journal article·2025-08Open access

Porous ceramics via 3D printing and emulsion templating

Loïc Mathieu, Anne Aimable, Julie Bourret, Vincent Pateloup, Cécile Pagnoux

Abstract

Coupling foaming or emulsion templating techniques with additive manufacturing is a very efficient and innovative method for the elaboration of tailored materials with a hierarchical porosity . During this work, new formulations have been developed driven by a low toxicity to health and the environment approach, based on the combination of an emulsion with a vegetable oil, with no surfactant , and a suspension of halloysite. This mineral, with a nanotubular morphology, is known for its ability to stabilize Pickering emulsions . The emulsion template being directly transformed into porosity after thermal treatments was characterized at each step. At first, different formulations of emulsions without solid phase were studied in terms of stability, and droplets size and their dispersion. In a second step, the emulsions were enriched with the mineral phase. Robocasting process, also known as Direct Ink Writing (DIW), imposes both plasticity and consistency to the formulated pastes for optimal processing, which could be adjusted through both oil and solid fractions. The porosity of the printed ceramic structures was then evaluated after the elimination of the template and at different sintering temperatures . This approach allows to achieve complex geometries with high porosity, between 60 % and 70 % of the volume depending on the heat treatment, and a very good preservation of the shape of the printed objects and the pores created by the emulsion template.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Pickering emulsions and particle stabilization · Additive Manufacturing and 3D Printing Technologies · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Removal of organic aerosols from furnace flue gas by ceramic filters10.1021/ie400046z ↗
2. Mullite effect on the ceramic filters effectiveness in the removal of arsenic from borehole water from Burkina Faso10.1016/j.oceram.2024.100679 ↗
3. Alumina foam catalyst supports for industrial steam reforming processes10.1016/j.jeurceramsoc.2010.10.009 ↗
4. « porous ceramics prepared from 3D printed pickering emulsions as gold nanoparticle supports for reduction reactions10.1021/acsanm.3c04314 ↗
5. Fabrication and electrochemical properties of SOFC single cells using porous yttria-stabilized zirconia ceramic support layer coated with Ni10.1016/j.jeurceramsoc.2013.12.042 ↗
6. Exploiting kaolinite-alumina heteroaggregation in Pickering emulsion stabilisation and porous mullite fabrication10.1016/j.clay.2023.106881 ↗
7. 3D printing of hierarchical porous ceramics for thermal insulation and evaporative cooling10.1002/admt.202201109 ↗
8. 3D-Printed mullite-reinforced SiC-based aerogel composites10.1002/smll.202401742 ↗
9. Freeze-cast porous Al2O3/MgO ceramics as potential acoustic sound absorption
10. « Porous ceramics: light in weight but heavy in energy and environment technologies10.1016/j.mser.2020.100589 ↗
11. Processing routes to macroporous ceramics: a review10.1111/j.1551-2916.2006.01044.x ↗
12. Colloidal processing and partial sintering of high-performance porous zirconia nanoceramics with hierarchical heterogeneities10.1016/j.jeurceramsoc.2013.06.004 ↗
13. Electrically active and 3D porous TiO2-x ceramic scaffolds for bone tissue regeneration10.1016/j.jeurceramsoc.2016.09.032 ↗
14. « Processing of polymer-derived porous SiC body using allylhydridopolycarbosilane (AHPCS) and PMMA microbeads10.2109/jcersj2.119.563 ↗
15. Control of pore channel size during freeze casting of porous YSZ ceramics with unidirectionally aligned channels using different freezing temperatures10.1016/j.jeurceramsoc.2010.07.032 ↗
16. Microstructural control of self-setting particle-stabilized ceramic foams10.1111/j.1551-2916.2010.04040.x ↗
17. State-of-the-art research progress and challenge of the printing techniques, potential applications for advanced ceramic materials 3D printing
18. Vat photopolymerization 3D printing of alumina ceramics with low sintering temperature10.1016/j.ceramint.2024.08.089 ↗
19. High-strength, 3D interconnected alumina ceramic foams with high porosity comparable to aerogels10.1016/j.ceramint.2023.09.244 ↗
