journal article·2009-08

Influence of flow on the corrosion inhibition of St52-3 type steel by potassium hydrogen-phosphate

H. Ashassi-Sorkhabi, E. Asghari

Corrosion Science· Volume 51· Issue 8
Publisher page

Abstract

Abstract Influence of hydrodynamic conditions on the corrosion of St52-3 type steel rotating disc electrode, RDE, in 3.5% NaCl and its corrosion inhibition using K2HPO4 have been studied. Results showed that by rotating the electrode in blank and inhibited solutions, corrosion current density, icorr, increased, corrosion potential, Ecorr, shifted toward more positive values and charge transfer resistance, Rct, decreased. The inhibition efficiencies increased with electrode rotation rate. This increase was attributed to the enhanced mass transport of inhibitor molecules toward the metal surface and formation of more protective films. Little decrease of efficiencies at higher rotation speeds was probably because of the separation of protective films due to high shear stresses.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Uhling · 1985
2. Predicting localized corrosion in seawater10.5006/1.3287826 ↗
3. Anodic dissolution of Armco iron in 0.5MH2SO4 in the presence of adsorbed chloride ions10.1016/0304-386X(95)00097-Z ↗
4. Atmospheric corrosion of different steels in marine, rural and industrial environments10.1016/S0010-938X(99)00005-0 ↗
5. Corrosion study of a carbon steel in neutral chloride solutions by impedance techniques10.1149/1.2119798 ↗
6. Influence of organic matter on orthophosphate corrosion inhibition for copper pipe in soft water10.1016/S0010-938X(03)00137-9 ↗
7. The effect of calcium ions on the adsorption of phosphonic acid: a comparative investigation with emphasis on surface analytical methods10.1016/0013-4686(94)E0034-W ↗
8. A corrosion inhibition study of a carbon steel in neutral chloride solutions by zinc salt/phosphonic acid association10.1016/0010-938X(95)00085-X ↗
9. Preliminary testing of Na2PO3F as a curative corrosion inhibitor for steel reinforcements in concrete10.1016/0008-8846(92)90111-8 ↗
10. Calcium mono fluorophosphate: a new class of corrosion inhibitors in NaCl medium10.1016/j.jelechem.2003.12.045 ↗
11. Corrosion control of galvanized steel using a phosphate/calcium ion inhibitor mixture10.1016/S0010-938X(02)00130-0 ↗
12. Inhibition of chloride localized corrosion of mild steel by PO43−, CrO42−, MoO42− and NO2− anions10.1016/S0169-4332(00)00016-7 ↗
13. Inhibition of steel pitting corrosion in HCl by some inorganic anions10.1016/j.apsusc.2004.07.014 ↗
14. Corrosion inhibition of copper in chloride solutions by pyrazole10.1016/S0010-938X(99)00080-3 ↗
15. Hydrodynamic effect on the behavior of a corrosion inhibitor film: characterization by electrochemical impedance spectroscopy10.1016/j.electacta.2005.11.020 ↗
16. The effect of molybdate concentration and hydrodynamic effect on mild steel corrosion inhibition in simulated cooling water10.1016/j.corsci.2005.06.009 ↗
17. Electrochemical behavior of stainless steel in aerated NaCl solutions by electrochemical impedance and rotating disk electrode methods10.1134/S1023193506040136 ↗
18. Electrochemical corrosion behavior of X-65 steel in the simulated oil sand slurry. I: effects of hydrodynamic conditions10.1016/j.corsci.2007.11.008 ↗
19. Electrochemical corrosion behavior of 90–10 Cu–Ni alloy in chloride-based electrolytes10.1023/B:JACH.0000031164.32520.58 ↗
20. The inhibition of copper–nickel alloy corrosion under controlled hydrodynamic condition in seawater10.1007/s10800-005-9101-z ↗
21. Aminotriazole as corrosion inhibitor of Cu–30Ni alloy in 3% NaCl in presence of ammoniac10.1016/j.electacta.2004.01.038 ↗
22. Behavior of the corrosion potential and corrosion current of Cu–Ni alloys under erosion corrosion conditions. Effect of oxygen10.1007/BF01022257 ↗
23. Use of a rotating cylinder electrode in corrosion studies of a 90/10 Cu–Ni alloy in 0.5molL−1 H2SO4 media10.1023/A:1004081212358 ↗
24. Flow influenced electrochemical corrosion of nickel aluminium bronze – Part I. Cathodic polarization10.1007/s10800-004-1758-1 ↗
25. Influence of flow on the corrosion inhibition of carbon steel by fatty amines in association with phosphonocarboxylic acid salts10.1016/j.corsci.2004.07.021 ↗
26. Determination of electrochemical parameters and corrosion rate of carbon steel in un-buffered sodium chloride solutions using a superposition model10.1016/j.corsci.2007.03.003 ↗
27. Evaluation of corrosion and erosion–corrosion resistances of mild steel in sulfide-containing NaCl aerated solutions10.1016/j.electacta.2007.05.034 ↗
28. Corrosion inhibition of carbon steel in alkaline chloride media by Na3PO410.1016/j.electacta.2007.03.003 ↗
29. Effect of hydrodynamic conditions on the inhibition performance of l-methionine as a “green” inhibitor10.1016/j.electacta.2008.08.024 ↗
30. Tait · 1994
31. Effect of chloride ions on the corrosion behavior of steel in 0.1M citrate10.1016/j.electacta.2005.05.011 ↗
32. Corrosion of a mild steel in agricultural irrigation waters in relation to partially blocked surface10.1016/S0013-4686(99)00155-3 ↗
33. Electrochemistry of non-aged 90–10 copper–nickel alloy (UNS C70610) as a function of fluid flow: Part 1: cathodic and anodic characteristics10.1016/j.electacta.2006.07.054 ↗
34. Corrosion behaviour of Cu–10Sn bronze in aerated NaCl aqueous media – electrochemical investigation10.1016/j.corsci.2007.01.013 ↗
35. Electrochemical corrosion of unalloyed copper in chloride media – a critical review10.1016/S0010-938X(02)00257-3 ↗
36. Bradford · 2001
37. Perez · 2004
38. A corrosion inhibition study of iron by phosphonic acids in sodium chloride solution10.1016/S0022-0728(03)00388-7 ↗
39. The inhibition of the corrosion of iron in neutral and alkaline solutions – I10.1002/jctb.5010090701 ↗
40. Effect of flow velocity and entrained sand on inhibition performances of two inhibitors for CO2 corrosion of N80 steel in 3% NaCl solution10.1016/j.corsci.2004.11.012 ↗
41. Formation and behaviour study of an environment-friendly corrosion inhibitor by electrochemical methods10.1016/j.electacta.2005.06.001 ↗
42. Corrosion inhibition and adsorption behavior of methionine on mild steel in sulfuric acid and synergistic effect of iodide ion10.1016/j.jcis.2007.01.038 ↗