Effect of H 3 BO 3 on corrosion in 0.01 M NaCl solution of the interface between low alloy steel A508 and alloy 52 M
Source abstract
Abstract
The corrosion of the low alloy steel A508-alloy 52 M interface region in buffered and non-buffered chloride containing solutions was studied by using the scanning vibrating electrode technique (SVET), scanning ion-selective electrode technique (SIET), and time of flight secondary ion mass spectroscopy (ToF-SIMS). The typical pit in low alloy steel A508 formed in NaCl solution was stopped immediately when HBO was added to the NaCl solution, and the pit became cathodic. With increasing immersion time, HBO entered into the pit, and the corrosion of A508 became general corrosion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Passivity breakdown, pit initiation and propagation of pits in metallic materials—review10.1016/j.corsci.2014.10.006 ↗
2. A new microelectrochemical method to study pit initiation on stainless steels10.1016/S0013-4686(70)01783-8 ↗
3. Micro- and nanotechniques to study localized corrosion10.1016/0013-4686(95)00072-M ↗
4. Pit initiation mechanism at MnS inclusions in stainless steel: synergistic effect of elemental sulfur and chloride ions10.1149/2.081310jes ↗
5. The composition of the boundary region of MnS inclusions in stainless steel and its relevance in triggering pitting corrosion10.1016/j.corsci.2004.05.023 ↗
6. SVET, AFM and AES study of pitting corrosion initiated on MnS inclusions by microinjection10.1016/S0010-938X(02)00222-6 ↗
7. A study on the initiation of pitting corrosion in carbon steel in chloride-containing media using scanning electrochemical probes10.1016/j.electacta.2010.06.024 ↗
8. Marsh · 1986 · 84
9. Studies by auger spectroscopy of pit initiation at the site of inclusions in stainless steel10.1016/0010-938X(90)90047-9 ↗
10. The initiation of pitting corrosion at MnS inclusions10.1016/0010-938X(93)90279-P ↗
11. Development of a coupled SECM-EQCM technique for the study of pitting corrosion on iron10.1149/1.2161574 ↗
12. Effect of pH and chloride on the micro-mechanism of pitting corrosion for high strength pipeline steel in aerated NaCl solutions10.1016/j.apsusc.2015.05.053 ↗
13. Mechanistic studies of atmospheric pitting corrosion of stainless steel for ILW containers10.1179/1743278214Y.0000000183 ↗
14. Real time pit initiation studies on stainless steels: the effect of sulphide inclusions10.1016/j.corsci.2006.10.025 ↗
15. Study of the effects of hydrogen on the pitting processes of X70 carbon steel with SECM10.1016/j.elecom.2010.10.031 ↗
16. The role of chloride ions in pitting of carbon steel studied by the statistical analysis of electrochemical noise10.1016/S0169-4332(99)00328-1 ↗
17. The use of local electrochemical probes and surface analysis methods to study the electrochemical behaviour and pitting corrosion of stainless steels10.1016/j.electacta.2007.01.079 ↗
18. Use of the electrochemical microcell technique and the SVET for monitoring pitting corrosion at MnS inclusions10.1016/j.elecom.2004.05.001 ↗
19. Corrosion inhibition by chromate and phosphate extracts for iron substrates studied by EIS and SVET10.1016/j.corsci.2005.05.021 ↗
20. Effects of NO2− ions on localised corrosion of steel in NaHCO3+NaCl electrolytes10.1016/j.electacta.2006.12.040 ↗
21. Effects of phosphate species on localised corrosion of steel in NaHCO3+NaCl electrolytes10.1016/j.electacta.2009.03.014 ↗
22. The role of inhibitors on the repassivation of pitting corrosion of carbon steel in synthetic carbonated concrete pore solution10.1016/j.electacta.2011.04.120 ↗
