Ablation behaviour and mechanical property of the B-modified SiC/HfC-SiC composites in cyclic ablation environment
Source abstract
Abstract
Abstract The B-modified SiC/HfC-SiC composites were prepared by the combination of precursor infiltration and pyrolysis (PIP) and chemical vapor deposition (CVD) methods. The microstructure, cyclic ablation and bending strength tests of the SiC/HfC-SiC composites with and without B were investigated. The results showed that the B-modified composites had a better cyclic ablation resistance than that of the composites without B. The effective residual thickness of the B-modified composites was also higher than that of the composites without B after cyclic ablation. The residual bending strength of the B-modified composites was slightly lower than that of the composites without B.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Boron and Carbon Nanomaterials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Recent advances in the development of aerospace materials10.1016/j.paerosci.2018.01.001 ↗
2. Thermo-structural design of ZrB2-SiC-based thermal protection system for hypersonic space vehicles10.1111/jace.14750 ↗
3. Ultra-high-temperature ablation behavior of SiC-ZrC-TiC modified carbon/carbon composites fabricated via reactive melt infiltration10.1016/j.jeurceramsoc.2019.10.027 ↗
4. Long-term oxidation behaviors of C/SiC composites with a SiC/UHTC/SiC three-layer coating in a wide temperature range10.1016/j.corsci.2018.10.017 ↗
5. Oxidation resistance of SiCf/SiC composites with a PyC/SiC multilayer interface at 500 ℃ to 1100 ℃10.1016/j.corsci.2020.108522 ↗
6. Creep and fatigue behavior in an enhanced SiC/SiC composite at high temperature10.1111/j.1151-2916.1998.tb02621.x ↗
7. Interfacial modification and cyclic ablation behaviors of a SiC/ZrB2-SiC/SiC triple-layer coating for C/SiC composites at above 2000 °C10.1016/j.corsci.2020.108604 ↗
8. Enhancement of oxidation resistance of CVD SiC coated Cf/C-SiC hybrid composite tubes processed through Si-infiltration10.1016/j.jallcom.2020.154107 ↗
9. MoSi2-modified Cf/SiC composites with enhanced mechanical performance and oxidation resistance10.1016/j.corsci.2018.11.007 ↗
10. Ablation behaviors of ultra-high temperature ceramic composites10.1016/j.msea.2007.02.040 ↗
11. Comparison of ZrB2-SiC, HfB2-SiC and HfB2-SiC-Y2O3 oxidation mechanisms in air using LIF of BO2(g)10.1016/j.corsci.2019.108278 ↗
12. Effect of HfC addition on ablation behavior of SiBCN ceramics10.1016/j.ceramint.2019.10.121 ↗
13. Ablation mechanism of HfC-HfO2 protective coating for SiC-Coated C/C composites in an oxyacetylene torch environment10.1016/j.jmst.2016.11.010 ↗
14. Reviewer research progress on ultra-high temperature ceramic composites10.1360/N972014-00456 ↗
15. Investigating the highest melting temperature materials: a laser melting study of the TaC-HfC system10.1038/srep37962 ↗
16. Phase diagram of the Al2O3-HfO2-Y2O3 system10.1016/j.jeurceramsoc.2010.04.041 ↗
17. Effect of high temperature oxidation on the radiative properties of HfC-based ceramics10.1016/j.corsci.2017.07.007 ↗
18. Microstructure, thermophysical properties, and ablation resistance of C/HfC-ZrC-SiC composites10.1016/j.ceramint.2018.11.160 ↗
19. Rapid oxidation characterization of ultra-high temperature ceramics10.1111/j.1551-2916.2007.01861.x ↗
20. Ablation behavior of a novel HfC-SiC gradient coating fabricated by a facile one-step chemical vapor co-deposition10.1016/j.jeurceramsoc.2018.05.034 ↗
21. Nonstoichiometry, diffusion, and electrical conductivity in binary metal oxides
22. Effect of Hf and B incorporation on the SiOC precursor architecture and high-temperature oxidation behavior of SiHfBOC ceramics10.1016/j.jeurceramsoc.2019.09.026 ↗
23. Ablation behavior and mechanism of C/ZrC, C/ZrC-SiC and C/SiC composites fabricated by polymer infiltration and pyrolysis process10.1016/j.corsci.2014.05.005 ↗
24. High temperature creep of 20 vol%. SiC-HfB2 UHTCs up to 2000℃ and the effect of La2O3 addition10.1016/j.jeurceramsoc.2017.08.028 ↗
25. Ablation behavior of C/SiC-HfC composites in the plasma wind tunnel10.1016/j.jeurceramsoc.2016.03.017 ↗
26. Fabrication and properties of Cf/ZrC-SiC-based composites by an improved reactive melt infiltration10.1111/jace.15534 ↗
27. Properties of the low oxygen content SiC fiber on high temperature heat treatment10.1002/9780470313831.ch7 ↗
28. A New Assistant Method for Characterizing Ablation Resistance of ZrC-SiC Dispersive Biphasic Coating on C/C Composites10.3390/coatings9110735 ↗
29. National Standard Committee of China · 1996
30. International Standard, ISO14704 · 2016
31. The effect of Zirconium carbide on ablation of carbon/carbon composites under an oxyacetylene flame10.1016/j.corsci.2010.09.028 ↗