20. Microstructure and permeability of porous YSZ ceramics fabricated by freeze casting of oil-in-water suspension10.1016/j.jeurceramsoc.2020.05.067 ↗
21. Emulsion-templated high porosity mullite ceramics with sericite induced textured structures10.1016/j.matdes.2015.10.085 ↗
22. Three-dimensional interconnected porous TiO2 ceramics for high-temperature thermal storage10.1016/j.renene.2021.06.091 ↗
23. Aimable, « Porous granules by freeze granulation of Pickering emulsions stabilized with halloysite particles10.1016/j.colsurfa.2019.124156 ↗
24. Tailoring mechanical properties of highly porous polymer foams: silica particle reinforced polymer foams via emulsion templating10.1016/j.polymer.2006.03.114 ↗
25. Tailoring the microstructure and electrochemical performance of 3D microbattery electrodes based on carbon foams10.1002/ente.201900797 ↗
26. A review on porous ceramics with hierarchical pore structure by 3D printing-based combined route10.1080/21870764.2021.1981571 ↗
27. A review of 3D printed porous ceramics10.1016/j.jeurceramsoc.2022.02.039 ↗
28. 3D printing of emulsions and foams into hierarchical porous ceramics10.1002/adma.201603390 ↗
29. 3D printing of concentrated emulsions into multiphase biocompatible soft materials10.1039/C6SM02682F ↗
30. Polymerizable nonconventional gel emulsions and their utilization in the template preparation of low-density, high-strength polymeric monoliths and 3D printing10.1021/acs.macromol.8b02610 ↗
31. Direct ink writing of hierarchical porous alumina‐stabilized emulsions: rheology and printability10.1111/jace.17305 ↗
32. Y. Chung, S. S. L. Chan, K. Yoshida, et G. V. Franks, « Microstructure, thermal, and mechanical properties of hierarchical porous silicon carbide made by direct ink writing », Int. J. Appl. Ceram. Technol., vol. n/a, no n/a, p. e14949, doi: 10.1111/ijac.14949.10.1111/ijac.14949 ↗
33. 3D printing of multi-scale porous β-tricalcium phosphate scaffolds: mechanical properties and degradation10.1016/j.oceram.2024.100630 ↗
34. Hierarchical porous ceramics with distinctive microstructures by emulsion-based direct ink writing10.1021/acsami.2c03245 ↗
35. Water-in-Water emulsions stabilized by nanoplates10.1021/acsmacrolett.5b00480 ↗
36. Stabilization of water-in-water emulsions by nanorods10.1021/acsmacrolett.5b00953 ↗
37. Tuning the wettability of halloysite clay nanotubes by surface carbonization for optimal emulsion stabilization10.1021/acs.langmuir.5b03878 ↗
38. Equilibrium orientations of non-spherical and chemically anisotropic particles at liquid–liquid interfaces and the effect on emulsion stability10.1016/j.jcis.2015.02.069 ↗
39. Colloidal particles at fluid interfaces: behaviour of isolated particles10.1039/C8SM02048E ↗
40. Oil-in-water Pickering emulsions stabilized by phyllosilicates at high solid content10.1016/j.colsurfa.2014.09.037 ↗
41. Assembling kaolinite nanotube at water/oil interface for enhancing Pickering emulsion stability10.1016/j.clay.2019.02.021 ↗
42. Halloysite nanotubes and applications: a review
43. Properties and applications of halloysite nanotubes: recent research advances and future prospects10.1016/j.clay.2015.05.001 ↗
44. An assembly of organic-inorganic composites using halloysite clay nanotubes10.1016/j.cocis.2018.01.002 ↗
45. Poly(vinyl alcohol) as an emulsifying agent in vinyl polymerizations10.1021/ie51392a030 ↗
46. Procédés d’émulsification - Mécanismes de formation des émulsions
47. Investigation of reaction conditions for preparation of medium molecular weight poly(vinyl alcohol) as emulsifier
48. Thermoanalytical, kinetic and rheological parameters of commercial edible vegetable oils10.1023/B:JTAN.0000027128.62480.db ↗
49. Analysis of the thermal decomposition of commercial vegetable oils in air by simultaneous TG/DTA10.1023/B:JTAN.0000027124.96546.0f ↗
50. Structural characterization of the thermal transformation of halloysite by solid state NMR10.1007/BF03162561 ↗
51. Changes in structure, morphology, porosity, and surface activity of mesoporous halloysite nanotubes under heating10.1346/CCMN.2012.0600602 ↗
52. Porous mullite ceramics formed by direct consolidation using native and granular cold-water-soluble starches10.1111/jace.12852 ↗