Nanoscale analysis of the influence of pre-oxidation on oxide formation and wetting behavior of hot-dip galvanized high strength steel
Source abstract
Abstract
Abstract Hot-dip galvanized (HDG) 2nd generation advanced high strength steel (AHSS), nano-TWIP (twinning induced plasticity) with 15.8 wt.% Mn, 0.79 wt.% C, was analyzed at the interface between steel and zinc by scanning Auger electron microscopy (AES) in order to confirm and improve an existing model of additional pre-oxidation treatment before annealing and immersion into the hot zinc bath. Furthermore these steel samples were fractured in the analysis chamber of the AES and analyzed without breaking vacuum. In these measurements the results of an aluminothermic reduction of the manganese and iron surface oxides on the steel could be confirmed by AES.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. De Cooman · 2011 · 101
2. De Cooman · 2009
3. High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development — properties — application10.1016/S0749-6419(00)00015-2 ↗
4. Supra-ductile and high-strength manganese-TRIP/TWIP steels for high energy absorption purposes10.2355/isijinternational.43.438 ↗
5. Stress-deformation behaviour of high manganese (AI, Si) TRIP and TWIP steels10.1051/jp4:20020692 ↗
6. Extended tensile ductility of a formable high-performance high-manganese steel
7. L. Samek, S. Tollabimazraehno, E. Arenholz, K. Hingerl, Characterisation of the microstructure of a high-strength manganese steel using different microscopy methods, in: 4th TMP Sheffield, Conference Proceedings, 2012.
8. Ultra high strength FeMn TWIP steels for automotive safety parts10.1051/metal:2005151 ↗
9. Corrosion behavior of two-phase Fe–Mn–Al alloys in 3.5% NaCl solution10.5006/1.3299207 ↗
10. Investigation of the electrochemical corrosion behavior and passive film on Fe–Mn, Fe–Mn–Al and Fe–Mn–Al–Cr alloys in aqueous solution10.5006/1.3284826 ↗
11. Role of copper and aluminum on the corrosion behavior of austenitic Fe–Mn–C TWIP steels in aqueous solutions and the related hydrogen absorption10.1016/j.corsci.2014.02.018 ↗
12. Role of copper and aluminum additions on the hydrogen embrittlement susceptibility of austenitic Fe–Mn–C TWIP steels10.1016/j.corsci.2014.01.022 ↗
13. XPS study of the surface chemistry of conventional hot-dip galvanized pure Zn, galvanneal and Zn–Al alloy coatings on steel10.1016/S1359-6454(03)00408-7 ↗
14. Segregation in hot-dipped galvanized steel10.1002/(SICI)1096-9918(200003)29:3<215::AID-SIA703>3.0.CO;2-X ↗
15. Understanding corrosion via corrosion product characterization: II. Role of alloying elements in improving the corrosion resistance of Zn–Al–Mg coatings on steel10.1016/j.corsci.2011.03.016 ↗
16. In situ infrared reflection spectroscopy studies of the initial atmospheric corrosion of Zn–Al–Mg coated steel10.1016/j.corsci.2013.03.005 ↗
17. Corrosion behaviour of Zn–Al–Mg coated steel sheet in sodium chloride-containing environment10.1016/j.corsci.2009.06.019 ↗
18. Corrosion mechanism of Zn(Mg, Al) coated steel in accelerated tests and natural exposure: 1. The role of electrolyte composition in the nature of corrosion products and relative corrosion rate10.1016/j.corsci.2014.05.014 ↗
19. Initial formation of corrosion products on pure zinc and MgZn2 examined by XPS10.1016/j.corsci.2013.10.029 ↗
20. Effect of carbon dioxide on the atmospheric corrosion of Zn–Mg–Al coated steel10.1016/j.corsci.2013.05.011 ↗
21. Nanoscale surface analysis on second generation advanced high strength steel after hot dip galvanizing10.1007/s00216-013-6801-9 ↗
22. Use of pre-oxidation to improve reactive wetting of high manganese alloyed steel during hot-dip galvanizing10.1016/j.surfcoat.2011.07.088 ↗
23. Reactive wetting during hot-dip galvanizing of high manganese alloyed steel10.1016/j.surfcoat.2010.11.053 ↗
24. Selective oxidation of TWIP steel during continuous annealing10.1002/srin.201100296 ↗
25. R. Kavitha, J. McDermid, Aluminothermic Reduction of Manganese oxides in the continuous galvanizing bath, in: Proc Galvatech ́11, Genua, Italy, 2011
26. Galvannealing of (high-) manganese-alloyed TRIP and X-IP®-steel10.1002/srin.201000115 ↗
27. Wetting force and contact angle measurements to evaluate the influence of zinc bath metallurgy on the galvanizability of high-manganese-alloyed steel10.1016/j.surfcoat.2010.07.123 ↗
28. Nanoscale analysis of surface oxides on ZnMgAl hot-dip-coated steel sheets10.1007/s00216-011-5507-0 ↗
29. X-ray photoelectron spectroscopy of the effects of Ar+ ion sputtering on the nature of some standard compounds of Zn, Cr, and Fe10.1016/j.corsci.2014.01.018 ↗
30. Decomposition of metal oxide films under electron bombardment10.1016/0010-938X(77)90101-9 ↗
31. Effect of annealing atmosphere on the galvanizing behaviour of dual-phase steel10.1016/j.msea.2006.09.116 ↗
32. Studies on wetting behaviour of hot-dip galvanizing process by use of model specimens with tailored surface oxides10.1002/sia.4928 ↗
33. On the in-situ aluminothermic reduction of manganese oxides in continuous galvanizing baths10.1016/j.surfcoat.2012.09.038 ↗
34. The role of surface oxides on annealing high-strength steels in hot dip galvanizing10.1016/j.corsci.2013.01.039 ↗
35. Pawlek · 1983