23. H+-selective microelectrodes with optimized measuring range for corrosion studies10.1016/j.snb.2014.07.106 ↗
24. Monitoring local spatial distribution of Mg2+, pH and ionic currents10.1016/j.elecom.2007.12.003 ↗
25. Sodium- and chloride-selective microelectrodes optimized for corrosion studies10.1016/j.jelechem.2013.07.034 ↗
26. J.R. Galvele, Transport processes and the mechanism of pitting of metals. 123 (1976), 464–474.
27. Cut-edge corrosion study on painted aluminum rich metallic coated steel by scanning vibrating electrode and micro-potentiometric techniques10.1016/j.electacta.2011.11.110 ↗
28. Localized electrochemical study of corrosion inhibition in microdefects on coated AZ31 magnesium alloy10.1016/j.electacta.2010.04.064 ↗
29. Davis-Besse Reactor Pressure Vessel Head Degradation. United States Nuclear Regulatory Commission, 2008, http://www.nrc.gov/reading-rm/doc-collections/nuregs/brochures/br0353/.
30. Effect of MnS inclusions on stress corrosion cracking in Low-Alloy steels10.5006/1.3315955 ↗
31. Effect of dissolved oxygen content on stress corrosion cracking of a cold worked 316L stainless steel in simulated pressurized water reactor primary water environment10.1016/j.jnucmat.2013.11.027 ↗
32. Effect of temperature and loading mode on environmentally assisted crack growth of a forged 316L SS in oxygenated high-temperature water10.1016/j.corsci.2014.06.035 ↗
33. Characterization of low alloy ferritic steel–Ni base alloy dissimilar metal weld interface by SPM techniques, SEM/EDS, TEM/EDS and SVET10.1016/j.matchar.2014.12.007 ↗
34. Precipitation and dispersion control of MnS by deoxidation products of ZrO2, Al2O3, MgO and MnO-SiO2 particles in fe-10 mass% ni alloy10.2355/isijinternational.46.480 ↗
35. Determination of dissolution time of Al2O3 and MgO inclusions in synthetic Al2O3–CaO–MgO slags10.1034/j.1600-0692.2003.20631.x ↗
36. Effect of probe tip inclination on the response of the scanning vibrating electrode technique to an idealised pit-like feature10.1016/j.electacta.2012.01.062 ↗
37. Scanning vibrating reference electrode technique: a calibration study to evaluate the optimum operating parameters for maximum signal detection of point source activity10.1016/j.electacta.2004.01.069 ↗
38. Effects of grain size on the corrosion resistance of wrought magnesium alloys containing neodymium10.1016/j.corsci.2012.01.021 ↗
39. Experimental and theoretical studies of thiazoles as corrosion inhibitors for mild steel in sulphuric acid solution10.1016/j.corsci.2011.05.027 ↗
40. Elucidation of a trigger mechanism for pitting corrosion of stainless steels using submicron resolution scanning electrochemical and photoelectrochemical microscopy10.1149/1.1838697 ↗
41. The role of inclusions on initiation of crevice corrosion of stainless steel10.1149/1.2096896 ↗
42. Dissolution and reaction of sulfide inclusions in stainless steel imaged using scanning laser photoelectrochemical microscopy10.1149/1.2221227 ↗
43. The solubility product of ferrous hydroxide and the ionization of the aquo-ferrous ion10.1021/ja01106a058 ↗
44. Pitting corrosion behaviour of austenitic stainless steels ?combining effects of Mn and Mo additions10.1016/j.corsci.2008.04.005 ↗
45. Pitting corrosion mechanism of Type 304 stainless steel under a droplet of chloride solutions10.1016/j.corsci.2006.08.016 ↗
46. Pitting corrosion of Type 430 stainless steel under chloride solution droplet10.1016/j.corsci.2010.02.031 ↗
47. Catherine Housecroft · 2005
48. Statistical study of pit propagation in carbon steel under nuclear waste disposal conditions10.1179/000705988798270785 ↗
49. Corrosion evolution of low alloy steel in deaerated bicarbonate solutions10.1016/j.jmst.2014.10.013 ↗