The effects of particle angularity on low-stress three-body abrasion-corrosion of 316L stainless steel
Source abstract
Abstract
Abstract This study investigates the effects of particle angularity on the tribo-electrochemical behaviour of 316L stainless steel under low-stress three-body abrasion–corrosion conditions. Different angularity particles were delivered to the interface between the samples and a rotating rubber counterface, while changes in current with time were potentiostatically monitored. Based on a linear relationship existed between tribological factors (load and speed) and the average current evolved, an empirical correlation is proposed and possible underlying mechanisms are discussed. The effects of particle angularity on the surface and sub-surface damage are also demonstrated. It was found that increasing particle angularity improved their depassivation efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Passivity of austenitic stainless steels
2. Passive films on stainless steels: chemistry, structure and growth10.1016/S0013-4686(02)00841-1 ↗
3. XPS investigations of electrochemically formed passive layers on Fe/Cr-alloys in 0.5 M H2SO410.1016/j.corsci.2004.01.007 ↗
4. Composition changes around sulphide inclusions in stainless steels, and implications for the initiation of pitting corrosion10.1016/j.corsci.2010.07.021 ↗
5. Chloride interactions with the passive films on stainless steel10.1149/1.3520000 ↗
6. Influence of the dissolution of MnS inclusions under free corrosion and potentiostatic conditions on the composition of passive films and the electrochemical behaviour of stainless steels10.1016/j.electacta.2005.09.015 ↗
7. Passivity breakdown and stress corrosion cracking of stainless steel10.1016/j.corsci.2006.05.031 ↗
8. Effect of impact angle on the slurry erosion–corrosion of 304L stainless steel10.1016/S0043-1648(00)00344-6 ↗
9. Mechanical measurements of passive film fracture on an austenitic stainless steel10.1007/s11661-003-0240-8 ↗
10. Tribocorrosion
11. Tribocorrosion of passive metals and coatings
12. An electrochemical noise study of tribocorrosion processes of AISI 304L in Cl− and SO42− media10.1088/0022-3727/39/15/S08 ↗
13. Triboelectrochemical techniques and interpretation methods in tribocorrosion: a comparative evaluation10.1016/j.triboint.2007.11.003 ↗
14. The generation of surface roughness during slurry erosion-corrosion and its effect on the pitting potential10.1016/S0010-938X(96)00066-2 ↗
15. Electrochemical techniques for studying tribocorrosion processes10.1016/S0043-1648(03)00556-8 ↗
16. Electrochemical noise analysis of tribocorrosion processes under steady-state friction regime10.5006/1.3279910 ↗
17. On the construction of micro-abrasion maps for a steel/polymer couple in corrosive environments10.1016/j.triboint.2005.02.013 ↗
18. Abrasive size and concentration effects on the tribo-corrosion of cast CoCrMo alloy in simulated body fluids10.1016/j.triboint.2009.03.018 ↗
19. New experimental rig to investigate abrasive–corrosive characteristics of metals in aqueous media10.1007/s11249-010-9640-2 ↗
20. Effect of particle velocity and impact angle on the corrosion–erosion of AISI 304 and AISI 420 stainless steels10.1016/j.wear.2005.02.032 ↗
21. Impact angle effects on the transition boundaries of the aqueous erosion–corrosion map10.1016/S0043-1648(99)00050-2 ↗
22. Single particle impact experiments for studying particle induced flow corrosion10.1016/j.corsci.2006.05.021 ↗
23. Observation of a threshold impact energy required to cause passive film rupture during slurry erosion of stainless steel10.1080/09500830050057198 ↗
