46Al-8Nb-1B alloy and the mould comprising an Al2O3 face coat10.1016/j.matchemphys.2014.03.026 ↗
6. Fretting wear of Ti-48Al-2Cr-2Nb10.1016/S0301-679X(02)00142-1 ↗
7. Sliding wear behaviour of two gamma-based titanium aluminides10.1016/S0043-1648(00)00334-3 ↗
8. Investigation of mechanical and tribological behaviors of multilayer graphene reinforced Ni3Al matrix composites10.1016/j.compositesb.2014.10.052 ↗
9. Novel surfactant-stabilized graphene-polyaniline composite nanofiber for supercapacitor applications10.1016/j.compositesb.2015.03.004 ↗
10. Study on mechanical and wear properties of Al 7075/Al2O3/graphite hybrid composites10.1016/j.compositesb.2013.08.013 ↗
11. Tribological properties of self-lubricating NiAl/Mo-based composites containing AgVO3 nanowires10.1016/j.matchar.2014.09.006 ↗
12. Tribological behavior of TiAl matrix self-lubricating composites containing silver from 25 to 800°C10.1016/j.wear.2013.04.009 ↗
13. Wear performance of TiC as reinforcement of a magnesium alloy matrix composite10.1016/j.compositesb.2010.11.012 ↗
14. Production and wear characterisation of AA 6061 matrix titanium carbide particulate reinforced composite by enhanced stir casting method10.1016/j.compositesb.2011.08.049 ↗
15. The effects of elevated ambient temperature on the friction and wear behaviour of some commercial nickel-base alloys
16. Models for the generation of oxides during sliding10.1098/rspa.1985.0113 ↗
17. The role of oxidation in the wear of metals10.1016/S0301-679X(98)00008-5 ↗
18. Standard test method for vickers hardness of metallic materials
19. Standard test methods for density of compacted or sintered powder metallurgy (PM) products using Archimedes’ principle
20. Standard test method for wear testing with a pin-on-disk apparatus
21. Effect of load and sliding speed on friction and wear behavior of silver/h-BN containing Ni-base P/M composites10.1016/j.wear.2010.08.013 ↗
22. Tribological behavior of a TiAl matrix composite containing 10 wt% Ag investigated at four wear stages10.1039/C5RA13066B ↗