Ex-situ observation on the dissolution behaviour of Ni–16Cr–15Mo and Ni–30Co–16Cr–15Mo alloys in hydrofluoric acid
Source abstract
Abstract
Abstract Ex-situ observation by laser microscopy was used to investigate the effect of plastic deformation induced by a micro-hardness tester on the corrosion resistance of both Ni–16Cr–15Mo–6Fe–0.5Si (NiCrMo) and Ni–30Co–16Cr–15Mo–6Fe–0.5Si (NiCoCrMo) alloys during immersion in hydrofluoric acid. This found that although the indentation in NiCrMo became slightly deeper and broader following immersion, this effect was far more pronounced with NiCoCrMo. Growth observed in the size of voids is attributed to preferential dissolution of SiO2 particles, as well as an accumulation of dislocations and other defects around them, with these defects also playing a key role in the subsequent coalescence of voids on the sample surface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. New understanding of the effect of hydrostatic pressure on the corrosion of Ni–Cr–Mo–V high strength steel10.1016/j.corsci.2013.04.013 ↗
2. Oxyanions as inhibitors of chloride-induced crevice corrosion of alloy 2210.1016/j.corsci.2012.10.037 ↗
3. Effect of water drops on the oxidation mechanisms of a ceria coated nickel-based superalloy10.1016/j.corsci.2012.11.010 ↗
4. Quantitative assessment of intergranular damage due to PWR primary water exposure in structural Ni-based alloys10.1016/j.corsci.2012.09.048 ↗
5. Investigating the effect of aging on transpassive behavior of Ni-based alloys in sulfuric acid with shell-isolated nanoparticle enhanced Raman spectroscopy (SHINERS)10.1016/j.corsci.2012.10.002 ↗
6. Influence of the grain orientation spread on the pitting corrosion resistance of duplex stainless steels using electron backscatter diffraction and critical pitting temperature test at the microscale10.1016/j.corsci.2012.11.013 ↗
7. The influence of microstructure on the protective properties of the corrosion product layer generated on the welded API X70 steel in chloride solution10.1016/j.corsci.2013.01.026 ↗
8. Facile chromaticity approach for the inspection of passive films on austenitic stainless steel10.1016/j.corsci.2013.01.035 ↗
9. An electrochemical impedance spectroscopic study of the passive state on alloy 2210.1016/j.electacta.2005.02.103 ↗
10. The impedance properties of the oxide film on the Ni–Cr–Mo alloy-22 in neutral concentrated sodium chloride solution10.1016/j.electacta.2010.07.064 ↗
11. Competitive effects of metal dissolution and passivation modulated by surface structure: an AFM and EBSD study of the corrosion of alloy 2210.1016/j.susc.2006.04.002 ↗
12. Corrosion behaviour of nickel alloys in wet hydrofluoric acid10.1002/1521-4176(200104)52:4<289::AID-MACO289>3.0.CO;2-0 ↗
13. Corrosion resistance of nickel-containing alloys in hydrofluoric acid, hydrogen fluoride, and fluorine, Inco Corrosion Engineering Bulletin No. 5, International Nickel Co., Inc, New York, 1968.
14. Corrosion of high alloy materials in aqueous hydrofluoric acid environments10.5006/1.3293488 ↗
15. Effects of partially substituting cobalt for nickel on the corrosion resistance of a Ni–16Cr–15Mo alloy to aqueous hydrofluoric acid10.1016/j.corsci.2013.09.004 ↗
16. Effects of strain on the corrosion behaviour of X80 steel10.1016/j.corsci.2011.05.011 ↗
17. Effects of cold working degrees on grain boundary characters and strain concentration at grain boundaries in alloy 60010.1016/j.corsci.2010.11.022 ↗
18. The effects of rolling and sensitization treatments on the stress corrosion cracking of 304L stainless steel in salt-spray environment10.1016/j.corsci.2012.10.027 ↗
19. Moayed, pitting corrosion of cold rolled solution treated 17-4 PH stainless steel10.1016/j.corsci.2013.11.039 ↗
20. Characterization of microstructure, local deformation and microchemistry in alloy 600 heat-affected zone and stress corrosion cracking in high temperature water10.1016/j.corsci.2012.01.029 ↗
21. Effect of prior deformation and heat treatment on the corrosion-induced hydrogen trapping in aluminium alloy 202410.1016/j.corsci.2013.11.021 ↗
22. Corrosion of cold-deformed brass in acid sulphate solution10.1016/j.corsci.2004.03.010 ↗
23. Dynamic visualization of cavity-filling process in fluid-assisted injection molding-gas versus water10.1016/j.polymertesting.2006.10.008 ↗
24. Fabrication of metal matrix composites by metal injection molding—A review10.1016/j.jmatprotec.2007.10.066 ↗
25. A review and comparative study of release coatings for optimised adhesion in resin transfer moulding applications10.1016/j.ijadhadh.2005.09.003 ↗
26. K. Yanagihara, A. Iwabuki, Y. Li, K. Onmura, X. Fan, A. Chiba, Application of Co–Cr–Mo alloy in screw materials of injection molding process for F-containing resin, JIM Autumn Meeting, Ehime University, Matsuyama, Japan, September 2012.
27. Pin on disk wear behavior in a like-on-like configuration in a biological environment of high carbon cast and low carbon forged Co–29Cr–6Mo alloys10.1016/j.actamat.2006.10.005 ↗
28. Effects of cold working on corrosion resistance of Co-modified alloy Ni–16Cr–15Mo to hydrofluoric acid10.1016/j.corsci.2014.09.004 ↗
29. Corrosion resistance of Cu- and Fe-modified Ni–30Co–16Cr–15Mo alloy in aqueous hydrofluoric acid10.1016/j.corsci.2014.08.010 ↗
30. SiO2 etching with aqueous HF: design and development of a laboratory-scale integrated wet etch/dry reactor10.1109/TSM.2010.2085457 ↗
31. Cu–Ti–C alloy with high strength and high electrical conductivity prepared by two-step ball-milling processes10.1016/j.matdes.2014.04.034 ↗
32. Influence of two-step ball-milling condition on electrical and mechanical properties of TiC-dispersion-strengthened Cu alloys10.1016/j.matdes.2014.08.027 ↗