Corrosion mitigation behavior of an alternately wetted steel electrode in oil/water media
Source abstract
Abstract
Abstract To reveal the corrosion behavior of an alternately wetted steel surface in oil/water media, an apparatus that could freely tune the alternate wetting period and the rotating rate was designed to acquire electrochemical signals of the steel using a rotating disk system. It was found that a lower rotating rate and a shorter wetting period resulted in less current fluctuations and hence more effective mitigation of steel dissolution. With increasing oil viscosity, a sharp decrease in the dissolution mitigate efficiency was observed, which could be attributed to the dynamic wetting and the local turbulence near the steel surface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Entrainment of water by flowing oil
2. Effect of the crude oil on corrosion of steel in crude oil/brine production10.5006/1.3577835 ↗
3. Castillo · 2000 · 00005
4. Model compound study of the mitigative effect of crude oil on pipeline corrosion10.5006/0631 ↗
5. The effect of type of oil or gas condensate on carbonic acid corrosion10.5006/1.3585301 ↗
6. De Waard · 2003 · 03629
7. Effect of hydrocarbons on the internal corrosion of oil and gas pipelines10.5006/1.3278419 ↗
8. Kanwar · 1994
9. Jepson · 1995 · 106
10. Smart · 1993 · 70
11. Corrosion in oi/water systems
12. Efird · 2004 · 04366
13. Predicting the conductivity of water-in-oil solutions as a means to estimate corrosiveness10.5006/1.3287645 ↗
14. Corrosion of multiphase flow pipelines: the impact of crude oil10.1515/corrrev-2015-0053 ↗
15. De Waard · 1993 · 69
16. Emulsification reducing the corrosion risk of mild steel in oil-brine mixtures10.1016/j.corsci.2014.06.009 ↗
17. Schmitt · 1998 · 28
18. Experimental study of water wetting in oil–water two phase flow—horizontal flow of model oil10.1016/j.ces.2012.01.014 ↗
19. Li · 2006 · 06595
20. Managing internal corrosion of mild steel pipelines in CO2 enhanced oil recovery multiphase flow conditions10.1002/ente.201402159 ↗
21. Electrochemical corrosion probe for high resistivity hydrocarbon/water mixtures10.5006/1.3584980 ↗
22. Comparative analysis of potential, current, and electrolyte resistance fluctuations in two-phase Oil/Water mixtures10.5006/1.3277603 ↗
23. Corrosion of AISI 1020 steel in crude oil studied by the electrochemical noise measurements10.1016/j.fuel.2015.02.022 ↗
24. ASTM · 2010
25. How do inhibitors mitigate corrosion in oil-water two-phase flow beyond lowering the corrosion rate?10.5006/1057 ↗
26. Horizontal rotating cylinder-A compact apparatus for studying the effect of water wetting on carbon dioxide corrosion of mild steel10.5006/1.3277528 ↗
27. Sarica · 2008 · 1
28. Study on oil–water two-phase flow in horizontal pipelines10.1016/j.petrol.2007.03.002 ↗
29. Carbon dioxide corrosion of L80 grade tubular in flowing oil-brine two-phase environments10.5006/1.3585005 ↗
30. Schmitt · 2000 · 00049
31. Nonlinear dynamic analysis of large diameter inclined oil-water two phase flow pattern10.1016/j.ijmultiphaseflow.2009.11.006 ↗
32. Flow structure and pressure gradient of extra heavy crude oil-water two phase flow10.1016/j.expthermflusci.2016.11.015 ↗
33. Rotating disk electrodes10.1016/S0022-0728(76)80129-5 ↗
34. Relationship between rotating disk corrosion measurements and corrosioin in pipe flow10.5006/1.3293529 ↗
35. The rotating cylinder electrode for studies of corrosion engineering and protection of metals - an illustrated review10.1016/j.corsci.2017.03.024 ↗
36. Chemical analysis of the initial corrosion layer on pipeline steels in simulated CO2-enhanced oil recovery brines10.1016/j.corsci.2012.08.045 ↗
37. Electrochemical response of mild steel in ferrous ion enriched and CO2 saturated solutions10.1016/j.corsci.2015.03.015 ↗
38. Corrosion of artificial rock layer covered steel electrodes in a CO2 environment: the influence of permeability10.1016/j.corsci.2016.01.017 ↗
39. CO2 corrosion inhibition of X-120 pipeline steel by a modified imidazoline under flow conditions10.1016/j.corsci.2011.07.028 ↗
40. On the fundamentals of electrochemical corrosion of X65 steel in CO2-containing formation water in the presence of acetic acid in petroleum production10.1016/j.corsci.2008.10.013 ↗
41. Effect of flow velocity and entrained sand on inhibition performances of two inhibitors for CO2 corrosion of N80 steel in 3% NaCl solution10.1016/j.corsci.2004.11.012 ↗
42. Effects of multiphase flow on internal CO2 corrosion of mild steel pipelines10.1021/ef3002795 ↗
43. Carbon-steel corrosion in multiphase slug flow and CO210.1016/j.corsci.2005.09.003 ↗
44. A dynamic Wilhelmy plate technique used for wettability evaluation of crude oils10.1016/0021-9797(88)90167-1 ↗
45. An electrochemical study of flow instability on a rotating disk10.1017/S0022112072000904 ↗
46. Absolute instability of the boundary layer on a rotating disk10.1017/S0022112095003405 ↗
47. Fluid flow effects on CO2 corrosion resistance of oil well materials10.5006/1.3316070 ↗
48. Experimental testing and numerical simulation to analyze the corrosion failures of single well pipelines in Tahe oilfield10.1016/j.engfailanal.2017.06.014 ↗
49. Electrochemical corrosion of X65 pipe steel in oil/water emulsion10.1016/j.corsci.2009.01.020 ↗
50. Computational fluid dynamics study of solids deposition in heavy oil transmission pipeline10.5006/0444 ↗
51. Crude-oil emulsions: a stat-of-the-art review10.2118/77497-PA ↗
52. Similarity of the effect of different dissolved gases on heavy-oil viscosity
53. Carew · 2000 · 00061
54. Microstructure analysis of coupons exposed to carbon dioxide corrosion in multiphase flow10.5006/1.3284885 ↗
55. Mendez · 2001 · 01030