24. Erosion–corrosion of chromium steel in a rotating cylinder electrode system: some comments on particle size effects10.1016/S0043-1648(03)00565-9 ↗
25. A systematic erosion–corrosion study of two stainless steels in marine conditions via experimental design10.1016/j.wear.2006.12.007 ↗
26. Evaluation of a semi-empirical model in predicting erosion–corrosion10.1016/j.wear.2009.03.002 ↗
27. Particle concentration and size effects on the erosion-corrosion of pure metals in aqueous slurries10.1016/j.triboint.2012.04.010 ↗
28. The effect of erodent particle hardness on the erosion of stainless steel10.1016/j.wear.2015.01.017 ↗
29. Erosion and erosion-corrosion of metals10.5006/1.3293564 ↗
30. Electrochemical methods in tribocorrosion: a critical appraisal10.1016/S0013-4686(01)00679-X ↗
31. Tribo-electrochemical impedance: a new technique for mechanistic study in tribocorrosion10.1016/j.electacta.2013.08.186 ↗
32. Tribocorrosion of 316L stainless steel and TA6V4 alloy in H2SO4 media10.1016/j.corsci.2009.03.015 ↗
33. Corrosion and wear of 304 stainless steel using a scratch test10.1016/0010-938X(92)90189-A ↗
34. Synergistic effects of micro-abrasion–corrosion of UNS S30403, S31603 and S32760 stainless steels10.1016/j.wear.2006.12.044 ↗
35. Micro-abrasion-corrosion maps of 316L stainless steel in artificial saliva
36. Tribo-electrochemical behaviour of 316L stainless steel: the effects of contact configuration, tangential speed, and wear mechanism10.1016/j.corsci.2015.05.009 ↗
37. Three-body tribocorrosion of high-chromium cast irons in neutral and alkaline environments10.1016/j.wear.2011.01.066 ↗
38. Abrasive wear mechanisms and the grit size effect10.1016/0043-1648(79)90188-1 ↗
39. Assessing the role of particle shape and scale in abrasion using sharpness analysis Part II. Technique evaluation10.1016/S0043-1648(02)00233-8 ↗
40. Description of abrasive particle shape and its relation to two-body abrasive wear10.1080/10402009608983598 ↗
41. Particle angularity and its relationship to abrasive and erosive wear10.1016/S0043-1648(00)00378-1 ↗
42. Wear mechanisms
43. Stachowiak · 2013
44. Platinum as a reference electrode in electrochemical measurements10.1595/147106708X297855 ↗
45. Handbook of Reference Electrodes
46. Nature of the passive film on Fe-Cr alloys as studied by 18O secondary ion mass spectrometry: reduction of the prior film and stability to ex situ surface analysis10.1039/FT9918701011 ↗
47. The effect of contact configuration on the tribocorrosion of stainless steel in reciprocating sliding under potentiostatic control10.1016/S0010-938X(02)00136-1 ↗
48. The effect of mechanical and electrochemical parameters on the tribocorrosion rate of stainless steel in sulphuric acid10.1016/S0043-1648(03)00085-1 ↗
49. Electrochemical modeling of passivation phenomena in tribocorrosion10.1016/S0043-1648(99)00314-2 ↗
50. Investigation of erosion–corrosion mechanisms of UNS S31603 using FIB and TEM10.1016/j.triboint.2011.05.012 ↗
51. A study on the evolution of surface and subsurface wear of UNS S31603 during erosion–corrosion10.1016/j.wear.2010.11.018 ↗
52. EBSD, SEM and FIB characterisation of subsurface deformation during tribocorrosion of stainless steel in sulphuric acid10.1016/j.wear.2010.04.023 ↗
53. Pitting corrosion of 304ss nanocrystalline thin film10.1016/j.corsci.2013.03.022 ↗
54. The influence of nanocrystalline structure and processing route on corrosion of stainless steel: a review10.1016/j.corsci.2014.11.041 ↗
55. Electrochemical characteristics of nano and microcrystalline Fe–Cr alloys10.1007/s10853-012-6529-5 ↗
56. Mechanical and electrochemical behavior of nanocrystalline surface of 304 stainless steel10.1016/S0013-4686(02)00365-1 ↗