Fabrication of micro electromagnetic actuator of high energy density
Source abstract
Abstract
This paper introduced a new technology to fabricate electromagnetic actuator of high energy density without enclosed magnetic circuit. This technology includes fabricating multi-turns planar microcoils and the thick magnetic (NiFe) core on the silicon wafer. The multi-turns planar microcoils were fabricated by the electroplating method from surface to along the line and dynamically controlling the current density of the copper electrolytes. In order to fabricate thick magnetic plating, the adhesion properties between the NiFe plating and the silicon substrates were improved by changing the surface roughness of silicon substrates and increasing the thickness of seed layer. Lastly, the micro electromagnetic actuator was tested and the energy density of actuator was evaluated by the force of testing. Experiment shows this microactuator is efficient in producing magnetic energy density, magnetic force and has flexibility in application.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Adhesion, Friction, and Surface Interactions · Electrical Contact Performance and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. A. Meckes, J. Behrens, W. Benecke, A microvalve with electromagnetic actuator, Actuator 98, 6th International Conference on New Actuators, 17–19 June 1998, Bremen, Germany.
2. J. Behrens, A. Mexkes, M Gebhard, et al, Electromagnetic actuation for micropump and valves, Actuator 96, 5th International Conference on New Actuators, 26–28 June 1996, Bremen, Germany.
3. Fully integrated magnetically actuated micromachined relays
4. M. Klopzig, A novel linear micromachined electromagnetic actuator including magnetic suspension, Actuator 98, 6th International Conference on New Actuators, 17–19 June 1998, Bremen, Germany.
5. Electro-magnetic planar micromotor and its fabrication
6. Design method and magnetic field analysis of axial-magnetized permanent magnet micromotor
7. Fabrication of microstructures with different aspect rations in a single layer10.1117/12.581894 ↗
8. Efficient magnetic microactuator with an enclosed magnetic core10.1117/1.1484161 ↗
9. Dynamic characteristics of membrane displacement of a bidirectional electromagnetic microactuator with microcoil fabricated on a single wafer10.1016/j.mee.2005.05.006 ↗
10. W.J. Jack, Magnetic Microactuators with Polysilicon Flexures. University of Berkeley Doctor Dissertation, 1994, 66–72.
11. A bidirectional magnetic microactuator using electroplated permanent magnet arrays10.1109/84.982866 ↗
12. Electroplating of low stress permalloy for MEMS
13. Edge effect during nanoindentation of thin copper films10.1016/j.matlet.2004.08.043 ↗
14. Experimental research on jet electroforming
15. The growth and adhesion properties research of the Cu/NiFe films on the silicon substrates
16. Study on fabrication process of planar stator coil of micromotor
17. Experiment research of plating technique of NiFe alloy
18. A study on plating soft magnetic underlayer for the rotor of micromotor
19. Permally electroplating through photoresist molds10.1016/S0924-4247(98)00323-9 ↗