Hot corrosion behaviour of Al-Si coating in mixed sulphate at 1150 ˚C
Source abstract
Abstract
Abstract Hot corrosion test of Al-Si coating was investigated at 1150 ˚C based on the results reported from previous work which was conducted at 1050 ˚C. It has been observed that the coating failed after 20 h of hot corrosion. When the temperature of hot corrosion reached 1150 ˚C, the dissolution effect of the molten salt to Al2O3 scale was sharply enhanced. Therefore, during hot corrosion, Al-Si coating was not able to generate a protective oxide scale, and the original anti-oxidation and corrosion mechanism of diffusion barrier of Al-Si coating cannot be retained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Corrosion Behavior and Inhibition · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Thermal barrier coatings for gas-turbine engine applications10.1126/science.1068609 ↗
2. Effects of initial oxidation on β phase depletion and oxidation of CoNiCrAlY bond coatings fabricated by warm spray and HVOF processes10.1016/j.surfcoat.2013.01.028 ↗
3. Modeling decohesion of a top-coat from a thermally-growing oxide in a thermal barrier coating10.1016/j.surfcoat.2013.02.005 ↗
4. Columnar suspension plasma sprayed coating microstructural control for thermal barrier coating application10.1016/j.jeurceramsoc.2015.11.018 ↗
5. Oxidation and hot corrosion behavior of Al2O3/YSZ coatings prepared by cathode plasma electrolytic deposition10.1016/j.corsci.2016.03.017 ↗
6. Hot corrosion of arc ion plating NiCrAlY and sputtered nanocrystalline coatings on a nickel-based single-crystal superalloy10.1016/j.corsci.2017.04.004 ↗
7. Preparation and hot corrosion behavior of a NiCrAlY + AlNiY composite coating10.1016/j.jmst.2016.04.017 ↗
8. Hot corrosion behavior of HVOF-sprayed CoNiCrAlYSi coatings in a sulphate environment10.1016/j.vacuum.2015.09.015 ↗
9. Hot corrosion and mechanical properties of nanostructured Al2O3/CSZ composte TBCs10.1080/02670844.2016.1267423 ↗
10. High-temperature corrosion behavior of sputtered K38 nanocrystalline coatings with and without yttrium addition in molten sulfate at 900 ˚C10.1016/j.surfcoat.2011.06.037 ↗
11. Oxidation and hot corrosion behavior of plasma-sprayed MCrAlY-Cr2O3 coatings
12. Hot corrosion behaviour of a Ni + CrAlYSiN composite coating in Na2SO4-25 wt.% NaCl melt10.1016/j.apsusc.2012.12.012 ↗
13. Oxidation and corrosion behaviour of CoNiCrAlY bond coats10.1179/1743294414Y.0000000255 ↗
14. Improved hot corrosion resistance of Y-Ce-Co-modified aluminide coating on nickel base superalloys by pack cementation process10.1016/j.corsci.2014.11.043 ↗
15. Effect of Y2O3 content in the pack on microstructure and hot corrosion resistance of Y-Co-modified aluminide coating10.1016/j.corsci.2014.05.018 ↗
16. Hot corrosion behaviour of single-phase platinum-modified aluminide coatings: effect of Pt content and pre-oxidation10.1016/j.corsci.2017.08.015 ↗
17. Cyclic oxidation and hot corrosion behaviors of gradient CoNiCrAlYSi coatings produced by HVOF and diffusional processes10.1007/s11085-016-9633-0 ↗
18. High temperature corrosion behavior of an AIP NiCoCrAlY coating modified by aluminizing10.1016/j.surfcoat.2011.05.005 ↗
19. Oxidation and hot corrosion of electrodeposited Ni-7Cr-4Al nanocomposite10.1016/S1003-6326(15)63595-6 ↗
20. Hot corrosion behaviour of low Al NiCoCrAlY cladded coatings reinforced by nano-particles on a Ni-base super alloy10.1016/j.corsci.2010.07.011 ↗
21. Investigation on hot corrosion behaviour of Aluminum Rare Earth coating in mixed sulphate at 1050 ˚C10.1016/j.corsci.2018.02.041 ↗
22. Hot corrosion behavior of Al-Si coating in mixed sulphate at 1050 ˚C
23. Micromechanism characteristics of modified Al-Si coating by laser melt injection CeO2 nano-particles10.1016/j.surfcoat.2017.03.071 ↗
24. Microstructure and oxidation resistance of Si modified aluminide coating on TiAl based alloys10.1179/1743294414Y.0000000411 ↗
25. Microstructure and hot corrosion behavior of Co-Si modified aluminide coating on nickel based superalloys10.1016/j.corsci.2015.08.011 ↗
26. Microstructure and hot corrosion behaviors of two Co modified aluminide coatings on a Ni-based superalloy at 700 ˚C10.1016/j.apsusc.2014.05.043 ↗
27. Preparation and hot corrosion behaviour of Pt modified AlSiY coating on a Ni-based superalloy10.1016/j.corsci.2015.12.007 ↗
28. Hot corrosion behavior of low-pressure cold-sprayed CoNiCrAlY coatings10.1007/s11666-016-0381-0 ↗
29. Improved hot corrosion resistance of Dy-Co-modified aluminide coating by pack cementation process on nickel base superalloys10.1016/j.corsci.2016.09.011 ↗
30. Hot corrosion of a single crystal Ni-Base superalloy by Na-Salts at 900 ˚C10.1007/s11085-006-9004-3 ↗
31. Oxidation behaviour of the nickel-based superalloy DZ125 hot-dipped with Al coatings doped by Si10.1016/j.corsci.2016.07.020 ↗