Evaluation of the splats properties and relation with droplets diameters in atomization process using a De Laval Nozzle
Source abstract
Abstract
Properties of the powders developed during atomization process are essentially determined by process parameters. Experiments based on splat collection have been performed at different stages of the process evolution. Formation of splat formed as a result of impingement of the melted metallic droplets onto a substrate was studied. Splat characteristics have been determined from image analysis in function of process parameters and time progress. Droplet diameters were measured using laser Coulter analyzer. Direct relationships between splat diameter and droplet diameter were established. The atomization experiments point out the strong influence of two processing parameters (atomizing gas and melt nozzle diameter) on splat characteristics and particle size. It has been observed that increasing atomizing pressure leads to a decrease of mean splat diameter and width of the size distribution. Similar evolution was found for droplet diameter. Moreover, it is clearly shown that increasing melt nozzle diameter induces an increase of both splat diameters and droplet diameters. The results provide a better understanding of the influence of atomization parameters on the size distribution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fluid Dynamics and Heat Transfer · Nanomaterials and Printing Technologies · Electrohydrodynamics and Fluid Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Lagutkin · J. Mater. Sci. Eng. A · 2004 · 383 · 110.1016/j.msea.2004.02.059 ↗
2. Achelis · J. Mater. Sci. Eng. A · 2008 · 477 · 1510.1016/j.msea.2007.07.095 ↗
3. Progress toward understanding of gas atomisation processing physics
4. Lawley · 1992
5. Mates · J. Atom. Sprays · 2005 · 15 · 19
6. Stobik · Sprühkompaktieren/Sprayforming · 2002 · 6 · 65
7. Nanoval atomizing – superior flow design for finer powder
8. Khatim · J. Surf. Coat. Tech. · 2010 · 205 · 117110.1016/j.surfcoat.2010.08.032 ↗
9. Allimant · J. Powder Technol. · 2009 · 190 · 7910.1016/j.powtec.2008.04.071 ↗
10. Anderson · J. Adv. Powder Metall. Part. Mater. · 2004 · 2 · 26
11. Zeoli · J. Comp. Mater. Sci. · 2008 · 43 · 26810.1016/j.commatsci.2007.10.005 ↗
12. Liu · 2000
13. Mullis · J. Mater. Proc. Tech. · 2011 · 211 · 147110.1016/j.jmatprotec.2011.03.020 ↗
14. Characterization of atomized metallic powders using De Laval Nozzle
15. M. Fukumoto, I. Ohgitani, M. Shiba, T. Yasui, Effect of substrate surface change by heating in transition in flattening behavior of thermal sprayed droplets, in: Proceeding of International Thermal Spraying Conference, Osaka, Japan, 2004.10.31399/asm.cp.itsc2005p1382 ↗
16. Madejski · J. Heat Mass Trans. · 1976 · 19 · 100910.1016/0017-9310(76)90183-6 ↗