Evaluation of commercial alloys as cathode current collector for metal-supported tubular solid oxide fuel cells

Abstract Ferritic stainless steels have become promising candidate materials for interconnects in tubular metal-supported solid oxide fuel cell stacks. A number of ferritic alloys containing between 18 and 26 mass% Cr and discrete changes in minor alloying elements and reactive elements were isothermally oxidized at 800 °C in air and their electrical resistance was measured with the objective of obtaining an overview of the properties relevant for applications for cathode side interconnect. The alloys containing Mn showed a (Mn,Cr) 3 O 4 spinel layer on top of a Cr 2 O 3 oxide. The electrical conductivity of the steels forming this kind of oxide layer was higher than the measured for only Cr 2 O 3 former or oxide dispersion strengthened alloys and increased when the alloy contained Ti or Nb. Oxide scale spallation was observed for F18TNb and E-Brite, both containing Si. The influence of different cyclic oxidations was studied for the Crofer22APU steel, showing an irregular oxide growth as well as an increase in conductivity of the oxide scale formed when 12-h cycles were applied.