Comparison of damaging behavior of oxide scales grown on austenitic stainless steels using tensile test and cyclic thermogravimetry
Source abstract
Abstract
Two austenitic stainless steels, AISI 304L and AISI 303, were submitted to cyclic oxidation and to staticmechanical loading after isothermal oxidation at 1000◦C. Alloy 303 contains ten times more S than 304Land some Mn addition. During the steel process, it formed manganese sulfides that lead to the formationof a less resistant oxide scale. Both alloys showed similar behavior during thermal cycling but breakawayoxidation and intensive spallation occurred much sooner for alloy 303 than for alloy 304L. A correlationcould be drawn between tensile test on preoxidized samples, isothermal and cyclic oxidation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Reactive element–sulfur interaction and oxide scale adherence10.1007/BF02811687 ↗
2. A relationship between indigenous impurity elements and protective oxide scale adherence characteristics10.1007/BF02661258 ↗
3. Adherent Al2O3 scales formed on undoped NiCrAl alloys10.1007/BF02646237 ↗
4. Oxide scale adhesion and impurity segregation at the scale/metal interface10.1007/BF00665658 ↗
5. Characterization of sulfur distribution in Ni-based superalloy and thermal barrier coating after high temperature oxidation: a SIMS analysis10.1007/s11085-009-9164-z ↗
6. Segregation of sulfur during growth of oxide scales10.1016/0169-4332(91)90038-L ↗
7. Segregation at the Al2O3–FeCrAl interface during high-temperature oxidation10.1023/A:1018818906559 ↗
8. On the reasons for the effects of dispersions of stable oxides and additions of reactive elements on the adhesion and growth-mechanisms of chromia and alumina scales—the sulfur effect10.1007/BF00656731 ↗
9. Breakaway oxidation of austenitic stainless steels induced by alloyed sulphur10.1016/j.corsci.2015.01.007 ↗
10. Measurement of the adhesion of a brittle film on a ductile substrate by indentation10.1098/rspa.1996.0124 ↗
11. Failure mode maps in the thin film scratch adhesion test10.1016/S0301-679X(97)00012-1 ↗
12. An overview of the potential of quantitative coating adhesion measurement by scratch testing10.1016/j.triboint.2005.04.013 ↗
13. Adhesion evaluation of thin ceramic coatings on tool steel using the scratch testing technique10.1016/0257-8972(94)02396-4 ↗
14. Modified four-point bending specimen for determining the interface fracture energy for thin, brittle layers10.1023/A:1007530932726 ↗
15. An in situ investigation of the tensile failure of oxide scales10.1007/BF01046759 ↗
16. Determination of mechanical adhesion energy of thermal oxide scales on AISI 430Ti alloy using tensile test10.1179/174328407X168964 ↗
17. Cracking and loss of adhesion of Si3N4 and SiO2: P films deposited on Al substrates10.1163/156856198X00407 ↗
18. The cracking and decohesion of thin films on ductile substrates10.1016/0001-6160(89)90018-7 ↗
19. Quantification of growth kinetics and adherence of oxide scales formed on Ni-based superalloys at high temperature10.1016/j.corsci.2010.08.013 ↗
20. Continuous thermogravimetry under cyclic conditions10.1023/B:OXID.0000016281.25965.93 ↗
21. Determination of parabolic rate constants from a local analysis of mass–gain curves10.1023/A:1018860909826 ↗
22. High temperature oxidation of austenitic stainless steel in low oxygen pressure10.1016/0010-938X(77)90011-7 ↗
23. Oxidation behavior of fine-grained rapidly solidified 18-8 stainless steel10.1007/BF02643355 ↗
24. Effect of alloy grain size and silicon content on the oxidation of austenitic Fe–Cr–Ni–Mn–Si alloys in pure O210.1007/BF00662967 ↗
25. Thermodynamic and kinetics aspects of high temperature oxidation on a 304L stainless steel10.1007/s11085-013-9465-0 ↗
26. Oxidation and phase transformation of austenitic 304L steel under accidental high temperature condition
27. Martensitic transformation in an intergranular corrosion area of austenitic stainless steel during thermal cycling10.1016/j.corsci.2014.04.048 ↗
28. Mechanical and microstructural characterization of oxide films damage10.1016/S0921-5093(01)01931-1 ↗
29. Measuring adhesion of Cr2O3 and Al2O3 scales on Fe-based alloys10.4028/www.scientific.net/MSF.461-464.631 ↗
30. Study on the deformation mechanics of hard brittle coatings on ductile substrates using in situ tensile testing and cohesive zone FEM modeling10.1016/j.surfcoat.2012.06.049 ↗
31. Cyclic oxidation of coated and uncoated single-crystal nickel-based superalloy MC2 analysed by continuous thermogravimetry analysis10.1016/j.actamat.2006.05.034 ↗