The effects of replacing Ni with Mn on hydrogen embrittlement in Cr-Ni-Mn-N austenitic steels
Source abstract
Abstract
Abstract Hydrogen embrittlement (HE) in Cr-Ni-Mn-N austenitic stainless steels was investigated when Ni was replaced with the equivalent Mn concentration while maintaining a constant Ni equivalent Nieq. Although Ni and Mn have similar effects on Nieq, the tendency for strain-induced martensite (SIM) transformation and H redistribution was controlled by stacking fault energy, which depended on the relative concentrations of Ni and Mn, and on the degree of H pre-charging. H transport along dislocations caused H2 out-gassing during deformation, and H trapping at austenite/SIM interfaces increased HE. Replacing Ni with Mn reduced the stability of austenite and increased the HE susceptibility.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Effects of deformation on hydrogen permeation in austenitic stainless steels10.1016/0001-6160(86)90123-9 ↗
2. Hydrogen transport in austenitic stainless steel10.1016/0010-938X(75)90022-0 ↗
3. Influence of plastic deformation on hydrogen diffusion and permeation in stainless steels10.1016/0001-6160(89)90211-3 ↗
4. Permeability, solubility and diffusivity of hydrogen isotopes in stainless steels at high gas pressures10.1016/j.ijhydene.2006.05.008 ↗
5. A new aspect on intergranular hydrogen embrittlement mechanism of solution annealed types 304, 316 and 310 austenitic stainless steels10.1016/j.corsci.2009.01.031 ↗
6. The effect of pre-straining and δ-ferrite on the embrittlement of 304L stainless steel by hydrogen10.1016/0010-938X(93)90261-E ↗
7. Effect of alloying elements on hydrogen environment embrittlement of AISI type 304 austenitic stainless steel10.1016/j.ijhydene.2011.09.013 ↗
8. Analysis of martensitic transformation in 304 type stainless steels tensile tested in high pressure hydrogen atmosphere by means of XRD and magnetic induction10.1016/j.ijhydene.2011.11.080 ↗
9. Hydrogen environment embrittlement testing at low temperatures and high pressures10.1016/j.corsci.2008.09.025 ↗
10. Hydrogen embrittlement of catholically hydrogen-precharged 304L austenitic stainless steel: effect of plastic pre-strain10.1016/j.ijhydene.2014.04.122 ↗
11. Characterization of hydrogen-induced crack initiation in metastable austenitic stainless steels during deformation
12. Determination of hydrogen compatibility for solution-treated austenitic stainless steels based on a newly proposed nickel-equivalent equation10.1016/j.ijhydene.2016.06.193 ↗
13. Effect of nickel equivalent on hydrogen gas embrittlement of austenitic stainless steels based on type 316 at low temperatures10.1016/j.actamat.2008.03.022 ↗
14. Abnormal effect of nitrogen on hydrogen gas embrittlement of austenitic stainless steels at low temperatures10.1016/j.ijhydene.2016.06.100 ↗
15. Modified Ni equivalent for evaluating hydrogen susceptibility of Cr-Ni based austenitic stainless steels10.1016/j.jallcom.2016.12.061 ↗
16. Reaction kinetics in differential thermal analysis10.1021/ac60131a045 ↗
17. Hydrogen uptake in austenitic stainless steels by exposure to gaseous hydrogen and its effect on tensile deformation10.1016/j.corsci.2011.04.022 ↗
18. Suryanarayana · 1998
19. Deformation microstructure and deformation-induced martensite in austenitic Fe-Cr-Ni alloys depending on stacking fault energy10.1007/s11661-016-3839-2 ↗
20. Comparing the deformation-induced martensitic transformation with the athermal martensitic transformation in Fe-Cr-Ni alloys10.1016/j.jallcom.2018.06.326 ↗
21. On the origin of deformation microstructures in austenitic stainless steel: part II—mechanisms10.1016/S1359-6454(01)00194-X ↗
