Synergistic effect of corrosion and wear of the 316 stainless steel in molten zinc alloy at 460 °C
Source abstract
Abstract
Abstract The failure of 316 stainless steel under tribo-corrosion in molten zinc alloy (Zn-0.2Al, wt%) at 460 °C was investigated and compared with corrosion or the sole wear. In the absence of wear, intact Fe2Al5Znx layer forms and protects the steel from dramatic corrosion. Without liquid-metal corrosion, the steel suffers from plastic deformation on friction and slight adhesive wear. While for tribo-corrosion, the synergy of corrosion and wear accounts for 90 % of material loss. Firstly, corrosion generates a brittle scale and leads to embrittlement at subsurface, which accelerate wear. Secondly, wear promotes the formation of less-protective FeZn10 scale, accelerating corrosion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. 3D printing of free standing liquid metal microstructures10.1002/adma.201301400 ↗
2. Magnesium-antimony liquid metal battery for stationary energy storage10.1021/ja209759s ↗
3. Advanced Al2O3 coatings for high temperature operation of steels in heavy liquid metals: a preliminary study10.1016/j.corsci.2013.07.039 ↗
4. Experimental and theoretical research on interfacial reaction of solid Co with liquid Al10.1016/j.corsci.2013.03.024 ↗
5. Interfacial morphology and corrosion-wear behavior of cast Fe-3.5 wt.% B steel in liquid zinc10.1016/j.corsci.2017.12.003 ↗
6. Self-fueled biomimetic liquid metal mollusk10.1002/adma.201405438 ↗
7. A review of steel corrosion by liquid lead and lead–bismuth10.1016/j.corsci.2009.03.013 ↗
8. Multiscale investigation of crack path and microstructural changes during liquid metal embrittlement of 304L austenitic steel in liquid sodium10.1016/j.corsci.2017.08.009 ↗
9. Creep-to-rupture tests of T91 steel in flowing Pb–Bi eutectic melt at 550 °C10.1016/j.jnucmat.2009.08.013 ↗
10. Ultrastretchable fibers with metallic conductivity using a liquid metal alloy core10.1002/adfm.201202405 ↗
11. Review of the studies on fundamental issues in LBE corrosion10.1016/j.jnucmat.2007.06.019 ↗
12. Review on corrosion-wear resistance performance of materials in molten aluminum and its alloys10.1016/S1003-6326(15)63777-3 ↗
13. Review of liquid metal corrosion issues for potential containment materials for liquid lead and lead–bismuth eutectic spallation targets as a neutron source10.1016/S0029-5493(99)00303-9 ↗
14. Experimental equipment for fretting corrosion simulation in heavy liquid metals for nuclear applications10.1016/j.wear.2012.01.018 ↗
15. On the fretting wear mechanism of Zr-alloys10.1016/j.triboint.2006.02.053 ↗
16. High-frequency, high-temperature fretting–fatigue experiments10.1016/j.wear.2006.03.048 ↗
17. Wear of cobalt-based alloys sliding in molten zinc10.1016/S0043-1648(03)00050-4 ↗
18. Effects of test conditions on the tribological behaviour of a journal bearing in molten zinc10.1016/j.wear.2005.01.003 ↗
19. Failure analysis of pin prick defects in galvannealed sheet-A case study10.1016/j.engfailanal.2009.04.006 ↗
20. Root cause analysis of an uncommon surface defect on galvannealed steel sheet10.1016/j.engfailanal.2018.07.004 ↗
21. Modelling the tribo-corrosion interaction in aqueous sliding conditions10.1016/S0301-679X(02)00058-0 ↗
22. Liquid metal corrosion of 316L stainless steel, 410 stainless steel, and 1015 carbon steel in a molten zinc bath10.1007/s11661-007-9320-5 ↗
23. Effect of erosion angle and Fe2B orientation on cavitation erosion and interfaces of Fe-B alloy in high-velocity flowing zinc10.1016/j.wear.2018.04.007 ↗
24. MoB–CoCr as alternatives to WC–12Co for stainless steel protective coating and its corrosion behavior in molten zinc10.1016/j.surfcoat.2013.08.052 ↗
25. Liquid metal corrosion of 316L, Fe3Al, and FeCrSi in molten Zn-Al baths
26. Improving corrosion resistance of ferrous alloy to molten Zn by modifying the laves phase characteristics10.1007/s11837-017-2493-5 ↗
27. Improving the corrosion resistance of Fe-21Cr-9Mn alloy in liquid zinc by heat treatment10.1016/j.corsci.2016.05.018 ↗
28. Interfacial morphology and corrosion resistance of Fe-B cast steel containing chromium and nickel in liquid zinc10.1016/j.corsci.2011.05.020 ↗
29. Effect of Fe2B orientation on erosion-corrosion behavior of Fe-3.5 wt.% B steel in flowing zinc10.1016/j.corsci.2015.05.039 ↗
30. The corrosion of Fe3Al alloy in liquid zinc10.1016/j.corsci.2006.10.002 ↗
31. Reaction of WC-Co coating with molten zinc in a zinc pot of a continuous galvanizing line10.1016/S0257-8972(00)01136-1 ↗
32. Influence of gas atmosphere dew point on the galvannealing of CMnSi TRIP steel10.1007/s11661-013-1867-8 ↗
33. Zn penetration in liquid metal embrittled TWIP steel10.1007/s11661-016-3475-x ↗
34. Embrittlement by liquid metals10.1016/0079-6425(73)90005-4 ↗
35. Liquid metal embrittlement in laser lap joining of TWIP and medium-manganese TRIP steel: the role of stress and grain boundaries10.1016/j.matchar.2018.09.018 ↗
36. A full thermodynamic optimization of the Zn–Fe–Al system within the 420–500 °C temperature range10.1016/j.calphad.2006.09.003 ↗
37. Thermodynamic evaluation of the Fe–Zn system10.1016/S0925-8388(01)01273-7 ↗
38. Formation of Fe2Al5-xZnx intermetallic crystals at the Fe-Zn interface in hot-dip galvanizing10.1016/j.matchar.2018.01.027 ↗
39. Effect of strip temperature on the formation of an Fe2Al5 inhibition layer during hot-dip galvanizing10.1016/j.scriptamat.2008.12.033 ↗
40. Measurement and correlation of the solubility of 2,3,4,5-tetrabromothiophene in different solvents10.1016/j.jct.2012.06.005 ↗