The percolation threshold for tensile strength of polymer/CNT nanocomposites assuming filler network and interphase regions
Source abstract
Abstract
Abstract In this article, the percolation threshold for tensile strength of polymer/CNT nanocomposites (PCNT) is studied by known Pukanszky model. Since the network of nanoparticles forms at very low concentration of CNT, the filler network shows strengthening efficiency in PCNT beside the interphase regions surrounding nanoparticles. The Pukanszky model is developed by the properties of network such as density (N) and strength (σN). The suggested equations are applied in some samples and the results are explained. Also, the effects of several parameters such as “N”, “σN” and percolation volume fraction ( ϕ p ) on the strength of PCNT are plotted based on the developed model. The direct influences of “N” and “σN” as well as the inverse effect of “ ϕ p ” on the tensile strength of PCNT are displayed. The “σN” parameter only changes the strength of PCNT at low “ ϕ p ”, which shows the important role of percolation level.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · Polymer Nanocomposite Synthesis and Irradiation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Effects of thermal annealing on SEBS/MWCNTs temperature-sensitive nanocomposites for the measurement of skin temperature10.1016/j.matchemphys.2016.11.018 ↗
2. Electrocatalytic sensing of poly-nitroaromatic compounds on multiwalled carbon nanotubes modified with alkoxysulfonated derivative of PEDOT10.1016/j.matchemphys.2016.10.035 ↗
3. Phosphonium–based ionic liquid as dispersing agent for MWCNT in melt-mixing polystyrene blends: rheology, electrical properties and EMI shielding effectiveness10.1016/j.matchemphys.2016.12.073 ↗
4. The influence of acid-treated multi-walled carbon nanotubes on the surface morphology and thermal properties of alanine-based poly (amide–imide)/MWCNT nanocomposites system10.1007/s00396-014-3437-z ↗
5. Immobilization of acetylcholinesterase on electrospun poly (acrylic acid)/multi-walled carbon nanotube nanofibrous membranes10.1039/C5RA03456F ↗
6. Fabrication of stacked-cup carbon nanotube/polymer nanocomposite films with linear controlled percolation routes10.1016/j.matchemphys.2016.01.027 ↗
7. Tribological and mechanical investigation of acrylic-based nanocomposite coatings reinforced with PMMA-grafted-MWCNT10.1016/j.matchemphys.2016.03.021 ↗
8. Morphology, rheology and electrical resistivity of PLLA/HDPE/CNT nanocomposites: effect of maleic anhydride10.1016/j.matchemphys.2014.12.020 ↗
9. An extremely uniform dispersion of MWCNTs in olefin block copolymers significantly enhances electrical and mechanical performances10.1039/C5PY01236H ↗
10. Selective distribution and migration of carbon nanotubes enhanced electrical and mechanical performances in polyolefin elastomers10.1016/j.polymer.2016.12.056 ↗
11. Influences of nanoparticles aggregation/agglomeration on the interfacial/interphase and tensile properties of nanocomposites10.1016/j.compositesb.2017.04.008 ↗
12. The roles of nanoparticles accumulation and interphase properties in properties of polymer particulate nanocomposites by a multi-step methodology10.1016/j.compositesa.2016.10.003 ↗
13. On the tensile behavior of an embedded carbon nanotube in polymer matrix with non-bonded interphase region10.1016/j.compstruct.2009.09.033 ↗
14. “a” interfacial parameter in Nicolais–Narkis model for yield strength of polymer particulate nanocomposites as a function of material and interphase properties10.1016/j.jcis.2016.02.035 ↗
15. Modeling approach for tensile strength of interphase layers in polymer nanocomposites10.1016/j.jcis.2016.03.029 ↗
16. A two-step method based on micromechanical models to predict the Young's modulus of polymer nanocomposites10.1002/mame.201600010 ↗
17. Modeling and characterization of the electrical conductivity of carbon nanotube-based polymer composites10.1016/j.polymer.2011.06.046 ↗
18. Micromechanics modeling of the electrical conductivity of carbon nanotube (CNT)–polymer nanocomposites10.1016/j.compositesa.2012.12.008 ↗
19. Three-dimensional evolution of mechanical percolation in nanocomposites with random microstructures10.1016/j.probengmech.2012.02.002 ↗
20. Mechanical percolation in cellulose whisker nanocomposites10.1002/pen.11821 ↗
21. An approach to study the roles of percolation threshold and interphase in tensile modulus of polymer/clay nanocomposites10.1016/j.jcis.2016.09.080 ↗
22. Stiffness threshold of randomly distributed carbon nanotube networks10.1016/j.jmps.2015.07.016 ↗
23. An attempt to quantitatively predict the interfacial adhesion of differently surface treated nanosilicas in a polyurethane coating matrix using tensile strength and DMTA analysis10.1016/j.ijadhadh.2011.12.005 ↗
24. Development of a conventional model to predict the electrical conductivity of polymer/carbon nanotubes nanocomposites by interphase, waviness and contact effects10.1016/j.compositesa.2017.05.031 ↗
25. Development of a model for electrical conductivity of polymer graphene nanocomposites assuming interphase and tunneling regions in conductive networks10.1021/acs.iecr.7b01348 ↗
26. A simple methodology to predict the tunneling conductivity of polymer/CNT nanocomposites by the roles of tunneling distance, interphase and CNT waviness10.1039/C7RA04034B ↗
27. Elastic, viscoelastic and plastic behavior of multiphase polymer blends
28. Comparison of filler percolation and mechanical properties in graphene and carbon nanotubes filled epoxy nanocomposites10.1016/j.eurpolymj.2013.02.033 ↗
29. Effect of interphase percolation on mechanical behavior of nanoparticle-reinforced polymer nanocomposite with filler agglomeration: a multiscale approach10.1016/j.cplett.2015.06.054 ↗
30. Correlating the rheological and mechanical response of polyurethane nanocomposites containing hyperbranched polymers10.1016/j.polymer.2005.05.006 ↗
31. Influence of interface interaction on the ultimate tensile properties of polymer composites10.1016/0010-4361(90)90240-W ↗
32. Dependence of the Pukánszky’s interaction parameter B on the interface shear strength (IFSS) of nanofiller-and short fiber-reinforced polymer composites10.1016/j.compscitech.2014.01.002 ↗
33. Accounting the reinforcing efficiency and percolating role of interphase regions in the tensile modulus of polymer/CNT nanocomposites10.1016/j.eurpolymj.2017.01.007 ↗
34. The mechanical behavior of CNT reinforced nanocomposites assuming imperfect interfacial bonding between matrix and nanoparticles and percolation of interphase regions10.1016/j.compscitech.2017.03.012 ↗
35. Factors and processes influencing the reinforcing effect of layered silicates in polymer nanocomposites10.1016/j.eurpolymj.2006.11.005 ↗
36. Preparation and properties of chitosan/carbon nanotube nanocomposites using poly (styrene sulfonic acid)-modified CNTs10.1016/j.carbpol.2008.10.021 ↗
37. Morphological, electrical, and mechanical properties of multiwall carbon nanotube/polysilsesquioxane composite10.1002/app.27660 ↗
38. A model for tensile strength of polymer/clay nanocomposites assuming complete and incomplete interfacial adhesion between the polymer matrix and nanoparticles by the average normal stress in clay platelets10.1039/C6RA04132A ↗
39. Morphological and mechanical properties of bile salt modified multi-walled carbon nanotube/poly (vinyl alcohol) nanocomposites10.1016/j.compositesa.2007.04.014 ↗
40. A solvent-free dispersion method for the preparation of PET/MWCNT composites10.1002/mame.200900384 ↗