22. Different effects of Ni and Mn on thermodynamic and mechanical stabilities in Cr-Ni-Mn austenitic steels10.1007/s11661-018-5042-0 ↗
23. Correlation between stacking fault energy and deformation microstructure in high-interstitial-alloyed austenitic steels10.1016/j.actamat.2010.01.056 ↗
24. Effects of high-pressure hydrogen charging on the structure of austenitic stainless steels10.1016/S0921-5093(04)00822-6 ↗
25. Hydrogen-induced phase transformation in a high nitrogen austenitic stainless steel10.1016/S0010-938X(98)00134-6 ↗
26. Hydrogen embrittlement associated with phase transformation (Appendix : assessment of the susceptibility to hydrogen-related failure)
27. X-ray phase analysis of martensitic transformations in austenitic stainless steels electrochemically charged with hydrogen10.1016/j.msea.2006.07.140 ↗
28. Fukai · 2005
29. Martensite transformation and surface cracking of hydrogen charged and outgassed type 304 stainless steel10.1016/S0921-5093(00)00833-9 ↗
30. Hydrogen-related phase transformations in austenitic stainless steels10.1007/BF02642872 ↗
31. Stress distributions due to hydrogen concentrations in electrochemically charged and aged austenitic stainless steel10.1016/j.corsci.2008.08.045 ↗
32. Phase relations in the hydrogen-austenite system10.1016/0956-7151(93)90393-7 ↗
33. A concept for development of hydrogen-resistant austenitic steels
34. The effect of hydrogen on the electronic structure and phase stability of iron-based alloys doped with chromium and nickel10.1088/0953-8984/10/31/014 ↗
35. Influence of hydrogen on the stacking-fault energy of an austenitic stainless steel10.4028/www.scientific.net/MSF.207-209.93 ↗
36. X-Ray diffraction measurement of the stacking fault energy reduction induced by hydrogen in an AISI 304 steel10.1016/S1359-6462(97)00332-1 ↗
37. The trapping and transport phenomena of hydrogen in nickel10.1007/BF02643893 ↗
38. Hydrogen trapping in FCC metals
39. Hydrogen permeation behavior in metastable austenitic stainless steels 321 and 30410.1016/0001-6160(89)90142-9 ↗
40. Effect of surface hydrogen concentration on hydrogen embrittlement properties of stainless steels and Ni based alloys10.2355/isijinternational.ISIJINT-2015-268 ↗
41. Failure mechanism transition of hydrogen embrittlement in AISI 304 K-TIG weld metal under tensile loading10.1016/j.corsci.2017.10.032 ↗
42. A SIMS study of the diffusion and trapping of deuterium in 302 stainless steel10.1007/BF02644422 ↗
43. The effect of carbon on hydrogen embrittlement in stable Cr-Ni-Mn-N austenitic stainless steels10.1016/j.corsci.2017.05.004 ↗
44. Hydrogen-enhanced localized plasticity—a mechanism for hydrogen-related fracture10.1016/0921-5093(94)90975-X ↗
45. Hydrogen effects on dislocation activity in austenitic stainless steel10.1016/j.actamat.2006.02.007 ↗
46. First principles assessment of ideal fracture energies of materials with mobile impurities: implications for hydrogen embrittlement of metals10.1016/j.actamat.2004.06.037 ↗
47. Hydrogen trapping in some advanced high strength steels10.1016/j.corsci.2016.05.046 ↗
48. Hydrogen embrittlement susceptibility of Fe-Mn binary alloys with high Mn content: effects of stable and metastable ε-martensite, and Mn concentration10.1007/s11661-016-3431-9 ↗
49. HVEM studies of the effects of hydrogen on the deformation and fracture of AISI type 316 austenitic stainless steel10.1016/0956-7151(90)90070-W ↗
50. Premature fracture mechanism in an Fe-Mn-C austenitic steel10.1007/s11661-012-1220-7 ↗
51. Hydrogen-assisted failure in a twinning-induced plasticity steel studied under in situ hydrogen charging by electron channeling contrast imaging10.1016/j.actamat.2013.04.030 ↗