Sensing electrochemical activity in polymer-coated metals during the early stages of coating degradation by means of the scanning vibrating electrode technique
Source abstract
Abstract
Application of scanning vibrating electrode technique (SVET) for corrosion studies of organic coatings on reactive metals is presented. SVET was used to monitor the electrochemical processes at painted steel immersed in either 10 mM Na2SO4 or 10 mM NaCl aqueous solutions. The coated samples were investigated after a scratch was operated through the polymer matrix down to the metal–substrate surface in order to simulate a defect across the coating. SVET imaging probes that the electrochemical behaviour of the system is different depending on the electrolyte employed. Enhanced coating delamination originating from the defect is observed when chloride ions are present in the environment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrochemical Analysis and Applications · Analytical Chemistry and Sensors · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Paints and varnishes – Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens. ISO 16773 norm. International Organization for Standardization, Geneva, 2007–2009.
2. Electrochemical impedance spectroscopy
3. Corrosion protection by organic coatings
4. Application of scanning Kelvin probe in corrosion science
5. High-resolution Kelvin probe microscopy in corrosion science. Scanning Kelvin probe force microscopy (SKPFM) versus classical scanning Kelvin probe (SKP)10.1016/j.electacta.2007.03.016 ↗
6. Localized electrochemical techniques: theory and practical examples in corrosion studies10.1016/j.crci.2008.06.011 ↗
7. Recent evaluation of corrosion protective paint films by electrochemical methods10.1016/S0300-9440(97)00020-9 ↗
8. 2007
9. Lillard · 2006 · 571
10. Delaminated areas beneath organic coating: a local electrochemical impedance approach10.1016/j.corsci.2005.05.031 ↗
11. Localized EIS characterization of corrosion of steel at coating defect under cathodic protection10.1016/j.electacta.2008.07.016 ↗
12. Application of the scanning electrochemical microscope to the examination of organic coatings on metallic substrates10.1016/j.porgcoat.2005.02.005 ↗
13. Investigation of localized catalytic and electrocatalytic processes and corrosion reactions with scanning electrochemical microscopy (SECM)10.1524/zpch.2008.5426 ↗
14. Application of scanning electrochemical microscope in the study of corrosion of metals10.1007/s10853-009-3654-x ↗
15. Scanning electrochemical microscopy for the investigation of localized degradation processes in coated metals10.1016/j.porgcoat.2010.04.006 ↗
16. Damage to paint coatings caused by electrolyte immersion as observed in situ by scanning electrochemical microscopy10.1016/j.corsci.2004.06.002 ↗
17. Evaluation of the corrosion performance of coil-coated steel sheet as studied by scanning electrochemical microscopy10.1016/j.corsci.2008.02.019 ↗
18. Characterization of coating systems by scanning electrochemical microscopy: surface topology and blistering10.1016/j.porgcoat.2009.03.008 ↗
19. Imaging the origins of coating degradation and blistering caused by electrolyte immersion assisted by SECM10.1002/elan.200900262 ↗
20. Examination of organic coatings on metallic substrates by scanning electrochemical microscopy in feedback mode: revealing the early stages of coating breakdown in corrosive environments10.1016/j.corsci.2009.10.035 ↗
21. In situ monitoring of electroactive species by using the scanning electrochemical microscope. A application to the investigation of degradation processes at defective coated metals10.1016/j.corsci.2005.07.005 ↗
22. SVET and SECM imaging of cathodic protection of aluminium by a Mg-rich coating10.1016/j.corsci.2007.03.045 ↗
23. SECM imaging of interfacial processes in defective organic coatings applied on metallic substrates using oxygen as redox mediator10.1002/elan.200900232 ↗
24. Quantitative assessment of localized corrosion occurring on galvanized steel samples using the scanning vibrating electrode technique10.5006/1.3299239 ↗
25. Determination of localised corrosion mechanisms using a scanning vibrating reference electrode technique10.1039/a704530a ↗
26. Localized electrochemical methods applied to cut edge corrosion10.1149/1.1393954 ↗
27. A scanning vibrating electrode study of chromated-epoxy primer on steel and aluminum10.1149/1.1393955 ↗
28. Mechanistic changes in cut-edge corrosion induced by variation of organic coating porosity10.1016/S0010-938X(01)00026-9 ↗
29. Real time mapping of corrosion activity under coatings10.1016/S0300-9440(01)00141-2 ↗
30. Observation of self-healing functions on the cut edge of galvanized steel using SVET and pH microscopy10.1149/1.2126577 ↗
31. Investigation into the effects of metallic coating thickness on the corrosion properties of Zn–Al alloy galvanising coatings10.1016/j.corsci.2006.07.006 ↗
32. The use of multiple electrochemical techniques to characterize Mg-rich primers for Al alloys10.1016/j.porgcoat.2007.01.022 ↗
33. On the application of electrochemical impedance spectroscopy to study the self-healing properties of protective coatings10.1016/j.elecom.2007.08.012 ↗
34. Investigation of self-healing mechanism on galvanized steels cut edges by coupling SVET and numerical modeling10.1016/j.electacta.2008.02.066 ↗
35. Corrosion inhibition at galvanized steel cut edges by phosphate pigments10.1016/j.electacta.2009.01.065 ↗
36. Self-healing processes in coil-coated cladding studied by the scanning vibrating electrode10.1016/j.electacta.2010.03.008 ↗
37. Resistance to corrosion of galvanized steel covered with an epoxy-polyamide primer coating10.1016/S0300-9440(01)00139-4 ↗
38. Laboratory evaluation of corrosion resistance at metallic substrates by an organic coating: delamination effects10.1163/156856104323016351 ↗
39. Coil-coated steel: corrosion resistance and adhesion as a function of the composition of the intermediate galvanic layer10.1163/156856105774429082 ↗
40. Comparative EIS study of different Zn-based intermediate metallic layers in coil-coated steels10.1016/j.corsci.2005.05.006 ↗
41. Investigation of the corrosion resistance characteristics of pigments in alkyd coatings on steel10.1016/S0300-9440(01)00210-7 ↗
42. Resistance of metallic substrates protected by an organic coating containing aluminium powder10.1016/S0300-9440(03)00021-3 ↗
43. Resistance of metallic substrates protected by an organic coating containing glass flakes10.1016/j.porgcoat.2010.01.005 ↗
44. Electrochemical impedance spectroscopy of protective coatings10.1002/maco.19850361102 ↗
45. Use of electrochemical impedance spectroscopy for the study of corrosion protection by polymer coatings10.1007/BF00262955 ↗
46. J.A. González-Guzmán, Protección frente a la corrosión metálica con recubrimientos poliméricos, Doctoral Thesis, University of La Laguna, Spain, 2010, (chapter 5).
47. Investigating corrosion processes in the micrometric range: a SVET study of the galvanic corrosion of zinc coupled with iron10.1016/j.corsci.2007.04.016 ↗
48. Corrosion inhibition by chromate and phosphate extracts for iron substrates studied by EIS and SVET10.1016/j.corsci.2005.05.021 ↗
49. Visualization of local degradation processes in coated metals by means of scanning electrochemical microscopy in the redox competition mode10.1016/j.electacta.2010.02.091 ↗